display MERCEDES-BENZ E-CLASS SALOON 2021 Owners Manual

#
T
To switc
o switc h
ho.:
o.: take a hand back away from the
front passenger seat.
The search light is switched o. again. Inf
Inf
or
ormation on
mation on pr
pro/les,
o/les, t
themes, sugg
hemes, sugg es
estions andtions and
fav
fav our
our it
ites
es Fo
r electrically adjustable seats obser vethefo l-
lowing no tes. &
W
WARNING
ARNING Risk of becoming trapped dur-
ing adjustment of the driver's seat aTer
calling up a driver pro/le
Selecting a user pro/le may trigger an adjust-
ment of the driver's seat tothe position sa ved
under the user pro/le. You or other vehicle
occupants could be injured in the process. #
Make sure that when the position of the
driver's seat is being adjus ted via the
multimedia system, no people or body
parts are in the seat's range of mo ve-
ment. If
th ere is a risk of someone becoming trap-
ped, stop the adjustment process immedi-
atel y: #
a)Tapth ewa rning message onthe
media displa y.
or #
b) Press a memory function position but-
ton or a seat adjustment switch on the
driver's door.
The adjustment process will be stopped. The driver's seat is equipped with an access pre-
ve
nter.
If th e driver's door is open, the driver's seat will
not not be set aTer calling up the driver's pro/le.
Pro/les store your vehicle settings and settings
fo rth e multimedia system. If theve hicle is used
by several drivers, the driver can select their own
pro/le without changing the stored pro/le settings
of other drivers.
% Information on pro/les from Mercedes me
connect can be found in the Digital Opera-
to r's Manual. Ve
hicle settings are, forex ample, driver's seat,
steering wheel and mir ror settings, climate control
and ambient lighting. Forth e settings of the multi-
media system, you can select, forex ample, radio
stations, pr evious destinations as well as themes,
suggestions and favo urites.
Fo rre cur ring driving situations, such as long
drives on the mo torw ay,yo u can sa veyour prefer-
re d settings in a theme in theve hicle. In a theme
yo u can sa vethe display of the digital map, your
prefer redra dio station and prefer red drive pro-
gr am, forex ample.
The vehicle can learn the habits of the driver. It
th en o.ers suggestions forth e most probable
navigation destinations, media sources, radio sta-
tions or contacts. The pre-requirements forth at
are the selection of a pro/le, your consent tothe
re cording of data and su1cient collected data.
Fa vourites pr ovide quick access toapplications
th at are used oTen. You can select favo urites
from categories or add them directly toan appli-
cation. 320
320
MBUX multimedia system

Con/gur
Con/gur
ing
ingpr
pro/les,
o/les, t
themes and sugg
hemes and sugg es
estionstions Multimedia system:
4 © 5
f Profiles
Cr
Cr eating a ne
eating a ne w
wpr
pro/le
o/le #
Select 0081Create profile . #
Select an avatar. #
Enter the name and con/ rmwith 0076. #
Select Continue 0048. #
Select Current settings . #
Select Save. #
Activate Blue tooth ®
and select Connect
phone, toconnect a mobile phone with the
user pro/le . #
Select Finished.
Selecting
Selecting pr
pro/le
o/le op
options
tions #
Select 0062for a pro/le.
The following functions are available:
R Editing, resetting or deleting a pro/le
R Resetting themes or favo urites R
Con/guring suggestions
Con/gur
Con/gur ing
ingsugg
sugg es
estionstions #
Select 0062for a pro/le. #
Select Suggestions settings. #
Switch Allow destination suggestions, Allow
music suggestions andAllow contact sugges-
tions on or o.. #
T
To deactiv
o deactiv at
ate t
e t he lear
he lear ning function f
ning function f or one
or one
day
day :
:activate Deact. learn. for 24h .
Fo r 24 hours no new actions will be trained
and no data recorded forth e active pro/le.
Suggestions will continue tobe shown.
Example: if the option is switched on and a
ro ute toa new destination has been calcula-
te d, this destination would not be take n into
account forth e learning function.
Cr
Cr eating ne
eating ne w t
w themes
hemes #
Select ©. #
Select THEMES. #
Select 0081Set theme .
The settings which are sa ved in theth eme are
shown. #
Select Continue 0048. #
Select AudioandNavigation (Navigation) and
store the active settings in theth eme. #
Select Continue 0048. #
Select an entry screen. #
Select Continue 0048. #
Select an image. #
Enter the names into the entry /eld and con-
/rm with 0076. #
Select Save. Syst Syst
em se
em se ttings
ttings Ov Ov
er
er vie
vie w of t
w of t he sy
he syst
stem se
em se ttings menu
ttings menu In
the system settings menu, you can make set-
tings in thefo llowing menus and control ele-
ments:
R Display
- Styles MBUX multimedia system
321
321

#
Select Connect using WPS PIN input .
The multimedia system generates an eight-
digit PIN. #
Enter this PIN on the device tobe connected. #
Con/rm the entr y.
Connecting using a butt
Connecting using a butt on
on#
Select the options 0048ofthe desired Wi-Fi
networ k. #
Select Connect via WPS PBC. #
Select "Connect via WPS PBC" in the options
on the device tobe connected (see the manu-
fa cturer's operating instructions). #
Press the WPS button on the device tobe con-
nected. #
Select Continue inthe multimedia system.
A
A ctiv
ctiv ating aut
ating aut omatic connection
omatic connection #
Select Connect via Wi-Fi. #
Select the options 0048ofthe desired Wi-Fi
networ k. #
Activate Permanent Internet connection .Connecting wit Connecting wit
h a kno h a known W
wn Wi-Fi
i-Fi #
Select Connect via Wi-Fi. #
Select a Wi-Fi networ k.
The connection is established again.
Con/gur
Con/gur ing
ing t
the multimedia syst
he multimedia syst em as a W
em as a Wi-F
i-Fi ho
i ho t-
t-
spo
spo t f
t for e
or e xt
xter
er nal de
nal de vices
vices
The type of connection established depends on
th e device tobe connected. The function must be
suppor tedby the multimedia system and bythe
device tobe connected. The type of connection
established must be selected on the multimedia
system and on the device tobe connected. #
Select Vehicle hotspot. #
Select Connect device to vehicle hotspot .
Connecting using WPS PIN g Connecting using WPS PIN g ener eneration
ation #
Select Connect using WPS PIN generation. #
Enter the PIN shown in the media display on
th e device tobe connected and con/ rm.
Connecting using WPS PIN entry
Connecting using WPS PIN entry #
Select Connect using WPS PIN input. #
Enter the PIN that is shown on theex tern al
device's displ ayon the multimedia system.
Connecting using a butt
Connecting using a butt on
on #
Select Connect via WPS PBC. #
Press the push button on the device tobe
connected (see the manufacturer's operating
inst ructions). #
Select Continue .
Connecting using a secur
Connecting using a secur itykey
ity key #
Select Connect device to vehicle hotspot.
A secu rity key is displa yed. #
Select theve hicle from the device tobe con-
nected. The vehicle is displ ayed with the
DIRECT-MBUX XXXXX network name. #
Enter the security key which is shown in the
media display on the device tobe connected. #
Con/rm the entr y.
Connecting using NFC
Connecting using NFC #
Select Connect via NFC. #
Activate NFC on the mobile device (see the
manufacturer's operating instructions). 324
324
MBUX multimedia system

Plug-in h
Plug-in h
ybr
ybrid se
id se ttings
ttings Con/gur
Con/gur
ing
ingse
settings f
ttings f or plug-in h
or plug-in h ybr
ybrid v
id v ehicles
ehicles Multimedia system:
4 © 5
EQ
Se
Se tting t
tting t he c
he char
har ging pr
ging pr ocess
ocess #
Select Departure time.
The following charging times can be selected:
R Once
R Week profile #
Select a setting.
Se
Se tting a single depar
tting a single depar tur
ture time
e time #
Select Departure time .#
Select Edit single time .#
Set a departure time.
Se
Se tting t
tting t he w
he week
eekpr
pro/le
o/le #
Select Departure time .#
Select Edit week profile. #
Add new time #
Set the desired departure times, e.g. every
day at 8 a.m. #
Select 0076.
Se
Se tting t
tting t he maximum c
he maximum c har
harging curr
ging curr ent
ent #
Select Maximum charge current. #
Select Maximum, 8 ampsor6 amps.
When the battery is charge d, thech arging cur-
re nt is limi tedto the selected amperage.
% For saf etyre asons, only use thech arging
cable supplied with theve hicle or an original
Mercedes-Benz charging cable. Mercedes-
Benz thoroughly tests these original charging
cables forth eir suitability forth e high-voltage
ch arging of your vehicle. Pur chase these parts
from your Mercedes-Benz Service Centre and
obtain advice there.
A
A ctiv
ctiv ating or deactiv
ating or deactiv ating r
ating rout
oute-based oper
e-based oper ating
ating
mode s
mode str trat
at egy
egy #
Select Electric in city .
Depending on the pr evious status, the func-
tion is activated or deactivated. Calling up t
Calling up t
he ener
he energy
gy0ow
0ow display
display Multimedia system:
4 © 5
EQ #
Select Energy flow.
The visualisation of the energy 0ow in theve hi-
cle is displ ayed.
In addition tothe energy 0o w,information on the
status of thehy brid system and the cur rent state
of charge ofthe high-voltage battery is also dis-
pla yed. 326
326
MBUX multimedia system

F
F
unctions of t
unctions of t he ener
he energy
gy0ow
0ow display
display 1
State of charge ofthe high-voltage battery
2 Combustion engine
3 Energy 0ow
4 High-voltage battery
5 Status of thero ute-based operating-mode
strategy (/ page 182)
The active components of thehy brid system are
highlighted in the energy 0ow displa y.The energy
0ow between the individual components is shown
in colour. The energy 0ow is shown in di.erent colours
depending on the operating status:
R Whit
Whit e:
e:constant energy 0ow
R R
Red:
ed: high energy 0ow (boost e.ect)
R Gr
Green:
een: low- emission energy 0ow in the case of
re cuperation, elect ric mode and when charg-
ing the high-voltage battery N
N
a
avig
vig ation
ation N
No
ot
tes on na
es on na vig
vigation
ation R
R
out
out e guidance wit
e guidance wit h augment
h augmented r
ed reality
eality &
W
WARNING
ARNING Risk of accident and injury as a
re sult of distraction, inco rrect depiction or
wrong interpr etation of the display
The camera image of the augmented reality
displ ayis not suitable as a guide for driving. #
Alwayske ep an eye on the actual tra1c
situation. #
Avoid extended obser vation of the cam-
era image. &
W
WARNING
ARNING Risk of accident and injury due
to imprecise positioning of additional
information
The additional information from the augmen-
te dre ality displ aymay be inaccurate and is
not a substitute for observing and assessing
th e actual driving situation. #
Alwayske ep an eye on the actual tra1c
situation when car rying out all driving
manoeuvres. Switc
Switc
hing na
hing na vig
vig ation on
ation on Multimedia system:
4 © 5
Navigation (Navigation) #
Alternativel y:press thez button.
The map displa ys the cur rent vehicle position.
The navigation menu is shown.
The navigation menu is hidden if route guid-
ance is active. #
T To show
o show :
:ta p on theto uchscreen.
The menu is hidden automaticall y. MBUX multimedia system
327
327

The
following entries can be made, forex ample:
R Town, st reet, house number
R Street,to wn
R Postcode
R POI name or POI ca tegor y,e.g. Parking
R Contact name #
Select a sear chresult in list 3. #
Calculate thero ute (/ page 330).
% You can /nd fur ther information about desti-
nation entr y,e.g. 3 wordaddresses, in the
Digital Owner's Manual.
Changing country
Changing country #
Select the country indicator in 1.#
Enter the country indicator. #
Select the country in 3.
Using online sear ch
Using online sear ch
% Requirements: the media display sho wsan
Internet connection with a double-ar row sym-
bol in the status line. Destination entry uses online map services. If
the
on-board sear ch/nds no sui table destinations or
if yo uch ange countries, the online sear chisavail-
able.
Fo rth e destination you can enter an address, a
POI or a thre e-word address. #
Enter the destination in input line 2.
The sear chresults are displa yed. #
Select the destination in the list.
The de tailed view forth ero ute is displa yed.
or #
Select country indicator 1. #
Select the pr ovider forth e online service from
th e countries list. #
Enter the destination in input line 2. #
Select the destination in the list. Calculating a r Calculating a r
out
oute and using se
e and using se ttings f
ttings for r
or route
oute
guidance
guidance R
R
eq
eq uir
uir ements:
ements:
R The destination has been entered.
R The destination address is shown. Multimedia system:
4 © 5
Navigation 1
¥ Noroute yet.
¦ Aro ute has been mapped. #
Select ¥.
The route tothe destination is calculated.
Ro ute guidance begins.
or #
Select ¦. #
Select Set as intermediate dest..
The destination address is set as the next
intermediate destination. 330
330
MBUX multimedia system

#
Switch Motorway information on or o..Using ser
Using ser
vices
vices R
R
eq
eq uir
uir ements:
ements:
R Thereis an Internet connection.
R Mercedes me connect is available.
R You ha veset up a user account in the
Mercedes me Portal.
R The vehicle is connected toa user account
and you ha veaccep tedth e conditions of use
fo rth e service.
Fu rther information can be found at: https://
www.mercedes.me
R The service is available and has been activa-
te d.
R The following additional conditions apply to
th ePa rking service:
- The navigation services option is available,
subscribed toand activated in the
Mercedes me Portal.
- The parking service is within the scope of
th e navigation service. Multimedia system:
4 © 5
Navigation
Displa
Displa ying t
ying the
hetr
tra1c
a1c situation wit
situation wit h Liv
h Live
eTr
Tra1c
a1c
Inf
Inf or
ormation
mation #
Select Z. #
Activate Traffic . #
Select Advanced. #
Select View. #
Select Map elements . #
Switch on Traffic incidents, Free-flowing traf-
fic and Delay.
If tra1c information has been received, then
tra1c incidents such as roadwor ks,ro ad
bloc ks, local area reports (e.g. fog) and warn-
ing message s are displayed.
The tra1c delay is displa yedfo rth e cur rent
ro ute. Tra1c dela yslasting one minute or lon-
ge r are take n into consideration.
Displa
Displa ying hazar
ying hazar d w
d war
arnings wit
nings wit h Car
h Car-t
-to-X
o-X -Commu-
-Commu-
nication
nication
If hazard warnings are available these can be
shown as symbols on the map. The display depends on
the settings forth eTraffic andTraf-
fic incidents options. #
Set the options.
If Traffic is switched o. and Traffic incidents
is switched on, the symbols are shown on the
prospective route.
Displa Displa ying w
ying w eat
eather inf
her inf or
ormation and ot
mation and other map
her map
cont
cont ents
ents #
Select Z. #
Select Advanced. #
Select View. #
Select Map elements. #
Scroll up and show theONLINE MAP CON-
TENTS categor y. #
Switch on a se rvice, e.g. Weather.
Cur rent we ather information is displ ayed on
th e navigation map, e.g. temp erature or cloud
co ver. 332
332
MBUX multimedia system

Then,
you can select a service and be connected
to a specialist at the Mercedes-Benz Customer
Centre.
Calling t
Calling t he Mer he Mercedes-Benz Cust
cedes-Benz Cust omer Centr
omer Centre
eaTer
aTer
aut
aut omatic accident or br
omatic accident or br eakdo
eakdown det
wn det ection
ection
R
R eq
eq uir
uir ements:
ements:
R The vehicle has de tected an accident or break-
down situation.
R The vehicle is stationar y.
R The hazard warning lights are switched on.
% This function is not available in all countries.
The vehicle can de tect accident or breakdown sit-
uations under cer tain circumstances.
In theev ent an accident or breakdown is de tec-
te d, the emer gency guide sh ows saf ety no tes in
th e multimedia system displa y.
ATer quitting the emer gency guide display on the
multimedia system, a prom ptappears asking
whe ther youwo uld like toget support from the
Mercedes-Benz Customer Centre. #
Select Call.
R ATer your ag reement, or if the Mercedes
me connect service "Accident and Break-
down Management" is active, theve hicle
data is transfer red automatically
(/ page 343).
R The Mercedes-Benz Customer Centre
ta ke syo ur call and or ganises the break-
down and accident assistance.
Yo u may be charge dfo rth ese services.
% Depending on the se verity of the accident, an
automatic emer gency call can be initia ted.
This has priority over all other active calls.
% In addition, if the Mercedes me connect
service "Telediagnostics" is active, a similar
prom ptcan appear aTer a delay in theev ent
of a breakdown. If you are already in contact
with the Mercedes-Benz Customer Centre or
ha ve already received support, this prom pt
can be ignored or declined.
% Ifyo u answer the prom ptfor support from the
Mercedes-Benz Customer Centre with Later,
th e message will be hidden and appear again
later. The prom
pttriggered bythe Mercedes me
connect service "Telediagnostics", can either
be con/ rmed or declined. ATer being
declined, this will not be shown again.
Arr Arr anging a ser
anging a ser vice appointment via a Mer
vice appointment via a Mer cedes
cedes
me call
me call
If yo u ha veactivated the maintenance manage-
ment service, releva nt vehicle data is transfer red
automatically tothe Mercedes-Benz Customer
Centre. You will then receive individual recom-
mendations rega rding the maintenance of your
ve hicle.
Re gardless of whe ther you ha veconsen tedto the
maintenance management service, the multime-
dia system reminds you aTer a cer tain amount of
time that a service is due. A prom ptappears ask-
ing if youwo uld like tomake an appointment. #
T To arr
o arr ang
ange a ser
e a ser vice appointment
vice appointment: :select Call.
ATer your ag reement, theve hicle data is
transfer red and the Mercedes-Benz customer
centre take syo ur prefer red appointment date.
The information is then sent toyour desired
service outlet. 340
340
MBUX multimedia system

If a call is made aTer automatic accident or break-
down de
tection using the multimedia system, the
fo llowing data is also transmitted:
R Current mileage and maintenance data
R Current vehicle location
If Ac cident and Breakdown Management is called
via thevo ice control system and no service has
been activated, but the data pr otection query has
been con/ rmed, thefo llowing data can also be
called up from theve hicle bythe Mercedes-Benz
Customer Centre:
R Current vehicle location
If th e data pr otection prom pthas been rejec ted,
th efo llowing data is transmitted toenable targe-
te d advice and an e1cient service:
R Reason forth e initiation of the call
R Rejection of the data pr otection prompt
R Country indicator of theve hicle
R Set language forth e multimedia system
R Telephone number of the communication plat-
fo rm installed in theve hicle Dat
Dat a tr a transf
ansf er if Mer
er if Mer cedes me connect ser
cedes me connect ser vices
vices
ar
ar e activ
e activ at
ated
ed
Only if there specti veservice is activated will
additional incident-speci/c data be transmit ted in
th e second stage toenable an optimal service.
An ove rview of the data transmitted can be found
in there specti veterm s of use for Mercedes me
connect services. These can be obtained in the
Mercedes me por tal: https://
me.secure.mercedes-benz.com
Dat Dat a pr
a pr ocessing
ocessing
The data transmitted within the scope of the call
is dele ted from the processing system aTer the
call is /nished, in so far as this data is not being
used forot her activated Mercedes me connect
services.
The incident-speci/c data is processed and stored
in the Mercedes-Benz Customer Centre and, if
re qu ired toprocess the incident, forw arded tothe
service partner authorised bythe Mercedes-Benz
Customer Centre. Please take note of the data
pr otection information on the Mercedes me Inter-
net page https://www.mercedes.me or in there
corded message immediately aTer calling the
Mercedes-Benz Customer Centre.
% The recorded message is not available in
ev ery countr y. Mer Mer
cedes me connect
cedes me connect Inf
Inf
or
ormation on Mer
mation on Mer cedes me connect
cedes me connect
% Mercedes me connect or individual Mercedes
me connect services are not available in every
countr y.Find out at a Mercedes-Benz service
centre if these functions are available in your
countr y.
Mercedes me connect consists of multiple ser v-
ices.
Yo u can use thefo llowing services via the multi-
media system and theove rhead control panel, for
ex ample:
R Accident and Breakdown Management (me
button or situation-dependent display in the
multimedia system)
R Mercedes-Benz emer gency call system (auto-
matic eme rgency call and SOS button) 342 342
MBUX multimedia system

More information about Mercedes me connect
services can be obtained in the Mercedes me Por-
ta l: https://me.secure.mercedes-benz.com
Dat
Dat a tr
a transf
ansf err
erred dur
ed dur ing Mer
ing Mer cedes me connect
cedes me connect
call ser
call ser vices
vices
The data transfer red during a Mercedes me con-
nect call depends on:
R The reason for initiation of the call
R The service that is selected in thevo ice con-
trol system
R The activated Mercedes me connect services
Yo u can /nd out which data is transfer red when
using the services in the cur rently valid Mercedes
me connect term s of use and the data pr otection
information for Mercedes me connect. You can
/nd these in your Mercedes me user account. Ov
Ov
er
ervie
vie w of t
w of t he Mer
he Mer cedes me & Apps menu
cedes me & Apps menu When
you log in with a user account tothe
Mercedes me Portal, then services and o.ers
from Mercedes-Benz will be available toyou. Fo
r more information consult a Mercedes-Benz
service centre or visit the Mercedes me por tal:
https://me.secure.mercedes-benz.com
% Make sure you alw ayske ep the Mercedes me
apps updated.
Yo u can call up the menu using Mercedes me &
Apps inthe multimedia system.
In theMercedes me & Apps menu,thefo llowing
options can be available:
R Connecting theve hicle with theMercedes me
user account
R Deleting a connection between a Mercedes
me user account and theve hicle
R Calling up the Mercedes me services
R Calling up apps such as, In-Car O1ce or the
we b br owser depending on availability Ov
Ov
er
ervie
vie w of In-Car
w of In-Car O1ce
O1ce Using In-Car O1ce,
you can connect your online
services with the multimedia system. Re
quirements for In-Car O1ce:
R Your mobile phone is connected with the mul-
timedia system (/ page 338).
R You ha vea user account forth e Mercedes me
Po rtal.
R The In-Car O1ce service is activated in the
Mercedes me Portal.
R You ha vea user account with an online
service, e.g. with O1ce 365 or Gmail, and
ha ve connected the user account with In-Car
O1ce.
In-Car O1ce functions R Display pending appointments in the calendar
- Reading out calendar ent ries
- Calling stored telephone numbers
- Navigating toappointments with navigable
destinations
- Deleting a calendar ent ry
R Display and selection of tasks and calls to
comple te
- Reading aloud 344
344
MBUX multimedia system