headrest MERCEDES-BENZ E CLASS 2019 Owners Manual

Page 17 of 530

1Adjuststhe seats electrically→92
2Switchesthe seat heating on/off→95
3Switchesthe seatventilation on/off→97
4Switches AIRSCARF on/off→97
576Locks/unlocksthevehicle→67
6Opens/closesthe trunk lid→70
7Adjusts andfoldsthe outside mirrorsout/inelectrically
→12 6
8bOpens/closestheright side window→77
9bOpens/closestherearright side win‐dow
→77
AChild safety lockfortherear side windows→60
BbOpens/closestherear left side window→77
CbOpens/closesthe left side window→77
DOpensthe door→67
ESetsthe memory function→101
FSetsthe seatfore-and-aft adjustment→89
GAdjuststhe 4-waylumbar support→92
HSeat adjustment usingthe multimedia system→94
IAdjuststhe headrestraints→92
JAdjuststhe seat height→89
KAdjuststhe seat backrest inclination→89
Ataglance – Door control panel and seat adjustment15

Page 44 of 530

Status ofthe front passenger front airbag
Function ofthe automatic front passengerfront airbag shutoffThe automatic front passenger front airbag shut‐off is abletodetect whetherthe front passengerseat is occupiedbya person or achildrestraintsystem. The front passenger front airbag andfront passenger knee airbag are enabled or disa‐bled accordingly.
When installing achildrestraint system onthefront passenger seat, always make sure ofthefollowing:
REnsurethatthechildrestraint system is posi‐tioned correctly (→page47).
RAlways observethechildrestraint systemmanufacturer's installation instructions.
RNever place objects, e.g. cushions, under orbehindthechildrestraint system.
RFullyretractthe seat cushion length adjust‐ment.
RThe entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
RThe backrest oftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
RThechildrestraint system must nottouchtheroof or be put understrainbythe headrestraints.Adjustthe seat backrest inclina‐tion andthe headrestraint setting accord‐ingly.
\nWARNINGRisk of injuryor death duetoobjects betweenthe sitting surface andthechildrestraint system
Objects betweenthe sitting surface andthechildrestraint system could affectthe func‐tion ofthe automatic front passenger airbagshutoff.
This couldresult inthe front passenger air‐bag not functioning as intended during anaccident.
Do not place any objects betweenthesitting surface andthechildrestraintsystem.
The entire base ofthechildrestraintsystem must alwaysrestonthe sittingsurface ofthe front passenger seat.
The backrest oftheforward-facingchildrestraint system must, asfar as possi‐ble, beresting onthe seat backrest ofthe front passenger seat.
Always comply withthechildrestraintsystem manufacturer's installationinstructions.
A person onthe front passenger seat mustobservethefollowing information:
RFasten seat belts correctly (→page33).
RSit in an almost upright seat position withtheir back againstthe seat backrest.
RSit withtheirfeetresting onthefloor, if pos‐sible.
The front passenger front airbag mayotherwisebe disabledbymistake,forexample inthefol‐lowing situations:
RThe front passenger transferstheirweightbysupportingthemselves on avehicle armrest.
42Occupant safety

Page 57 of 530

far as possible, lieflat againstthe backrestofthevehicle seat.
sYou can havethe headrestraints oftherearseatsremoved and installedbyaqualifiedspecialistworkshop. This may be necessaryforthe use of certainchildrestraint sys‐tems.
sFor certainchildrestraint systems inweightgroup 2 or 3,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not beten‐sioned betweentheroof andthe seat cush‐ion and/or be installedfacingthe wrongdirection. Where possible, adjustthe seatcushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
1LATCH-type (ISOFIX) mounting bracket
Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
Removeandstowrelevant covers1.
AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting bracketsinthevehicle.
Havingremovedthechild seat,re-attach cov‐ers1.
SecuringTopTether
\nWARNINGRisk of injuryor death iftherear seat backrests are not locked afterinstallingTopTether belts
Iftherear seat backrests are not locked,theycouldfoldforwards intheevent of an acci‐dent or during braking or suddenchanges ofdirection.
As aresult,childrestraint systems cannotperformtheir intended protective function.Rear seat backreststhat are not locked canalso cause additional injuries, e.g. intheevent of an accident.
Always lockrear seat backrests afterinstallingTopTether belts.
Observethe lockverification indicator.
Ifthe seat backrest is not engaged and locked,this will be shown onthe multifunction displayonthe instrument cluster.
Occupant safety55

Page 58 of 530

Ifthechildrestraint system is equippedwith aTopTether belt:
Therisk of injury can bereducedbyTo pTether. TheTopTether beltfacilitates anadditional connection betweenthechildrestraint system attached withLATCH-type (ISOFIX) andthevehicle.
If necessary,moveheadrestraint1upwards (→page94).
Fold up cover2ofTopTether anchorage3.
InstalltheLATCH-type (ISOFIX)childrestraintsystem withTopTether. Always comply withthechildrestraint system manufacturer'sinstallation instructions when doing so.
GuideTopTether belt4under headrestraint1betweenthe two headrestraintbars.
HookTopTether hook5ofTopTether belt4without twisting intoTopTether anchor‐age3.
TensionTopTether belt4. Always complywiththechildrestraint system manufactur‐er's installation instructions when doing so.
Fold down cover2ofTopTether anchorage3.
If necessary,slide headrestraint1down‐wards (→page94). Make surethatyou donot interferewiththe correctrouting ofTo pTether belt4.
56Occupant safety

Page 59 of 530

Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
\nWARNINGRisk of injuryiftherearbenchseat/rear seat and seat backrestare not engaged
Iftherear benchseat/rear seat and seatbackrest are not engagedtheycouldfoldfor‐wards, e.g. when braking suddenly or intheevent of an accident.
RIfthis isthe case,thevehicle occupantwould beforced intothe seat beltbytherear benchseat/rear seat orbythe seatbackrest. The seat belt cannotprotect asintended and couldresult in additionalinjury.
RObjects or loads inthe trunk/cargo com‐partment cannotberestrainedbytheseat backrest.
Make surethatthe seat backrest andtherear benchseat/rear seat areengaged beforeeverytrip.
Ifthe seat backrest is not engaged and locked,this will be shown onthe multifunction displayonthe instrument cluster.
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sYou can havethe headrestraints oftherearseatsremoved and installedbyaqualifiedspecialistworkshop. This may be necessaryforthe use of certainchildrestraint sys‐tems.
sThe backrest oftheforward-facingchildrestraint system must, asfar as possible, be
resting onthe seat backrest oftherearseat.
sFor certainchildrestraint systems inweightcategory II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction. Where possible, adjusttheseat cushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
The seat belts onthefollowing seats are equip‐ped with a special seat beltretractor:
RFront passenger seat
RRear seats
When enabled,the special seat beltretractorensuresthatthe seat belts ofthe front
Occupant safety57

Page 61 of 530

Securingthechildrestraint system withtheseat belt onthe front passenger seat
When installing a belt-securedchildrestraintsystem onthe front passenger seat, alwaysobservethefollowing:
sObservethechildrestraint system manufac‐turer's installation and operating instruc‐tions.
sWhen using aforward-facingchildrestraintsystem in Group I:removethe headrestraint fromtherespective seat, if possi‐ble.
Whenyouremovethechildrestraint sys‐tem, installthe headrestraint again immedi‐ately and adjust allthe headrestraints cor‐rectly.
sThe backrestoftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
sFor certainchildrestraint systems inweightgroup II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction.Adjustthe seat backrestinclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sNever place objects under or behindthechildrestraint system, e.g. cushions.
The seat belt onthe front passenger side isequipped with a special seatbeltretractor.
When activated,the special seatbeltretractorensuresthatthe seat belt does not slacken oncethechildrestraint system is secured(→page 53).
Setthe front passenger seat asfar back aspossible and movethe seat intothe highestposition.
Fullyretractthe seat cushion length adjust‐ment.
Adjustthe seat cushion inclination sothatthe front edge ofthe seat cushion is inthe
highest position andtherear edge oftheseat cushion is inthe lowestposition.
Setthe seat backresttoan almostverticalposition.
Installthechildrestraint system.The entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
Always make surethatthe shoulder beltstrap is correctlyrouted fromthe seat beltoutlet ofthevehicletothe shoulder beltguide onthechildrestraint system.The shoulder beltstrap must beroutedfor‐wards and downwards fromthe seat belt out‐let.
If necessary,adjustthe seat belt outlet andthe front passenger seat accordingly.
Occupant safety59

Page 90 of 530

Notes onthe correct driver's seat position
\nWARNINGRisk of injuryfrom adjustingthevehicle settings whilethevehicle is inmotion
You could lose control ofthevehicle inthefollowing situations:
Rifyou adjustthe driver's seat,the headrestraint,thesteering wheel orthe mirrorwhilethevehicle is in motion
Rifyoufastenyour seat belt whilethevehi‐cle is in motion
Beforestartingthe engine: adjustthedriver's seat,the headrestraint,thesteering wheel orthe mirror andfastenyour seat belt.Ensurethefollowing when adjustingsteeringwheel1, seat belt2and driver's seat3:
Ryou are asfarawayfromthe driver's airbagas possible
Ryou are sitting in an upright position
Ryourthighs are slightlysupportedbythe seatcushion
Ryour legs are not fullyextended andyou candepressthe pedals properly
Rthe back ofyour head is supported ateyelevelbythe center ofthe headrestraint
Ryou can holdthesteering wheel withyourarms slightly bent
Ryou can moveyour legs freely
Ryou can see allthe displaysonthe instru‐ment cluster clearly
Ryou havea goodoverview ofthe traffic con‐ditions
Ryour seat belt is pulled snuglyagainstyourbody and isrouted acrossthe center ofyourshoulder and acrossyour hips inthe pelvicarea
88Seats andstowing

Page 91 of 530

Seats
Adjusting the front seat mechanically andelectrically (without Seat ComfortPackage)
\nWARNINGRisk of becoming trapped ifthe seats are adjustedbychildren
Children could become trapped iftheyadjustthe seats, particularly when unattended.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
Never leavechildren unattended inthevehicle.
The seats can be adjusted whenthe ignition isswitched off.
\nWARNINGRisk of becoming trappedwhen adjustingthe seats
Whenyou adjust a seat,you orothervehicleoccupants could become trapped, e.g. ontheseat guiderail.
When adjusting a seat, make surethatno one has any body parts inthe sweepofthe seat.
Observethe safety notes on "Airbags" and "Chil‐dren inthevehicle".
\nWARNINGRisk of accident duetothedriver's seat not being engaged
Ifthe driver's seat is not engaged, it couldmoveunexpectedly whilethevehicle is inmotion.
This could causeyoutolose control ofthevehicle.
Always make surethatthe driver's seatis engaged beforestartingthevehicle.
\nWARNINGRisk of injuryfrom adjustingthevehicle settings whilethevehicle is inmotion
You could lose control ofthevehicle inthefollowing situations:
Rifyou adjustthe driver's seat,the headrestraint,thesteering wheel orthe mirrorwhilethevehicle is in motion
Rifyoufastenyour seat belt whilethevehi‐cle is in motion
Beforestartingthe engine: adjustthedriver's seat,the headrestraint,thesteering wheel orthe mirror andfastenyour seat belt.
\nWARNINGRisk of becoming trapped ifthe seat height is adjusted carelessly
Ifyou adjustthe seat height carelessly,youorothervehicle occupants could be trappedandthereby injured.
Seats andstowing89

Page 92 of 530

Children in particular could accidentallypressthe electrical seat adjustment buttonsand become trapped.
While movingthe seats, make surethathands orother body parts do notgetunderthe lever assembly ofthe seatadjustment system.
\nWARNINGRisk of injuryduetoheadrestraints which are not installed or areadjusted incorrectly
If headrestraints are not installed or areadjusted incorrectly,the headrestraints can‐not provide protection as intended.
There is an increasedrisk of injury inthehead and neck area, e.g. intheevent of anaccident or when braking.
Always drive withthe headrestraintsinstalled.
Before driving off, make sureforeveryvehicle occupantthatthe center oftheheadrestraint supportsthe back ofthehead at abouteye level.
Do not interchangethe headrestraints ofthefront andrear seats. Otherwise,you will not beabletoadjustthe height and angle ofthe headrestraints correctly.
Adjustthe headrestraintfore-and-aft position sothat it is as close as possibletothe back ofyourhead.
\nWARNINGRisk of injuryor death duetoincorrect seat position
The seat belt does not offerthe intendedlevel of protection ifyou havenot movedtheseat backresttoan almostvertical position.
When braking or intheevent of an accident,you could slide underneaththe seat belt andsustain abdominal or neck injuries,forexam‐ple.
Adjustthe seat properlybefore begin‐ningyour journey.
Always ensurethatthe seat backrest isin an almostvertical position andthatthe shoulder section ofyour seat belt isrouted acrossthe center ofyour shoul‐der.
NOTEDamagetothe seats when movingthe seats back
The seats may be damagedbyobjects whenmovingthe seats back.
When movingthe seats back,makesurethatthere are no objects inthefootwell, under or behindthe seats.
90Seats andstowing

Page 94 of 530

Adjusting the front seat electrically
1Headrestraint height
2Seat backrest inclination
3Seat height
4Seat cushion length
5Seat cushion inclination
6Seatfore-and-aft position
Savethe settings withthe memory function(→page101).
Adjusting the 4-waylumbar support
1Toraise
2Tosoften
3Tolower
4Toharden
Using buttons1to4, adjustthe contourofthe backrest individuallytosuityour back.
Headrestraints
Adjusting the headrestraints onthe frontseats
\nWARNINGRisk of injuryfrom adjustingthevehicle settings whilethevehicle is inmotion
You could lose control ofthevehicle inthefollowing situations:
Rifyou adjustthe driver's seat,the headrestraint,thesteering wheel orthe mirrorwhilethevehicle is in motion
Rifyoufastenyour seat belt whilethevehi‐cle is in motion
Beforestartingthe engine: adjustthedriver's seat,the headrestraint,thesteering wheel orthe mirror andfastenyour seat belt.
92Seats andstowing

Page:   1-10 11-20 next >