buttons MERCEDES-BENZ E-Class 2005 W211 Comand Manual

13 At a glance
Radio operating elements
Function
Page
1
Audio main menu
36
2
Soft keys
(multifunction buttons)
3

- 
Entering frequency man-
ually
Storing stations
Requesting station pre-
sets
41
42
39
Function
Page
4
, , , 
Tuning stations FM / AM
Station memory,
selecting presets
38
42
5

Confirmation
6

Mute function
36
Function
Page
7

Switching ON/OFF
30
8


Volume adjustment
30
9
 and 
Station search
Manual tuning
38
40

15 At a glance
Single CD operating elements
Function
Page
1

Audio main menu
36
2
Soft keys
(multifunction buttons)
3
CD slot
46
4
 and

- 
Entering track numbers
48
Function
Page
5
 and 
Selecting tracks
48
6

Confirmation
7

CD ejection
46
Function
Page
8

Mute function
36
9

Switching ON/OFF
30
a


Volume adjustment
30
b
and 
Track skip forward/
reverse
Forward/reverse
47
49

17 At a glance
MP3 operating elements
Function
Page
1

Audio main menu
36
2
Soft keys
(multifunction buttons)
3
MP3 CD slot
53
4

and

- 
Entering track numbers
57
Function
Page
5
 and 
Selecting tracks
 and 
Selecting folders
55
54
6

Confirmation
7

MP3 CD ejection
53
Function
Page
8

Mute function
36
9

Switching ON/OFF
30
a


Volume adjustment
30
b
and 
Track skip forward/
reverse
Forward/reverse
56
58

19 At a glance
CD changer* operating elements
Function
Page
1

Audio main menu
36
2
Soft keys
(multifunction buttons)
3
 and

- 
Entering track numbers

- 
Selecting CDs
69
68
Function
Page
4
 and 
Selecting CDs
 and 
Selecting tracks
67
69
5

Confirmation
6

Mute function
36
Function
Page
7

Switching ON/OFF
30
8


Volume adjustment
30
9
and 
Track skip forward/
reverse
Forward/reverse
68
70

21 At a glance
Telephone* operating elements
Function
Page
1

Telephone main menu
Switching the telephone
ON
Switching the telephone
OFF
89
85
85
2
Soft keys
(multifunction buttons)
Function
Page
3

- 
Entering PIN
Entering unlock code
Entering phone number
Speed dial
87
88
92
95
4
, , , 
Selection buttons
5

Confirmation
Function
Page
6

Answering calls
Redialing
91
92
7

Ending or refusing a call
91
8

Switching ON/OFF
30
9


Volume adjustment
30

23 At a glance
Navigation* operating elements
Function
Page
1

Navigation main menu
Cancelling route
guidance
110
134
2

Switching map display
134
3
Soft keys
(multifunction buttons)
4
, , , ,,

Selecting options
Selecting characters for
text entry
Scrolling map
Function
Page
5

Confirmation
6
Navigation computer
107
7
Navigation DVD slot
107
8

Cancelling navigation an-
nouncements
Switching navigation an-
nouncements OFF
131
131
Function
Page
9

Current navigation an-
nouncement
Switching navigation an-
nouncements ON
131
131
a

Ejecting navigation DVDs
107
b

Switching ON/OFF
30
c


Volume adjustment
30

25 At a glance
Multifunction steering wheel
Switch the multifunction display to the re-
spective system if you wish to operate the
system using the buttons on the multifunc-
tion steering wheel. 
On the multifunction steering wheel,
pressè or ÿ repeatedly until
one of the following, Radio, Single CD,
MP3, CD changer*, Satellite radio* or
Telephone* display appears in the mul-
tifunction display of the instrument
cluster.
Radio operation
1Waveband and position in Preset menu
2Station frequencySingle CD operation
1Single CD operation
2Current track
MP3 operation
1MP3 operation
2Current trackCD changer* operation
1Current CD
2Current track
Satellite radio* operation
1SAT and position in Preset menu
2Channel nameSelecting the multifunction display

40 AudioRadio operation
Use , ,  or  to choose a
preset and press.
or

Press one of the number keys

- .
The system tunes to the station stored
under this number.
Tuning via scan search
Scan search is characterized as follows:

Scan search performs two runs.
During the first run, stations with ex-
tremely good reception are played.
During the second run, stations with
weaker reception are played.

Scan search plays each receivable sta-
tion for approx. 8 seconds.

Scan search can be ended manually.

Scan search automatically stops at the
station listened to before the scan
search was started.
Starting scan search

Switch to the desired waveband
(page 37).

Press the
Scan
soft key.
Scanning begins.
Ending Scan search manually

Press the
Scan
soft key again.Manual tuning

Switch to the desired waveband
(page 37).

Press and hold or  for at
least 2 seconds to tune up or down.
Manual tuning is activated.

Keep the button pressed or release it
and keep tapping or  in
quick succession.
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed or for as long as a button is
pressed and held.
Manual tuning is deactivated if no but-
ton is pressed for approx. 3 seconds.

41 Audio
Radio operation
Tuning via direct frequency input
Entry example:
98.5 MHz in FM waveband
Switch to the FM waveband
(page 37).

Press.The frequency input display appears.
The frequency range of the FM wave-
band is shown.

Press the number buttons in
succession:, , and .
Each number entered appears in the
display.
The system tunes to the frequency en-
tered (in this example: 98.5 Mhz) and
switches back to the FM menu.Tuning via station search
Seven channels are available on the
Weather Band.
On COMAND control unit

Switch to the WB waveband by press-
ing the
WB soft key in the Radio main
menu (page 37).
iManual tuning is also possible in all
wavebands by pressing or .
The frequency will change by the tuning
increments for the respective wave-
band each time one of the buttons is
pressed.
Frequency increments for manual
tuning:
FM 0.2 MHz

AM 10 kHz
iEntries outside the frequency range are
not possible.
Within the AM waveband, the input is
restricted to frequencies within the re-
spective frequency increment, which
is10 kHz.
The system will select the nearest valid
frequency if a frequency outside the
frequency increment is entered.Tuning to a station on Weather Band


62 AudioCD changer* operation
In order to insert CDs, you will need to first
access the CD changer (
page 61).1CD slot
2Magazine compartment buttons
The CD changer has a built-in magazine
which can hold up to six CDs.
The CD changer has six magazine compart-
ment buttons 2 for controlling the loading
procedure. LEDs in the buttons indicate
the status of the corresponding magazine
compartment.
!Do not attach labels of any type to the
CD. They may become detached and
damage the drive.
Only use CDs, which bear the label
shown and that conform to the com-
pact disc digital audio standard
(IEC 60908).
Do not play single-CDs (80 mm) with an
adapter. Only use round, 12 cm diame-
ter CDs.
!Your CD changer has been designed to
play CDs which correspond to the IEC
60908 standard. Therefore only CDs
not exceeding a thickness of 1.3 mm
can be used.
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the CD changer.iThe CD changer may not be able to play
audio CDs with copy protection.