MERCEDES-BENZ EQE 2023 Owners Manual

qAutomatic braking function of Active Parking
Assist
Persons or objects detected in the maneuvering range could cause the vehicle to brake sharply and interrupt the parking or exiting procedure.The vehicle will then be held at a standstill. If you
depress the accelerator pedal, the parking or exit-
ing procedure is resumed.
Check the area around your vehicle again before
resuming the parking or exiting procedure. Make
sure that persons, animals or objects are no lon-
ger in the maneuvering range. Also observe the system limitations of Active Parking Assist.
Remote Parking Assist

q Function of Remote Parking Assist
\bRemote Parking Assist is an additional func-
tion of Active Parking Assist. Comply withlocal traPc laws and regulations when using
Remote Parking Assist on public roads. If it is a requirement that you turn the wheelstoward the curb, you must not use Remote
Parking Assist.Please note that you may only use Remote
Parking Assist if you have a valid driving
license and are in a Nt state to drive.
Remote Parking Assist parks your vehicle or exits
the parking space while you are outside of yourvehicle. You can monitor the maneuvering andparking procedure on your mobile phone.
With Remote Parking Assist, you can carry out all
the parking procedures of Active Parking Assist.
You can also position the vehicle directly in front
of a garage or a driveway entrance and then use Remote Parking Assist to enter or exit a parking
space.
Remote Parking Assist manages pulling away, braking and steering. While Remote Parking Assist
is active, the vehicle is locked.
Remote Parking Assist is only an aid. It is not a
substitute for your attention to the surroundings. The responsibility for safe maneuvering and park-
ing always rests with you. Interrupt or terminate the parking procedure if necessary. Make sure
that no persons, animals or objects etc. are in the
vehicle\bs path. Make sure to also pay attention to
other vehicles.
System limits
If the system detects a malfunction or a system
limit during the maneuvering or parking proce-
dure, the procedure will be canceled:
= The vehicle is brought to a standstill.
= Transmission position ] is selected and the
electric parking brake is applied automatically.
= The vehicle is switched oM.
= The vehicle remains locked.
If the parking maneuver is canceled, a corre-
sponding message is displayed on the mobile
phone.
Depending on the situation, you can then take control of the procedure, maneuver the vehicleback to the starting position or manually take con-
trol of the vehicle.
The system limits of Active Parking Assist apply
(  page 264).
Certain environmental conditions, such as snow- fall or heavy rain, may lead to a parking space
being measured inaccurately or to connection problems with the mobile phone. Only use
Remote Parking Assist on level, high-grip ground.Driving and parking269

During the parking procedure, you should not
stand more than approx. 10 s (3.0 m) away from
the vehicle. At greater distances, the procedure will be interrupted and a corresponding message
will be displayed on the mobile phone. If you move closer to the vehicle, you will be able to continue
the procedure.

q Operating Remote Parking Assist
Requirements
For the Remote Parking Assist function, you require a mobile phone and the current Remote
Parking Assist app for your vehicle type.\bA list of compatible phones can be found at:
https://www.mercedes-benz-mobile.com/
The following operating systems are supported:
= Android!

\bDepending on the vehicle\bs equipment, button
1 may also be located in a diMerent position
in the center console.Press button 1.Select Parking Assistance menu 2.For further information on Remote Parking
Assist: select 3.If necessary, select another parking space 4
or select 5 to drive straight ahead into a
garage, for example.If necessary, change parking direction 6.\bAlternatively, you can begin parking with
Active Parking Assist (  page 266) and con-
tinue with the Remote Parking Assist from any vehicle position. To do this, stop the parking
process and select transmission position ].Switch oM the vehicle and get out, taking the
SmartKey with you.
Starting the parking procedure without selecting
in advance
Stop the vehicle and select transmission posi-
tion ].Switch oM the vehicle and get out, taking the
SmartKey with you.
Starting the parking procedure while outside the
vehicle
Unlock the vehicle.Driving and parking271

Carrying out a parking procedure with RemoteParking Assist\bKeep the vehicle SmartKey with you during
the parking procedure. You can cancel the parking procedure and bring the vehicle to astandstill by pressing a button on the Smart-
Key.\bOn completion of the parking procedure, the
vehicle is locked.
If you have started the parking procedure as
described above, the vehicle is ready to connect
to your mobile phone for a limited time.
Start the Remote Parking Assist app on your mobile phone and connect to the vehicle.Follow the instructions of the Remote ParkingAssist app.\bThe turn signal indicator is automatically
switched on when starting parking and switched oM when it is completed.\bIf the connection between the vehicle and the
mobile phone is interrupted while a parking
maneuver is being performed, the maneuvercan be continued if the connection is re-
established within a short time.&WARNING Risk of accident due to vehicle
swinging out while parking or pulling out
of a parking space
While parking or pulling out of a parking
space, the vehicle swings out and can drive
onto areas of the oncoming lane.
This could cause you to collide with objects or other road users.
Pay attention to objects and other road
users.Where necessary, stop the vehicle or
cancel the parking procedure with
Remote Parking Assist.Aser ending the parking procedure, ensure
that all vehicle doors, windows and the trunk
are closed. Secure the vehicle against rolling
away.Canceling the parking procedure
You can cancel the parking procedure of Remote
Parking Assist at any time and bring the vehicle to
a standstill.Cancel the parking procedure in the Remote Parking Assist app.
or
Press a button on the vehicle SmartKey.
or
Pull a door handle.

q Authorizing/de-authorizing a mobile phone for
Remote Parking Assist Multimedia system:
4 © 5
Settings 5
Assistance
5 Parking
Authorizing a new mobile phone
To use the Remote Parking Assist function, you
must authorize your mobile phone. You can authorize up to ten mobile phones.
Select Remote Parking Assist .272Driving and parking

Select Authorize a New Device .
Remote Parking Assist will be ready to con-
nect.Start the Remote Parking Assist App and addi-
tionally start the authorization process.
A connection prompt will be displayed.Scan the QR code on the central display.
The mobile phone will be authorized.
De-authorizing mobile phones
Select Remote Parking Assist .Select Deauthorize Devices .To de-authorize a mobile phone: select a
mobile phone.
The mobile phone will be deleted from the
device list.To de-authorize all mobile phones:
select Deauthorize All Devices .
All mobile phones will be deleted from the
device list.Maneuvering assistance

q Function of Drive Away Assist
Drive Away Assist can reduce the severity of an impact when pulling away. If the system detects
an obstacle in the direction of travel, the vehicle\bs
speed is brieOy reduced to approximately 1 mph
(2 km/h).
A risk of collision may occur in the following situa-
tions, forexample:
= If the driver mixes up the accelerator and
brake pedals.
= If the driver engages an incorrect gear.
= If the driver depresses the accelerator pedal
with too much force.
Drive Away Assist is active under the following
conditions:
= If the vehicle was stationary and the transmis-
sion position was changed to ^ or [.
= If the vehicle has rolled less than approx-
imately 3.3 s (1.0 m) since being at a stand-
still.
= If the detected obstacle is less than approx.
3.3 s (1.0 m) away.
The Drive-away Assist can be deactivated or acti-
vated in the Maneuvering Assistance menu
(  page 276).
If a critical situation is detected, the following symbol appears in red in the selected view in the Camera & Parking menu:

\bIf Drive Away Assist is not available, the same
symbol appears in gray. If the Camera & Park-
ing menu is not opened on the central display,
the symbol and pop-up of Parking Assist
PARKTRONIC both appear.
Drive Away Assist is only an aid. It is not a substi-
tute for your attention to the surroundings. The
responsibility for safe maneuvering and parking
always rests with you. Make sure that no persons,
animals or objects etc. are in the vehicle\bs path.
Driving and parking273

&WARNING Risk of accident caused by limi-
ted detection performance of Drive Away Assist
Drive Away Assist cannot always clearly iden-
tify objects and traPc situations.
Always pay careful attention to the traPc
situation; do not rely on Drive Away Assist alone.Be prepared to brake or swerve as nec-
essary, provided the traPc situation per-
mits and that it is safe to take evasive
action.
System limits
The system limits of Active Parking Assist apply
(  page 264).
On uphill gradients, the performance of Drive
Away Assist is restricted.

q Function of cross traPc warning
The cross traPc warning can warn you of crossing
traPc when you are exiting a parking space. The
radar sensors in the bumper also monitor the area
adjacent to the vehicle.
The cross traPc warning is active under the fol-
lowing conditions:
= Warning for Cross Traffic, Rear : the vehicle is
driving in reverse at a speed slower than approx. 6 mph (10 km/h).
= Warning for Cross Traffic, Front : the vehicle is
driving forwards at a speed slower than approx. 6 mph (10 km/h) and the camera
image is shown on the central display
(  page 259).
The Warning for Cross Traffic, Front can be deac-
tivated or activated in the Maneuvering Assis-
tance menu (  page 276).
If a critical situation is detected, the following symbol appears in red in the selected view in theCamera & Parking menu:

Warning for Cross Traffic, Rear = The vehicle can be braked automatically when
crossing traPc is detected.
=
If the menu Camera & Parking is not open and
a critical situation is detected, a warning
appears on the central display together with
the PARKTRONIC Parking Assist pop-up.
Warning for Cross Traffic, Front
= If Active Parking Assist is active, the vehicle
can be braked automatically when crossing
traPc is detected.
= If Active Parking Assist is not active but the
menu Camera & Parking is open, a warning
appears.
= If the menu Camera & Parking is not open,
the system cannot react to crossing traPc.
The cross traPc warning is only an aid and not a
substitute for your attention to the surroundings. The responsibility for safe maneuvering and park-
ing always rests with you. Make sure that no per- sons, animals or objects etc. are in the vehicle\bs
path.274Driving and parking

&WARNING Risk of accident caused by limi-
ted detection performance of the cross traPc warning
The cross traPc warning cannot always clearly
identify objects and traPc situations.
Always pay careful attention to the traPc
situation; do not rely on the cross traPc
warning alone.Be prepared to brake or swerve as nec-
essary, provided the traPc situation per-
mits and that it is safe to take evasive
action.
System limits
\bIf the cross traPc warning is not available, the
/ symbol appears in gray.
The system limits of Active Parking Assist apply
(  page 264).
If the radar sensors are obstructed by vehicles or other objects, detection is not possible.
In the following situations, the cross traPc warn-
ing is not available:
= On inclines

qManeuvering brake function
The maneuvering brake function can prevent colli-
sions with pedestrians when the vehicle is back-
ing up at slow speeds. If the rear view camera
detects a person in the vehicle path, the vehicle
can be braked to a standstill.
The maneuvering brake function can intervene
under the following conditions:
= The vehicle is backing up at a speed slower
than 6 mph (10 km/h).
= The camera image is shown in the central dis-
play (  page 259).
Depending on the country, you can activate and deactivate the maneuvering brake function in the Maneuvering Assistance menu ( page 276).
If the maneuvering brake function is triggered, the
following symbol appears in red in the selected view in the Camera & Parking menu:

\bIf the maneuvering brake function is not avail-
able, the same symbol appears in gray.
The maneuvering brake function is only an aid. It
is not a substitute for your attention to the sur- roundings. The responsibility for safe maneuveringand parking remains with you. Make sure that no
persons, animals or objects etc. are in the maneu- vering range.
&WARNING Risk of accident caused by limi-
ted detection by the maneuvering brake
function
The maneuvering brake function cannot
always clearly detect people. Other obstacles
are not detected by the function.
In these cases, the function may brake unnec-
essarily or not brake at all.
Always pay careful attention to the traPc
situation; do not rely on the maneuvering brake function alone.Be ready to brake.Driving and parking275

System limits
Observe the system limits of the following func-
tions:
= Active Parking Assist (  page 264)
= 360° camera (  page 255)
= Rear view camera (  page 254)
The maneuvering brake function is not available in
the following situations:
= on inclines

q Activating/deactivating the maneuvering assis-
tant
Multimedia system:
4 © 5
Settings 5
Assistance
5 Parking\bThis function is available on demand
(  page 27).Select Maneuvering Assistance .Activate or deactivate the desired maneuver-
ing assistant.Memory Parking Assist

q Function of Memory Parking Assist
Memory Parking Assist can park your vehicle
using a previously stored parking space. You can store parking procedures with a total distance of
up to 550 yds (500 m) (110 yds (100 m) per park- ing or exiting procedure).
During parking or exiting, the system can travel a
previously stored path of up to approximately 110 yds (100 m) to or out of the desired parking
space, for example, from the driveway entrance
into the garage.
Within a radius of approx. 165 yds (150 m), only
one parking or exiting procedure can be recorded.
Only use Memory Parking Assist on private prop-
erty. Use on public roads, e. g. in public parking
spaces, is not permitted.
Memory Parking Assist is only an aid. It is not a
substitute for your attention to the surroundings. The responsibility for safe maneuvering and park-
ing remains with you. Make sure that no persons, animals or objects etc. are in the maneuveringrange.
System limits
Observe the system limitations of Active Parking
Assist (  page 264).&WARNING Risk of accident due to objects
located above or below the detection
range of Memory Parking Assist
If there are objects above or below the detec-
tion range, the following situations may arise:
= Memory Parking Assist may steer too
early.
= The vehicle may not stop in front of these
objects.
This result in a collision.
In these situations, do not use Memory
Parking Assist.
Objects located above or below the detection
range of Memory Parking Assist may not be detected during the parking procedure.
Drawbars of parked trailers, among other objects,
that protrude into the parking space may not be
detected.
276Driving and parking

Do not use Memory Parking Assist in the following
situations, for example:
= in extreme weather conditions suchas ice,
packed snow or in heavy rain.
= when transporting a load that protrudes
beyond the vehicle.
= if the parking space is on a steep downhill or
uphill gradient.
= when snow chains are installed.

q Recording a parking procedure using Memory
Parking Assist
Requirements
= The entire route is, for example, within the
bounds of your own property and not on pub-
lic roads.
= The system needs reference points in the sur-
roundings to orient itself, such as fences,
walls or trees. Therefore, aser you start the
vehicle, you must drive for a certain distance
Nrst. No new route can be recorded unless
enough reference points have been detected
in the surrounding area.Press button 1.
The Camera & Parking view will open on the
central display.Select menu 2 Memory Parking Assist .Brake the vehicle to a standstill at the desired
starting point of the assisted parking proce-
dure, e.g. a driveway entrance.To start recording: press 3.\bIf not all conditions for a recording are met,
symbol 3 will be greyed out.Driving and parking277

Park the vehicle in the desired parking space.Do not exceed 5 mph (8 km/h).To end recording: stop the vehicle and press
3 again.
The recording will be stored.\bYou can delete and rename stored parking
procedures in the Memory Parking Assist set-
tings.

q Parking with Memory Parking Assist
Requirements
= A parking procedure has been recorded.
Press button 1.
The Camera & Parking view will open on the
central display.Select Memory Parking Assist menu 2.Brake the vehicle to a standstill at the starting
point of the stored parking procedure.To start the parking procedure: press .Select the stored parking procedure from the
list.Follow the instructions on the central display.The vehicle will drive into the selected parking
space.\bThe turn signal indicator will not be switched
on automatically. You are responsible for
engaging the turn signal indicator in accord-
ance with the traPc conditions.Once the parking procedure is complete, safe-
guard the vehicle against rolling away.

q Exiting a parking space with Memory Parking
Assist
Requirements
= The unparking procedure was recorded
together with the respective parking proce- dure and stored separately within one drivingcycle.
= The vehicle was parked using Memory Parking
Assist.
Press button 1.
The Camera & Parking view will open on the
central display.Select Memory Parking Assist menu 2.278Driving and parking