MERCEDES-BENZ E-CLASS SALOON 2021 Owners Manual
Page 461 of 557
Engine
Engine
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
To switch off the engine,
press the Start/Stop but-
ton for at least 3 seconds
or 3 times. *Y
ou ha vepressed the start/s top button while theve hicle is in motion. #
Information about switching o. theve hicle while driving (/ page 168).
Cannot start engine See
Owner's Manual *T
hevehicle cann otbe star ted. #
Switch theve hicle o. and switch it back on #
Ifth e display message still appears, consult a quali/ed specialist workshop.
00BD
Top up coolant See Own-
er’s Manual *T
he coolant le vel is too lo w.
* N NO
OTE
TE Engine damage due toinsu1cient coolant #
Avoid long journe yswith insu1cient coolant. #
Add coolant (/ page 365). #
Have the engine cooling system checked at a quali/ed specialist workshop. 458
458
Displ
aymessages and warning/indicator lamps
Page 462 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
ÿ
Coolant Stop vehicle
Switch engine off *T
he coolant is too hot. #
Stop immediately in accordance with the tra1c conditions and switch o. theve hicle. &
W WARNING
ARNING Risk of burns when opening the bonnet
If yo u open the bonnet in theev ent of an overheated engine or /re in the engine compartment, thefo llowing situa-
tions may occur:
R You may come into contact with hot gases.
R You may come into contact with other escaping hot operating 0uids. #
Before opening the bonnet, allow the engine tocool down. #
Intheev ent of a /re in the engine compartment, keep the bonnet closed and call the /re service. #
Wait until the engine has cooled down. #
Make sure that the air supply tothera diator is not obstructed. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C.
ÿ *T
here is a malfunction in the engine cooling system. #
Avoiding high loads on the engine, drive tothe nearest quali/ed specialist workshop. In doing so, ensu rethat the
coolant temp erature display remains below 120°C. Display messages and
warning/indicator lamps
459
459
Page 463 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
00B6
Reserve fuel level *T
he fuel supply has dropped into there ser verange. #
Refuel.
003A Clean the fuel filter *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the fuel /lter is dirty or thewa ter in the fuel /lter needs tobe drained. #
Consult a quali/ed specialist workshop.
009E
Replace air cleaner *V
Vehicles wit
ehicles wit h diesel engines:
h diesel engines: the engine air /lter is dirty and must be replaced. #
Consult a quali/ed specialist workshop. T
T
r
ransmission
ansmission Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences and0050
0050Solutions
Solutions
Only select Park (P) when
vehicle is stationary *I
t is possible toselect the park position 005Donly if theve hicle is stationar y. #
Depress the brake pedal tostop. 460 460
Displa
y messages and warning/indicator lamps
Page 464 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions #
ShiT the transmission topark position 005Dwhen theve hicle is stationar y.
Apply brake to deselect
Park (P) position *Y
ou ha veattem pted toshiT the transmission out of park position 005Dand into ano ther transmission position. #
Depress the brake pedal. #
Select transmission position 005B,005Eor neutral 005C.
To shift out of P or N,
depress brake and start
engine *Y
ou ha veattem pted toshiT the transmission out of park position 005Dor neutral 005Cand into ano ther transmission posi-
tion. #
Depress the brake pedal. #
Start theve hicle. #
Change the transmission position.
Apply brake to select D or R *You ha veattem pted toselect transmission position 005Bor005E. #
Depress the brake pedal. #
Select transmission position 005Bor005E.
Apply brake to select R *You ha veattem pted toselect transmission position 005E. #
Depress the brake pedal. #
Select transmission position 005E.
Risk of vehicle rolling
Driver door open and trans-
mission not in P *T
he driver's door is not fully closed and transmission position 005B,005Eor neutral 005Cis selected.
The vehicle may rollawa y. Display messages and
warning/indicator lamps
461
461
Page 465 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions #
Select park position 005Dwhen switching o. theve hicle.
N permanently active Risk
of vehicle rolling *N
eutral 005Chas been selected while theve hicle is rolling or while you are driving. #
Depress the brake pedal tostop. #
ShiT the transmission topark position 005Dwhile theve hicle is stationar y. #
Tocontinue driving, select transmission position 005Bor005E.
Without changing gear,
consult workshop *T
he transmission is malfunctioning. It is no lon ger possible tochange the transmission position. #
If transmission position 005Bis selected, consult a quali/ed specialist workshop and do not change the transmission
position. #
For all other transmission positions, park theve hicle safel y. #
Consult a quali/ed specialist workshop.
Reversing not poss. Con-
sult workshop *T
he transmission is malfunctioning. It is not possible toselect transmission position 005E. #
Consult a quali/ed specialist workshop.
Transmission Malfunction
Stop *T
he transmission is malfunctioning. The transmission shiTs toneutral 005Cautomaticall y. #
Stop theve hicle immediately in accordance with the tra1c conditions. #
Depress the brake pedal. #
Engage park position 005D. #
Consult a quali/ed specialist workshop. 462 462
Displ
aymessages and warning/indicator lamps
Page 466 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
Stop vehicle Leave engine
running Wait Transmission
cooling *T
he transmission is overheating. Pulling away may be temp orarily impaired or not possible. #
Stop theve hicle immediately in accordance with the tra1c conditions. Do not continue driving. #
Leavethe engine running. #
Wait until the display message disappears before pulling away.
Auxiliary battery malfunc-
tion (white displ aymessage) *V
Vehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: The auxiliary battery forth e transmission is no longer being charge d. #
Consult a quali/ed specialist workshop. #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: untilthen, alw ays select park position 005Dbefore you switch o. theve hicle. #
Before leaving theve hicle, apply the electric parking brake.
Auxiliary battery malfunc-
tion (red display message) *V
Vehicles wit ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: The auxiliary battery forth e transmission is no longer being charge d. #
Consult a quali/ed specialist workshop. #
V
Vehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission:
ansmission: untilthen, alw ays select park position 005Dbefore you switch o. theve hicle. #
Before leaving theve hicle, apply the electric parking brake. Display messages and
warning/indicator lamps
463
463
Page 467 of 557
Br
Br
ak
ak es
es Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/conseq uences and
uences and0050
0050Solutions
Solutions
0024
Parking brake See Owner's
Manual *T
heyellow 0024 indicator lamp is lit. The electric parking brake is malfunctioning.
T
T o apply o apply :
: #
Switch theve hicle o. and switch it back on #
App lythe electric parking brake manually (/ page 214).
If it is not possible toapply the electric parking brake: #
Consult a quali/ed specialist workshop. #
Where necessar y,also secure the par kedve hicle against rolling away.
*T heyellow 0024 indicator lamp and there d0024 indicator lamp are lit. The electric parking brake is malfunctioning.
T
T o r
o r elease:
elease: #
Switch theve hicle o. and switch it back on #
Release the electric parking brake manually (/ page 214).
or #
Release the electric parking brake automatically (/ page 213).
If it is still not possible torelease the electric parking brake: #
Do not continue driving. Consult a quali/ed specialist workshop.
*T heyellow 0024 indicator lamp is lit and there d0024 indicator lamp is 0ashing. The electric parking brake is malfunc-
tioning. 464
464
Display messages and
warning/indicator lamps
Page 468 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
The electric parking brake could not be applied or released. #
Switch theve hicle o. and switch it back on
T
T o apply
o apply :
: #
Release and then apply the electric parking brake manually (/ page 214).
T T o r o r elease:
elease: #
Apply and then release the electric parking brake manuall y.
If it is not possible toapply the electric parking brake or there d0024 indicator lamp continues to0ash: #
Do not continue driving. Consult a quali/ed specialist workshop. #
Where necessar y,also secure the par kedve hicle against rolling away.
*T heyellow 0024 indicator lamp is lit and there d0024 indicator lamp 0ashes for appr oximately ten seconds aTer the
electric parking brake has been applied or released. It then remains lit or goes out. The electric parking brake is mal-
functioning.
If t
If t he st he st at
ate of c
e of c harg
harge is t
e is t oo low
oo low :
: #
Char gethe 12 V batter y.
T
T o apply
o apply :
: #
Switch o. theve hicle.
The elect ric parking brake will be applied automatical ly. Display messages and
warning/indicator lamps
465
465
Page 469 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions
If yo u do not wantthe electric parking brake tobe applied, e.g. at an automatic car wash or when theve hicle is being
to we d, lea vetheve hicle switched on. This does not include having theve hicle towe d with there ar axle raised.
If th e electric parking brake is not applied automaticall y: #
Switch theve hicle o. and switch it back on #
Release and then apply the electric parking brake manually (/ page 214).
If it is still not possible toapply the electric parking brake: #
Consult a quali/ed specialist workshop. #
Where necessar y,also secure the par kedve hicle against rolling away.
T
T o r
o r elease:
elease: #
Ifth e conditions for automatic release are ful/lled and the electric parking brake is not released automaticall y,
re lease the electric parking brake manually (/ page 214).
If it is still not possible torelease the electric parking brake: #
Do not continue driving. Consult a quali/ed specialist workshop.
0024
Release parking brake *T
hered0024 indicator lamp is 0ashing.
The electric parking brake is applied while you are driving:
R A condition for automatic release of the electric parking brake has not been ful/lled (/ page 213).
R You are per form ing emer gency braking using the electric parking brake (/ page 214).466
466
Display messages and
warning/indicator lamps
Page 470 of 557
Displa
Displa
y messag
y messag es P
es Possible causes/conseq
ossible causes/consequences and uences and0050
0050Solutions
Solutions #
Check the conditions for automatic release of the electric parking brake. #
Release the electric parking brake manuall y.
0024
Turn on the ignition to
release the parking brake *T
hered0024 indicator lamp is lit.
Yo u ha veattem pted torelease the electric parking brake with theve hicle switched o.. #
Switch on theve hicle.
004D Check brake fluid level *T
here is insu1cient brake 0uid in the brake 0uid reser voir. &
W WARNING
ARNING Risk of an accident due tolow brake 0uid le vel
If th e brake 0uid le vel is too lo w,the braking e.ect and the braking characteristics may be impaired. #
Stop theve hicle as soon as possible, paying attention toroad and tra1c conditions. Do not continue driving. #
Consult a quali/ed specialist workshop. #
Do not top up the brake 0uid. Check brake pads See
Owner's Manual
*T
he brakepads ha vereached thewe ar limit. #
Consult a quali/ed specialist workshop. Displ
aymessages and warning/indicator lamps
467 467