remove seats MERCEDES-BENZ E CLASS 2019 Owners Manual

far as possible, lieflat againstthe backrestofthevehicle seat.
sYou can havethe headrestraints oftherearseatsremoved and installedbyaqualifiedspecialistworkshop. This may be necessaryforthe use of certainchildrestraint sys‐tems.
sFor certainchildrestraint systems inweightgroup 2 or 3,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not beten‐sioned betweentheroof andthe seat cush‐ion and/or be installedfacingthe wrongdirection. Where possible, adjustthe seatcushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
1LATCH-type (ISOFIX) mounting bracket
Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
Removeandstowrelevant covers1.
AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting bracketsinthevehicle.
Havingremovedthechild seat,re-attach cov‐ers1.
SecuringTopTether
\nWARNINGRisk of injuryor death iftherear seat backrests are not locked afterinstallingTopTether belts
Iftherear seat backrests are not locked,theycouldfoldforwards intheevent of an acci‐dent or during braking or suddenchanges ofdirection.
As aresult,childrestraint systems cannotperformtheir intended protective function.Rear seat backreststhat are not locked canalso cause additional injuries, e.g. intheevent of an accident.
Always lockrear seat backrests afterinstallingTopTether belts.
Observethe lockverification indicator.
Ifthe seat backrest is not engaged and locked,this will be shown onthe multifunction displayonthe instrument cluster.
Occupant safety55

Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
\nWARNINGRisk of injuryiftherearbenchseat/rear seat and seat backrestare not engaged
Iftherear benchseat/rear seat and seatbackrest are not engagedtheycouldfoldfor‐wards, e.g. when braking suddenly or intheevent of an accident.
RIfthis isthe case,thevehicle occupantwould beforced intothe seat beltbytherear benchseat/rear seat orbythe seatbackrest. The seat belt cannotprotect asintended and couldresult in additionalinjury.
RObjects or loads inthe trunk/cargo com‐partment cannotberestrainedbytheseat backrest.
Make surethatthe seat backrest andtherear benchseat/rear seat areengaged beforeeverytrip.
Ifthe seat backrest is not engaged and locked,this will be shown onthe multifunction displayonthe instrument cluster.
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sYou can havethe headrestraints oftherearseatsremoved and installedbyaqualifiedspecialistworkshop. This may be necessaryforthe use of certainchildrestraint sys‐tems.
sThe backrest oftheforward-facingchildrestraint system must, asfar as possible, be
resting onthe seat backrest oftherearseat.
sFor certainchildrestraint systems inweightcategory II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction. Where possible, adjusttheseat cushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
The seat belts onthefollowing seats are equip‐ped with a special seat beltretractor:
RFront passenger seat
RRear seats
When enabled,the special seat beltretractorensuresthatthe seat belts ofthe front
Occupant safety57

Cup holder
Installingthe cup holder in orremoving itfrom the center console (automatic trans‐mission)
\nWARNING‑ Risk of accident or injurywhen usingthe cup holder whilethevehicle is moving
The cup holder cannot secure containerswhilethevehicle is moving.
Ifyou use a cup holder whilethevehicle ismoving,the container may beflung aroundand liquids may be spilled. Thevehicle occu‐pants may come into contact withthe liquidand if it is hot,theycould be scalded.Yo ucould be distracted from traffic conditionsandyou may lose control ofthevehicle.
Only usethe cup holder whenthevehi‐cle isstationary.
Only usethe cup holderfor containersoftheright size.
Closethe container, particularlyiftheliquid is hot.
Toremove:slide catch2forwards and pullout cup holder1.
Toinstall:insert cup holder1and slideback catch2.
The cup holderrubber mat can beremovedfor cleaning, e.g. using clean, lukewarmwater.
Function ofthe cup holder intherear benchseat
There isroomfor two cups of upto17fl. oz.(0.5 l) inthe cup holder1.
Seats andstowing111

Ashtray and cigarettelighter
Usingthe ashtrayinthe front center console
NOTEDamagetothestowage compart‐ment underthe ashtray
Thestowage compartment underthe ashtrayis not heatresistant and could be damaged ifyouresta lit cigaretteon it.
Make surethatthe ashtrayis fullyengaged.
Toopen:push up cover2ofthe ashtrayonitsright or left side.
Toremovethe insert:press insert1upwards slightly and pull it out upwards.
Tore-installthe insert:press insert1intothe holder until it engages.
Usingtherear passenger compartment ash‐tray
Toopen:pull cover2outbyitstop handleedge.
Toremovethe insert:pushribbing3fromthe left side and pull insert1upwards andout.
Toinstallthe insert:install insert1fromaboveand press down intothe holder until itengages.
Usingthe cigarettelighter
\nWARNING‑ Risk offireand injury fromhot cigarettelighter
You can burnyourself ifyoutouchthe hotheating element orthe socket ofthe ciga‐rette lighter.
In addition,flammable materials may igniteif:
Ryou dropthe hot cigarettelighter
Rachild holdsthe hot cigarettelightertoobjects,forexample
Always holdthe cigarettelighterbytheknob.
Always make surethatthe cigarettelighter is out ofreach ofchildren.
Never leavechildren unattended inthevehicle.
11 2Seats andstowing

Requirements:RThe ignition is switched on.
Press in cigarettelighter1.The cigarettelighter will pop out automati‐cally whenthe heating element isred-hot.
Sockets
Using the12V socketintherear passengercompartment
Requirements:ROnly connect devices uptoa maximum of180watts (15 A).
Pull cover2outbyitstop handle edge.
Removeblind plug1fromthe socket andinsertthe plug ofthe device.
Usingthe12V socketinthe front passengerfootwell
Requirements:ROnly connect devices uptoa maximum of180 W (15 A).
Lift up socket cap1.
Makesurethat no cables arerunningthrough or secured inthe airbag deploymentarea when usingthe socket. Observethenotes on airbag protection when doingthis(→page 40).
Seats andstowing11 3

RThecharging function and wireless connec‐tion ofthe mobile phonetothevehicle'sexterior antenna are onlyavailable ifthe igni‐tion is switched on.
RSmall mobile phones may not be abletobecharged inevery position ofthe mobilephonestowage compartment.
RLargemobile phones which do notrestflat inthe mobile phonestowage compartment maynot be abletobecharged or connected withthevehicle'sexterior antenna.
RThe mobile phone may heat up duringthecharging process. The mobile phone can becooled inthe mobile phonestowage com‐partment whenthe air conditioning system isswitched on. The cooling output inthemobile phonestowage compartment is high‐est whenthe controller intheglove box isclosed.
RToensure more efficientcharging and con‐nection withthevehicle'sexterior antenna,removethe protective cover fromthe mobilephone.
RWhencharging,the mat should be used ifpossible.
Wirelesscharging ofthe mobile phone
Requirements:RThe mobile phone is suitablefor wirelesscharging (Qi-compatible mobile phone).Yo ucanfind a listof Qi-compatible mobilephones at:
http://www.mercedes-benz.com/connect
Placethe mobile phone as closetothe cen‐ter of mat1as possible withthe displayfacing upwards.Whenthecharging symbol is shown inthemultimedia system,the mobile phone isbeingcharged.
Malfunctions duringthecharging process areshown inthe multimedia system display.
The mat can beremovedfor cleaning, e.g.using clean, lukewarmwater.
Installing andremoving thefloor mats
\nWARNINGRisk of accident duetoobjects inthe driver'sfootwell
Objects inthe driver'sfootwell may impedepedal travel or block a depressed pedal.
This jeopardizesthe operating androadsafety ofthevehicle.
Stowall objects inthevehicle securelysothattheycannotgetintothe driver'sfootwell.
Seats andstowing11 5

Always installthefloor mats securelyand as prescribed in ordertoensurethatthere is always sufficientroomforthe pedals.
Do not use loosefloor mats and do notplacefloor mats ontop of one another.
Toinstall:pressstud1into holder2.
Toremove:pullthefloor mat off holders2.
11 6Seats andstowing

The tire pressuretable shows therecommendedtire pressurefor all tires approvedforthisvehi‐cle. Therecommended tire pressures applyforcold tires undervarious operating conditions, i.e.loading and/or speed ofthevehicle.
If one or more tire sizes precede a tire pressure,the tire pressure informationfollowing is onlyvalidforthose tire sizes.
The load conditions "partially laden" and "fullyladen" are defined inthetablefor different num‐bersof passengers and amounts of luggage. Theactual number of seats may differ fromthis.
Some tire pressuretables only showtherimdiameter instead ofthe completetire size, e.g.R18. Therim diameter is part ofthe tire size andcan befound onthe tire sidewall (→page 400).
Be suretoalso observethefollowing furtherrelated subjects:
RNotes on tire pressure (→page 386)
RTireand Loading Information placard(→page 393)
RMaximum tire pressure (→page 399)
Checking tire pressures manually
Readthe tire pressureforthe current operat‐ing conditions fromtheTireand LoadingInformation placard orthe tire pressuretable. Observethe notes on tire pressure.
Removethevalve cap ofthe tiretobechecked.
Pressthe tire pressuregauge securely ontothevalve.
Readthe tire pressure.
Ifthe tire pressure is lowerthantherecom‐mendedvalue, increasethe tire pressuretotherecommendedvalue.
Ifthe tire pressure is higherthantherecom‐mendedvalue,release air.Todo so, pressdownthe metal pin inthevalve, e.g. usingthe tip of a penforexample. Thencheckthetire pressureagain usingthe tire pressuregauge.
Screwthevalve cap ontothevalve.
388Wheels and tires