MERCEDES-BENZ E CLASS 2023 Owners Manual

!

The following entries can be made, for example:
= City, street, house number
= Street, city
= ZIP code
= POI name or POI category, e.g. Parking
= Contact nameSelect a search result in list 3.Calculate the route (  page 250).\bYou can Nnd further information about desti-
nation entry, e.g. three-word addresses, in the Digital Operator\bs Manual.
Changing country
Select the indicator for federal state or prov-
ince 1.Select the federal state or the province in 1.Enter the country indicator.Select the country on list 3.Select the federal state or the province from
list 3.Using online search\bRequirements: the media display shows an
Internet connection in the status line with the Q symbol.
Destination entry uses online map services. If the
on-board search Nnds no suitable destinations or
if you change countries, the online search is avail- able.
For the destination you can enter an address, a POI or a three-word address.
Enter the destination in input line 2.
The search results are displayed.Select the destination in the list.
The detailed view for the route is displayed.
or
Select country indicator 1.Select the provider for the online service from
the countries list.Enter the destination in input line 2.Select the destination in the list.Calculating a route and using settings for route
guidance
Requirements
= The destination has been entered.
= The destination address is shown.
Multimedia system: 4 © 5
Navigation
1¥ No route yet.¦ A route has been mapped.250MBUX multimedia system

Select ¥.
The route to the destination is calculated.
Route guidance begins.
or
Select ¦.Select Set as Waypoint .
The destination address is set as the next
intermediate destination.
or
Select Start New Route Guidance .
The destination address is set as the new des-
tination. The previous destination and the intermediate destinations are deleted. Route
guidance to the new destination begins.
Selecting route settings
Select =.Select Advanced .Select Route.Select the route type.Take traPc information into consideration with
Dynamic Route Guidance H .Select route options with Avoid Options.Activate Suggest Alternative Route .
Alternative routes are calculated for every
route.Activate Activate Commuter Route .
If the requirements are met, the multimedia
system automatically detects that the vehicle
is on a commuter route. Route guidance
begins without voice output.
Activating route guidance with augmented reality
During route guidance, tap on the camera
symbol on the media display. The camera image will be shown instead of
the navigation map before a turning maneuver and will show additional information.To return to the navigation map: tap on the
camera symbol again.
Displaying additional information in the camera
image
Select =.Select Advanced .Select Augmented Reality .Activate Street Names and House Numbers .
During route guidance, street names and house numbers are shown in the camera
image.
Using map functions
Multimedia system:
4 © 5
Navigation
Setting the map scale
To zoom in: tap twice quickly with one Nnger
on the media display.To zoom out: tap with two Nngers on the
media display.
Moving the map
Move one Nnger in any direction on the
touchscreen.To reset the map to the current vehicle posi- tion: press = brieOy.MBUX multimedia system251

Selecting map orientationTap repeatedly on the

Select View.Select Map Elements .Scroll up and show the ONLINE MAP CON-
TENT category.Switch on a service, e.g. Weather.
Current weather information is displayed on
the navigation map, e.g. temperature or cloud
cover.
Parking service
*NOTE Damage to the vehicle due to not
observing the maximum permitted head-
room clearance
If the vehicle height is greater than the maxi- mum permitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged.
Observe the signposted headroom clear- ance.If the vehicle height is greater than the permitted headroom clearance, do not
enter.Observe the changed vehicle height with add-on roof equipment.*NOTE Vehicle damage due to failure to
observe local information and parking
conditions
The data is based on the information provided
by the respective service providers.
Mercedes-Benz does not guarantee the accu-
racy of the information provided in relation to
the car park or parking area.
Always observe the local information and
conditions.\bThis service is not available in all countries.Select = and activate Parking.Tap on ] in the map.Select a parking option.
The map shows the parking options in the
vicinity.The following information is displayed (if avail- able):
= Destination address, distance from current
vehicle position and arrival time
= Information on the parking garage/parking
lot, e.g.
- Opening times
- Parking charges
- Current occupancy
- Maximum parking time
- Maximum access height
The maximum access height shown by the parking service does not replace
the need for observation of the actual
circumstances.
= Available payment options (Mercedes pay,
coins, bank notes, cards)
= Details on parking tariMs
= Number of available parking spaces
= Payment method (e.g. at parking meters)
= Services/facilities at the parking optionMBUX multimedia system253

=Telephone numberCalculate the route (  page 250).
Notes on the dashcam
*NOTE Risk of legal consequences follow-
ing violation of legal regulations and data
protection requirements
You are legally responsible for operation and
use of the dashcam functions.
The legal requirements relating to operation
and use of the dashcam can vary depending
on the country in which the dashcam is oper-
ated.
This function is not permitted in all countries.
Before using the dashcam, read up on
the content of the legal regulations, in
particular the data protection require-
ments in the respective country of use.Observe the legal regulations, in particu-
lar the data protection requirements.Selecting a USB device for a video recording with the dashcam
Requirements: = At least one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam
Select the USB device.\bWhen USB devices contain multiple partitions,
recorded video Nles are not always displayed
in the recording list. Mercedes-Benz recommends that you use
USB devices with one partition.
Starting or stopping video recording with the dashcam
Requirements: = A USB device is connected with the multime-
dia system .
= The vehicle is switched on.
Multimedia system:
4 © 5
Mercedes me & Apps
5 DashcamIf several USB devices are connected with the
multimedia system, select a USB device
(  page 254).Select the Individual Recording or Loop
Recording recording mode.
If Individual Recording is selected and the
memory is full the recording stops.
If Loop Recording has been selected, several
short video Nles are recorded. When the mem-
ory limit is reached, the oldest video Nle is
deleted and recording is continued automati-
cally.To start: select Start Recording .
The length of the recording is shown. The Please do not remove the storage medium.
message appears. The video Nle is stored on
the USB device.To end: select End Recording .254MBUX multimedia system

A report may appear in the following cases:= For the Individual Recording recording mode:
the memory is full or there are only a few
minutes recording time available. The video
recording stops or will be stopped imminently.
Change the USB device or delete a video Nle.
= If a video recording has started and a national
border is detected, the National Border
Crossed. Please observe the country-spe-
cific regulations on video recording. message
appears.
This function is not available in all countries.
= The camera is not functional, the Camera
Unavailable message appears.
Have the camera checked in an authorized
Mercedes-Benz Center.Telephone
Telephony

q Notes on telephony
&WARNING Risk of distraction from operat-
ing integrated communication equipment
while the vehicle is in motion
If you operate communication equipment inte-
grated in the vehicle when driving, you could
be distracted from the traPc situation. This
could also cause you to lose control of the
vehicle.
Only operate this equipment when the
traPc situation permits.If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and traPc conditions and operate the
equipment with the vehicle stationary.&WARNING Risk of accident from operating
mobile communication equipment while
the vehicle is in motion
Mobile communication devices distract the
driver from the traPc situation. This can also
cause the driver to lose control of the vehicle.
As a driver, only operate mobile commu-
nication devices when the vehicle is sta-
tionary.As a vehicle occupant, use mobile com-
munication devices only in the designa-
ted area, e.g. in the rear passenger com-
partment.You must observe the legal requirements for the
country in which you are currently driving when
operating mobile communication equipment in
the vehicle.&WARNING Risk of injury due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incorrectly, they can slide or be thrown around
MBUX multimedia system255

and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone receptacles cannot always retain all
objects within.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.Always stow objects so that they cannot
be thrown around in such situations.Always make sure that objects do not
protrude from stowage spaces, parcel
nets or stowage nets.Close the lockable stowage spaces before starting a journey.Always stow and secure heavy, hard,
pointed, sharp-edged, fragile or bulky
objects in the trunk/cargo compart-
ment.Observe the additional information on stowing
mobile communications devices correctly:
= Loading the vehicle (  page 105)
Bluetooth n
!

qTelephone menu overview1Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone2Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone
(two phone mode)3Battery status of the connected mobile phone4Signal strength of the mobile phone network5Options6Device manager7Messages8Numerical pad9Contact search
q Telephony operating modes overview
Depending on your equipment, the following tel- ephony operating modes are available:
= A mobile phone is connected to the multime-
dia system via Bluetooth n
.MBUX multimedia system257

=Two mobile phones are connected with the
multimedia system via Bluetooth n
(two phone
mode).
- You can use all the functions of the multi-
media system with the mobile phone in the foreground.
- You can receive incoming calls and mes-
sages with the mobile phone in the back- ground.
You can interchange the mobile phone in the foreground and background.

q Connecting a mobile phone
Requirements
= Bluetooth n
is activated on the mobile phone
(see the manufacturer\bs operating instruc- tions).
= Bluetooth n
is activated on the multimedia sys-
tem.Multimedia system:
4 © 5
Phone
Searching for a mobile phoneSelect