MERCEDES-BENZ E-CLASS COUPE 2018 Owner's Manual

Page 241 of 486

#Pressthe WPS button on the device tobe
connec ted.
#Select &RQWLQXH inthe multimedia sy stem.
#Using a security key:highlight a Wi-Fi net‐
wo rkinthe list.
#Select ¥&RQQHFW 8VLQJ 6HFXULW\ .H\.
#Have the security keydispla yed on the device
to be connec ted (see the manufacturer's
operating instructions).
#En terth is security keyon the multimedia sys‐
te m.
#Confirm the ent rywith ¡.
% All devices support a security keyas a
mean sof connection .
Device ha salread ybeen connec ted
#To automatically connect: highlight aWi-Fi
network in the list.
#Ac tivate O¥ &RQQHFW $XWRPDWLFDOO\ .
#Toconnect: highlight a Wi-Fi network in the
list.
#Select ¥&RQQHFW .
The connection is es tablished again. These
functions are possible when the device has
already been connected totheWi -Fi networ k.
Setting up a Wi-Fi hotspot
Multimedia sy stem:
,6\VWHP.ö &RQQHFWLYLW\
Configuring the multimedia sy stem as a Wi-
Fi hotspot
The type of connection es tablished depends on
th e device tobe connec ted. The function must
be suppor tedby the multimedia sy stem and by
th e device tobe connec ted. The type of connec‐
tion es tablished must be selected on the multi‐
media sy stem and on the device tobe connec‐
te d.
#Select 6HW 8S +RWVSRW .
#Highlight&RQQHFW 'HYLFH WR 9HKLFOH +RWVSRW .
#Togenerate a WPS PIN: select¥&RQ
QHFW YLD :36 3,1 *HQHUDWLRQ .
#Enterth e PIN shown in the multimedia sys‐
te m display on the device tobe connec ted
and con firm .
#Connect via WPS pin: select¥&RQ
QHFW YLD :36 3,1 ,QSXW .
#Select(QWHU :36 3,1.
#Enterth e PIN that is shown on theex tern al
device's display on the multimedia sy stem.
#Select &RQWLQXH.
#Toconnect bypressing a button: select
¥ &RQQHFW YLD :36 3%&.
#Press the push button on the device tobe
connec ted.
#Select &RQWLQXH.
#Toconnect via a security key:select &RQ
QHFW 'HYLFH WR 9HKLFOH +RWVSRW.
A security keyis displa yed.
#Select theve hicle from the device tobe con‐
nec ted. The vehicle is displa yed with the
SSID 0% +RWVSRW ;;;;; .
Multimedia system 239

Page 242 of 486

#Enterthe security keywhic his shown in the
multimedia sy stem display on the device to
be connec ted.
#Confirm the ent ry.
To generate a new security key:
#Select 6HW 8S +RWVSRW .
#Select*HQHUDWH 6HFXULW\ .H\.
#Select*HQHUDWH 6HFXULW\ .H\.
A connection will be es tablished with the
newly crea ted security key.
#Tosave a security key:select 6DYH.
When a new security keyis sa ved, all existing
Wi -Fi connections are then disconnected. If
th eWi -Fi connections are being re-es tab‐
lished, the new security keymus tbe en tere d.
Au thorizing a COMAND Touch device
Re quirementsRThe COMAND Touch App isins talled on the
ex tern al device (e.g. tablet) which is tobe
used as a Rear Seat En tertainment Sy stem
unit.
RWi -Fi is acti vated (→page 238) and the mul‐
timedia sy stem is confi gured as a Wi-Fi Hot‐
spot (
→pa ge 239).
Multimedia sy stem:
,6\VWHP.&20$1' 7RXFK
Connecting a new device
#Select $XWKRUL]H D 1HZ 'HYLFH.
#Select&RQQHFW 1HZ 'HYLFH.
A security keyis displa yed.
#En terth e security keyin theex tern al device.
The 3OHDVH VWDUW &20$1' 7RXFK RQ \RXU
GHYLFH DQG IROORZ WKH LQVWUXFWLRQV 7KH $SS
LV DYDLODEOH LQ WKH $SS 6WRUH message
appears.
Selecting an already connected device
#Select $XWKRUL]H D 1HZ 'HYLFH.
The devices already connec ted are displa yed.
#Select &RQWLQXH 8VLQJ &RQQHFWHG 'HYLFHV.
The 3OHDVH VWDUW &20$1' 7RXFK RQ \RXU
GHYLFH DQG IROORZ WKH LQVWUXFWLRQV 7KH $SS
LV DYDLODEOH LQ WKH $SS 6WRUH message
appears.
Ac tivating/deactivating the COMAND Touch
ch ild saf ety lock
Multimedia sy stem:
,6\VWHP.&20$1' 7RXFK
Child saf ety lock
#Switch 3DUHQWDO &RQWURO onO or off ª.
The content displa yed on theex tern al device
can only be set on the multimedia sy stem.
Sy stem language
Note s onthe sy stem language
This function allo wsyouto determ ine the lan‐
guage forth e menu displa ysand the navigation
announcements. The selected language af fects
th ech aracters available for entr y.The navigation
announcements are not available in all lan‐
guages. If a language is not available, the naviga‐
tion announcements will be in En glish.
Setting the sy stem language
Multimedia sy stem:
,6\VWHP./DQJXDJH
#Set the language.
24 0
Multimedia sy stem

Page 243 of 486

%Ifyo u are using Arabic map data, thete xt
information can also be shown in Arabic on
th e navigation map. Todo so, select ةيبرعلاas
th e language from the language list. Naviga‐
tion announcements are then also made in
Arabic.
Setting the distance unit
Multimedia sy stem:
,6\VWHP.8QLWV
#Select NPorPL.
#Switch $GGLWLRQDO 6SHHGRPHWHU onO todis‐
play in the instrument clus ter's multifunction
displa y.
Data impor tand export
Data import/export function
The following functions are possible:
Rtransfer ring da tafrom one sy stem or vehicle
to ano ther sy stem or vehicle.
Rcreating a bac kup copy of your personal data
and loadin git again.
Rpr otecting your personal data against un wan‐
te dex port with PIN pr otection.
Yo u can either use an SDcard or a USB storage
device as temp orary storage.
% Please no tethat the NTFS file sy stem is not
suppor ted. The FAT32 file sy stem is recom‐
mended.
Importing/exporting data
* NO
TEData loss
#Do not remo vethe data storage
medium when data is being expor ted.
Mercedes-Benz is not liable for any loss of
data.
Re quirementsRThe vehicle is stationar y.
RThe ignition is switched on or theve hicle has
been star ted.
RThe SD card is inser ted (→page 287) or the
USB device is connecte d (→page 290).Multimedia sy
stem:
,6\VWHP.6\VWHP %DFNXS
#Select ,PSRUW 'DWD or([SRUW 'DWD .
Importing
#Select a data storage medium.
A prom ptappears asking whe ther youre ally
wish to overwrite the cur rent da ta. If da ta
originates from ano ther vehicle, this is recog‐
nized duri ng datareading.
The multimedia sy stem is restar ted once the
data has been impor ted.
% Current vehicle settings can be edited af ter
th e import.
Exporting
If PIN pr otection is activated, your PIN is reques‐
te d.
#En teryo ur four-digit PIN.
#Select a data storage medium.
The data is expor ted. The data export may
ta ke several minutes.
Multimedia sy stem 24
1

Page 244 of 486

Activating/deactivating PIN pr otection for
data export
Multimedia sy stem:
,6\VWHP.6\VWHP %DFNXS
#To activate: activate3,1 3URWHFWLRQ O.
#Enteryour four-digit PIN.
#En teryo ur four-digit PIN again.
PIN protection is activated when bo thPINs
match.
#To deactivate: deactivate3,1 3URWHFWLRQ ª.
#Enteryour four-digit PIN.
% Ifyo u ha veforg ottenyo ur PIN, an authorized
Mercedes-Benz Cente r can deactivateyour
PIN protection foryo u.
Alternat ively: you can deactivate PIN protec‐
tion byresetting your personal data
(
→page 243).
User profile
Selecting a user profile
Multimedia sy stem:
,6\VWHP.g 3HUVRQDOL]DWLRQ
#Select *XHVW 3URILOH or individual profile #.
% Some settings from the user profile are only
loaded when theve hicle is stationary or
when the ignition is switched on.
Creating a user profile
Multimedia sy stem:
,6\VWHP.g 3HUVRQDOL]DWLRQ.&UH
DWH 3URILOH
#En ter a name.
#Select a.
The user profile sa ves individual settings, e.g.:
RSy stem settings.
RSettings in theTV tuner's channel list.
RNa vigation and traf fic information.
The settings diff er depending on theve hicle
equipment. User profile options
Multimedia sy
stem:
,6\VWHP.g 3HUVRQDOL]DWLRQ
#Highlight a profile.
#¥Select an option.
The following options are available:
R5HQDPH
R'HOHWH
R5HVHW
% The guest profile cannot be dele ted or
re named.
Soft wareupdate
Information on software updates
The multimedia sy stem pr ovides a message
when an update is available.
Depending on the source, you can per form vari‐
ous updates:
24 2
Multimedia sy stem

Page 245 of 486

Software update
Source ofthe
update Up
date type
Interne tN avigation maps, sys‐
te m updates
External storage
medium, e.g. USB
st ick Na
vigation maps
Performing a software upda te
Re quirement:
An Internet connection is requ ired for updates
which are obtained online (
→page279).
Multimedia sy stem:
,6\VWHP.6RIWZDUH 8SGDWH
Au tomatically
#Ac tivate Othe automatic software update.
Up dates are per form ed.
The cur rent status of the updates is dis‐
pla yed.
The automatic software update is not availa‐
ble in all countries.
Manual
#Deactivate ªthe automatic software
update.
#Select an update from the list and start the
update.
Ac tivating the so ftwa reupdate
#Restart the sy stem.
Re set function
Multimedia sy stem:
,6\VWHP.5HVHW
The multimedia sy stem is reset tothefa ctory
settings.
Pe rsonal data is dele ted, forex ample:
RStation presets
RConnec ted mobile phones
#Select <HV.
A qu ery appears asking if you are sure that
yo uwa nttoreset.
1R selected: the process is canceled.
#Select <HV.
The multimedia sy stem is reset tofactory
settings and restar ted.
Na vigation
Switching navigation on
Multimedia sy stem:
,1DYLJDWLRQ
Multimedia sy stem 24
3

Page 246 of 486

#Alternatively:pres sth eß button.
The map appears and sho wscurrent vehicle
position 1.
% If a climate contro l setting ischanged, a cli‐
mate bar appears brief ly.
Showing/hiding the navigation menu
Re quirement:
The map displa ys the cur rent vehicle position.
#To sho w:Swipe le fton theto uchpad or
To uch Control.
or
#Slid eth e controller tothe left.#To hide: Swipe right on theto uchpad or
To uch Control.
or
#Slid eth e controller totheright.
Destination entry
Entering a POI or addre ss
Multimedia sy stem:
,1DYLJDWLRQ.¬ 'HVWLQDWLRQ
#Select (QWHU 'HVWLQDWLRQ .
The state or pr ovince in which theve hicle is
located is set 1.
There are two available me thods of destina‐
tion entry:
Rfree sear ch2
Rsear ch st ep-by-step 3
Me thod 1: free sear ch
#Enter a POI or address 2. The entries can
be made in any orde r.
During de stination ent ry, suggestions are
made bythe multimedia sy stem. A selection
of destinations appears in a list.
The following ent ries may be made, forex am‐
ple:
Rcit y,stre et, house number
Rstre et, city
RZIP code
RPOI name
RPOI categor y,e.g. *DV 6WDWLRQ
Rcity, POI name
#Toswitch tohandwriting recognition:
select 5.
#Write characters on theto uchpad.
24 4
Multimedia sy stem

Page 247 of 486

#Toswitch to character selection: pressthe
% button.
or
#Press theto uchpad.#To del ete an entr y:select 8(ifavailable).RPress brief ly: del etes the last character
entered or the last suggestion adop ted.
RPress and hold: dele testh e entire ent ry.
#To set the language: select4.
#Select a language.
% This function is useful for countries in which
se veralch aracter sets are support ed. An
ex ample is Russia, which uses Cyrillic and
Latin characters.
#To sear chonline: select6ª 21/,1( .
Once an Inte rnet connection is es tablished, a
list appears. It sho wsonline destinations
re lated tothe pr evious ent ry.
Online destinations are pr ovided bythe Inter‐
net service pr ovider.
#Select the destination. %
Online sear chis not available in all coun‐
tries.
Re quirement (USA): Mercedes-Benz
mbrace
®is activated.
#To call up the lis t:press the% button.
or
#If th eto p line of thech aracter bar is highligh‐
te d, navigate upwards.
#Select a destination in the list.
#To adopt a destination: select$GRSW 'HVWL
QDWLRQ7.
If th ere are se veral listings for a destination,
a list appears.
#Select the destination.
The destination address is shown.
Me thod 2: sear chstep- by-ste p
#Press the% button.
or
#If th eto p line of thech aracter bar is highligh‐
te d, navigate upwards.
The character bar is hidden. &LW\ RU =,3is
highlighted. Additional ent ryfields, forex am‐
ple, for32,, are available.
#Select &LW\ RU =,3 .
The character bar appears.
#En ter a city or ZIP code.
During destination entr y,suggestions are
made bythe multimedia sy stem. A selection
of destinations appears in a list.
The address may be entered in various
orders, e.g.:
R&LW\ RU =,3, 6WUHHW,+RXVH 1R
A stre et intersection may be entered, if
av ailable.
R6WUHHW ,&LW\ RU =,3
R32,, e.g. *DV 6WDWLRQ ,&LW\ RU =,3
% The functions descri bedforth e free sear ch
may be used:
Rswitch tohandwriting recognition
Rswitch tocharacter selection
Multimedia sy stem 24
5

Page 248 of 486

Rdeleteent ry
Entries in the32, field, forex ample, may
also be dele ted with £.
Rcall up online sear chfunction (if availa‐
ble)
Rcall up a list
#To change thest ate/pr ovince: select the
st ate or pr ovince.
#En ter a state or pr ovince. You only need to
enter thefirs tch aracter.
#Select a state or pr ovince in the list.
#To change the country :select the count ry.
#Enter a countr y.Yo u only needtoenter the
fi rs tch aracter.
#Select a country in the list.
#To adopt a destination: select$GRSW 'HVWL
QDWLRQ.
If th ere are se veral listings for a destination,
a dis tance-ori entated list appears.
#Selectthe destination.
The destination address is shown. Selecting a POI
Multimedia sy
stem:
,1DYLJDWLRQ.¬ 'HVWLQDWLRQ.32,V
#Select a categor y.
or
#Select $OO &DWHJRULHV.
#Select a categor y.
#Select a search position.
The special characters are displa yed in a list.
The list is sor tedby distance in ascending
orde r.
The POIs show thefo llowing information:
Rname of POI
Rlinear dis tance tothe POI
Rthe direction of the linear dis tance tothe
POI (ar row) is displa yed when sear ching
fo rth eve hicle&#39;s cur rent position
#Select a POI.
#Al tern ativel y,to filter the display byspe‐
cial characters: enter a searc h entry inthe
to p line.
The results list sho wsreleva nt POIs.
#Select ¡.
The firs t POI in the list is highlighted.
#Select a POI.
Setting the sear chposition for the parking
ca tegor y,forex ample, during active route
guidance
#Select ,Q WKH 9LFLQLW\ ,1HDU 'HVWLQDWLRQ or
$ORQJ WKH 5RXWH.
The list sho ws the located POIs or opens an
ove rview of thero ute.
#Select a POI.
Selecting pr evious destinations
Multimedia sy stem:
,1DYLJDWLRQ.¬ 'HVWLQDWLRQ.3UHYL
RXV 'HVWLQDWLRQV
#Select the destination.
The destination address is shown.
#Alternatively: if a favo rite has been sa ved
(→page 256), select )URP *OREDO )DYRULWHV .
#Select afavo rite .
The destination address is shown.
24 6
Multimedia sy stem

Page 249 of 486

Selecting a contact
Requirement:
a mobile phone is connec tedto the multimedia
sy stem (
→page 266).
Multimedia sy stem:
,1DYLJDWLRQ.¬ 'HVWLQDWLRQ.&RQ
WDFWV
#Select the conta ct.
The releva nt contact de tails are displa yed.
#Select an address.#Alternativel y,to filter the display bycon‐
tacts: enter names or initials into the sear ch
fi eld.
#Select ¡.
The firs t contact in the list is highlighted.
#Select the conta ct. En
terge o-coordina tes
Multimedia sy stem:
,1DYLJDWLRQ.¬ 'HVWLQDWLRQ.*HR
FRRUGLQDWHV
#En terge o-coordinates as latitude and longi‐
tude coordinates in degrees, minutes and
seconds.
The map sho ws there leva nt position.
#Confirm the ent ry.
#To view or mo vea destination on the
map: select 0DS.
#Tocalculate a route: select 6WDUW 5RXWH
*XLGDQFH.
#If a route has already been created, select
6WDUW 1HZ 5RXWH *XLGDQFH or6HW DV ,QWHU
PHGLDWH 'HVWLQDWLRQ. Selecting fr
omthe map
Multimedia sy stem:
,1DYLJDWLRQ.0DS 0HQX
#Alternatively: if the map is displa yed in full
screen mode, press theTo uch Control, con‐
troller or touchpad.
The map menu appears.
#Select &#34;mo vemap&#34; in map menu
3(→page 259).
#Swipe in any direction on theTo uch Control
or touchpad.
or
#Slide the controller in any direction.
The map mo ves in the cor responding direc‐
tion under the crosshair. The more you mo ve
yo ur finger away from the middle on the
to uchpad, thefast erthe map mo ves.
#Press theTo uch Control, the controller or the
to uchpad.
If se veral destinations are located around the
crosshair, a li stsho wstheav ailable POIs and
ro ads.
Multimedia sy stem 24
7

Page 250 of 486

If a destination is locatedexact ly on the
crosshair, the destination address is dis‐
pla yed.
#Select a destination in the list.
The destination address is shown.
Showing traf fic messages for the vicinity of
the map
#Select 7UDIILF 0HVVDJHV IRU WKH 9LFLQLW\ .
The map appears.
#Swipe le ftor right on theto uchpad.
or
#Slid eth e controller tothe left or right.
The pr evious or next traf fic incident is high‐
lighted on the map. Information on the tra ffic
incident is displa yed.
Showing POIs in the vicinity of the map
#Select 32,V LQ WKH 9LFLQLW\ .#Swipe left orright on theto uchpad.
or
#Slid eth e controller tothe left or right.
The pr evious or next POI is highlighte d onthe
map. The name or addre ss is displayed.
#Alternativel y,to filter the display byPOI
categor y:swipe down on theto uchpad.
or
#Slid eth e controller down.
#Select a POI categor y.
#8VHU 'HILQHGallowspersonal POI symbols to
be selected (→page 260).
Entering an intermedia tedestination
Prerequisite
A destination is entered.
Multimedia sy stem:
,1DYLJDWLRQ.¬ 'HVWLQDWLRQ.,QWHU
PHGLDWH GHVWLQDWLRQV
#Select 6HDUFK IRU DQ ,QWHUPHGLDWH 'HVWLQD
WLRQ .
#Enter an intermediate destination.
The sear chresults are displa yed.
#Select an intermediate destination.
The address of the intermediate destination
appears.
#Select 6HW DV 'HVWLQDWLRQ.
The intermediate destination is set.
#Alternatively: select an intermediate destina‐
tion via ¬'HVWLQDWLRQ duringroute guid‐
ance.
#Select (QWHU 'HVWLQDWLRQ .
#Select6HW DV 1H[W ,QWHUPHGLDWH 'HVWLQDWLRQ
af te r entering the destination.
Calculating a route with intermediate desti‐
nations
Re quirement:
En terth e destination and at least one intermedi‐
ate destination.
Multimedia sy stem:
,1DYLJDWLRQ.¬ 'HVWLQDWLRQ.,QWHU
PHGLDWH GHVWLQDWLRQV
#Select 6WDUW 1HZ 5RXWH *XLGDQFH .
The route iscalculated with the set inter‐
mediate destinations.
Editing intermedia tedestinations
Prerequisite
A destination is entered.
24 8
Multimedia sy stem

Page:   < prev 1-10 ... 201-210 211-220 221-230 231-240 241-250 251-260 261-270 271-280 281-290 ... 490 next >