instrument cluster MERCEDES-BENZ E-Class 2005 W211 Comand Manual

25 At a glance
Multifunction steering wheel
Switch the multifunction display to the re-
spective system if you wish to operate the
system using the buttons on the multifunc-
tion steering wheel. 
On the multifunction steering wheel,
pressè or ÿ repeatedly until
one of the following, Radio, Single CD,
MP3, CD changer*, Satellite radio* or
Telephone* display appears in the mul-
tifunction display of the instrument
cluster.
Radio operation
1Waveband and position in Preset menu
2Station frequencySingle CD operation
1Single CD operation
2Current track
MP3 operation
1MP3 operation
2Current trackCD changer* operation
1Current CD
2Current track
Satellite radio* operation
1SAT and position in Preset menu
2Channel nameSelecting the multifunction display

38 AudioRadio operation
The following options are available:
Tuning via station search (
page 38).

Tuning via station presets (
page 39).

Tuning via Autostore presets
(page 39).

Tuning via scan search (
page 40).

Manual tuning (
page 40).

Tuning via direct frequency input
(page 41).
Tuning via station search
On COMAND control unit

Switch to the desired FM or AM wave-
band (
page 37).

Press or :
The next receivable ascending frequen-
cy is tuned in and begins to play,
or

Press or :
The next receivable descending fre-
quency is tuned in and begins to play.
On multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the Radio display
(page 25).

Pressj:
The next receivable ascending frequen-
cy is tuned in and begins to play,
or
iThe wavebands cover different fre-
quency ranges.
FM broadcast band:
FM (VHF = very high frequency)
87.7 - 107.9 MHz

Tuning increments 0.2 MHz
AM broadcast band:

MW (medium wave)
530 - 1710 kHz

Tuning increments 10 kHz
WB waveband:

WB (Weather Band)
162.400 - 162.550 MHz

Tuning increments = 1 channel
Tuning to a FM/AM station

42 AudioRadio operation
The system will tune to the strongest
receivable station.

Press  or.
Search begins in ascending or
descending frequency.
The search stops at the next receivable
station.
On multifunction steering wheel

Switch the multifunction display in the
instrument cluster to Radio display
(page 25).

Pressj ork.
The search stops at the next receivable
station. Tuning via station presets
The seven strongest channels are sorted in
prest 1 to 7 each time you press the
WB soft
key. They are accessed using the number
keypad.

Press one of the number keys

- .
The system tunes to the station stored
under this number.
Ten presets each are available for the
FM and AM waveband.
The following options are available:

Storing manually using number keys

Storing manually using the Presets
menu

Storing using Autostore Storing manually using the number
keys
- 

Tune to the station to be stored
(page 38).

Press a number key between
and
 and hold it for more than 2 sec-
onds.
The station is now stored in the respec-
tive memory location.
Storing manually using the Presets
menu

Tune to the station to be stored
(page 38).

Press the
Presets
soft key.
The Presets menu appears.
Storing FM/AM stations

47 Audio
Single CD operation
1Track title or track number
2Elapsed track playing time
3Track number/total tracks
The Single CD main menu shows the track
title in the center if the CD contains corre-
sponding CD text data.
If the CD does not contain any CD text da-
ta, the track number is displayed instead of
the track title. The following options are available:

Selecting via track skip

Selecting via track list

Selecting via manual entry of the track
number (
page 48)

Selecting via scan search (
page 48)
Selecting via track skip
On the COMAND control unit

Open the Single CD main menu
(page 46).

Pressfor forward skipping.
or

Press for backward skipping.On the multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the Single CD dis-
play (
page 25).

Pressj for forward skipping.
or

Pressk for backward skipping.
Selecting a track
iForward skipping:
The next track is played.
Backward skipping:
The system skips back to the beginning
of the track if more than approx. 10
seconds playing time of the track cur-
rently playing have elapsed.
The system skips back to the beginning
of the previous track if less than 10
seconds playing time of the track cur-
rently playing have elapsed.

56 AudioMP3 operationSelecting via track skip
On the COMAND control unit
Open the MP3 main menu (
page 53).

Pressfor forward skipping.
or

Press for backward skipping.
On the multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the audio display
(page 25).

Pressj for forward skipping.
or

Pressk for backward skipping.Selecting via track list
The track list contains all tracks in the cur-
rent folder. Only one track can be viewed
at a time. 1Current track

Use or  to select another track
from the list.

Press, or wait approx. 3 seconds
without changing the selection.
The selected track is played.
iForward skipping:
The next track is played.
iBackward skipping:
The system skips back to the beginning
of the track if more than approx. 10
seconds playing time of the track cur-
rently playing have elapsed.
The system skips back to the beginning
of the previous track if less than 10
seconds playing time of the track cur-
rently playing have elapsed.

69 Audio
CD changer* operation
On the multifunction steering wheel
Switch the multifunction display in the
instrument cluster to the CD changer
display (
page 25).

Pressj for forward skipping.
or

Pressk for backward skipping.Selecting via track list
The track list contains all tracks of the cur-
rent CD. Only one list entry is visible at a
time, it is the track currently playing.

Use or  to select another track
from the list.

Press or wait approx. 3 seconds
without changing the selection.
The selected track is played.Selecting via manual entry of the track
number

Open the CD changer main menu
(page 66).

Press.
The Manual track input display ap-
pears. The number of tracks on the CD
is displayed.
Entry example: Track 1

Press
.
iForward skipping:
The next track is played.
Backward skipping:
The system skips back to the beginning
of the track if more than approx. 10
seconds playing time of the track cur-
rently playing have elapsed.
The system skips back to the beginning
of the previous track if less than 10
seconds playing time of the track cur-
rently playing have elapsed.


78 Satellite radio*Satellite radio operationExample 2: category
POP

In the station list, only channels of catego-
ry
POP
are available (category mode).

Use or  to select the category POP
from the list.
If the station listened to before was of
POP

category, the channel remains tuned.
Otherwise the system switches to the sta-
tion of
POP
category that was selected last
in this category.The system will automatically switch to a
station of
POP
category if the currently se-
lected station is not of the
POP
category.
Otherwise, the currently selected station
remains tuned.
Tuning a station within the selected
category
The channels identified for the currently
selected category are sorted numerically
by channel number, which appear in the
status bar one at a time.
Tuning using COMAND control unit

Press or .
The search proceeds in ascending or-
der.
or

Press or .The search proceeds in descending or-
der and stops at the first receivable
station.
Tuning using the multifunction steering
wheel

Switch the multifunction display in the
instrument cluster to Satellite radio
display (
page 25).

Pressk.
The search proceeds in ascending or-
der.
oriUsing oris followed by a short
delay before the change occurs. Using
 and changes the channel
immediately.

92 Telephone*Telephone operationEntering a phone number 
Open the Telephone main menu
(page 89).

Use -  to enter the phone num-
ber.
In case of erroneous entry, you can de-
lete the last or more digits.
Press the
Delete
soft key as often as
required.

After entering the phone number,
press.
The telephone dials the entered num-
ber. The call is activated the moment
the other party answers the call. Com-
munication is conducted via the hands-
free system. The volume can be adjust-
ed (
page 30).
For other user functions, see
“Active call” (
page 96).Initiating redial
On the COMAND control unit
Immediate re-dialing of the number dialed
last can be initiated:

Press in the Telephone main
menu twice.
The telephone establishes the connec-
tion with the number dialed last.
On the multifunction steering wheel

Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 25).

Presss twice.
The telephone establishes the connec-
tion with the number dialed last.In both cases the telephone initiates the
call. The call is activated the moment the
other party answers the call. Communica-
tion is conducted via the hands-free sys-
tem. The volume can be adjusted
(
page 30).
For other user functions, see
“Active call” (
page 96).
After switching to telephone operation,
COMAND can display the number of
missed calls in the status bar.
iWhen pressings only once, the di-
aled calls list appears in the multifunc-
tion display (
page 94).
Accepted and missed calls

95 Telephone*
Telephone operation
If a name in the phonebook is stored
with the number of the highlighted call
it is shown in the status bar.

Press the
ABC
soft key.
This switches the list to name display.
The number in the phone book that be-
longs to the highlighted name is shown
in the status bar.
Selecting a list entry and establishing the
connection:

Use or  to select the desired
entry.

Press.
The telephone initiates the call to the
selected number.On the multifunction steering wheel
Opening the list:

Switch the multifunction display in the
instrument cluster to the Telephone
main display (
page 25).

Presss once.
The last dialed call is displayed on the
multifunction display.
Selecting a list entry and establishing the
connection:

Pressj or k repeatedly until
the desired entry is shown on the mul-
tifunction display.

Presss
.
The telephone initiates the call to the
selected number.
On the cellular phone, telephone numbers
can be stored in a speed dial memory
(
Telephone Operation Guide).
You can retrieve the entries of the speed
dial memory via COMAND.

Open the Telephone main menu
(page 89).

Press a number key between
and
 and hold it for more than approx.
2 seconds.
The telephone establishes the connec-
tion with the stored number.
iIf you presss twice, the telephone
will immediately establish a connection
with the phone number dialed last.
Speed dial

96 Telephone*Telephone operationThe call is activated the moment the other
party answers the call. The call display ap-
pears. The duration of the call is displayed
in the status bar.
On the multifunction steering wheel a call
screen is displayed if the multifunction dis-
play in the instrument cluster is switched
to Telephone main display (
page 26).The following functions are available dur-
ing a call:

Ending the active call (
page 96)

Switching the hands-free microphone
ON/OFF (
page 96)

Transmitting number sequences
(page 97)
Ending the active call
On the COMAND control unit

Press.On the multifunction steering wheel

Presst
.
Switching the hands-free microphone
ON/OFF
The soft key
Mic Off
shows the status of the
microphone.
Microphone OFF: soft key =
Microphone ON: soft key =

Press the
Mic Off
soft key.
This switches the microphone OFF or
ON. The display of the soft key changes
accordingly.
The other party cannot hear you if the
microphone is switched OFF; however,
you can hear the other party.
Active call