MERCEDES-BENZ EQS SALOON 2022 Owners Manual


Brake to a stop.
Measur
ement is incremental, in steps of
10 km/h to a stop. If the braking procedure is
started e.g. at a speed of 157 km/h, meas-
urement starts as soon as 150 km/h has
been reached.
Storing and calling up measured values
If measur
ement is completed or cancelled, a
prompt appears asking whether the measurement
should be saved. 
ConNrm t
he prompt with OK to save.
Calling up saved measurements 
± Select History. 
Select Acceleration, Quarter-mile or Braking.
Select a measurement.
The desir

ed measurement is displayed in
detail.
or 
Delete a measurement. Calling up the telemetry display
Multimedia system:
4 TRACK PACE 5
Telemetry
The t

elemetry display shows current vehicle data
as a digital value and as a diagram. Up to four
parameters can be selected to be shown on the
display.
For example:
= Engine speed
= Wheel angle
= Speed
= Steering angle 
Set the desired parameters. 
Set the time.
The se

t parameters are evaluated in the dia-
gram for the selected time. ConNguring
AMG TRA
CK PACE Requirements:
T

o connect a mobile device to the TRACK PACE
app: =
The TRA
CK PACE app is installed on the
mobile end device.
= The mobile end device is connected to the
multimedia system via Wi-Fi.
Multimedia system: 4 TRACK PACE 5
=
Connect mobile device via the TRACK PACE app
The TRACK PACE app makes it possible to record
videos and to synchronise them with stored
tracks. 
Select TRACK PACE App. 
Select Authorise new device . 
Start the TRACK PACE app on the device to be
connect
ed. 
Select Continue and conNr
m the authorisation
prompt.
A four-digit code is shown on the central dis-
play. 
Enter the code in the smartphone.
The de
vice is authorised. 358
MBUX multimedia system

De-authorising the mobile device

Select TRACK PACE App. 
Select a device. 
ConNrm the message prompt with Yes.
The device is de-authorised.
Setting the TRACK PACE display on the head-up
displa
y and driver's display 
Select IC and HUD contents .
Activate or deactivate the desired contents.
The cont
ents on the head-up display and the
driver's display are adapted.
% For further information on the Head-up Dis-
pla
y ( page 321).
% Further information about the driver's display
(  pag

e 319).
Setting acoustic feedback 
Select Acoustic feedback.
A scale wit
h values from 0 to 10 is shown. 
Select a setting. Displaying statistics 
Select TRACK PACE statistics.
S
tatistics on the current user proNle are dis-
played.
The following data are displayed:
= Driving time
= Track driven
= Recorded tracks
= Recorded Track Races
= Laps recorded
= Recorded Drag Races
= Maximum design speed
Activating the ambient light
If t
his function is active, the vehicle interior is lit in
red or green depending on delta time. 
Select Ambient lighting. 
Activate or deactivate the function.
Adjusting the dashcam
If t
he vehicle is equipped with a dashcam, it can
be used in AMG TRACK PACE. 
Select Dashcam. 
Select Track Race or Drag Race and activ
ate
Activate recording . 
You can set which overlay is to be used in the
r

ecorded video under Video overlay contents. Drive system settings
Calling up the energy
Oo
w display Multimedia system:
4 © 5
Info 
Select Energy flow .
The ener
gy Oow in the vehicle will be dis-
played. MBUX multimedia system
359

Navigation and
tr aPcNotes on navigation
Route guidance with augmented reality
&
WARNING Risk of accident and injur
y as a
result of distraction, incorrect depiction or
wrong interpretation of the display
The camera image of the augmented reality
displa
y is not suitable as a guide for driving. 
Always keep an eye on the actual tr
aPc
situation. 
Avoid extended observation of the cam-
er

a image. &
WARNING Risk of accident and injur
y due
to imprecise positioning of additional
information
The additional information from the augmen-
t
ed reality display may be inaccurate and is
not a substitute for observing and assessing
the actual driving situation. 
Always keep an eye on the actual tr
aPc
situation when carrying out all driving
manoeuvres. Switching navigation on
Multimedia system:
4 © 
Alternatively, press the © butt
on on the
steering wheel on the right (  page 336).
The Zero Layer with the digital map is dis-
played. Navigation overview
Digital map and
user
-speciNc applications 1
Navigation module (reduced view) or EQ mod-
ule (r

educed view)
Route guidance active:
Navigation module shows in the reduced view
t
he information relevant to the route, e.g. the
next charging stop, the destination and a traf-
fic delay
{ ends t
he current route guidance
Tapping opens the navigation module in the
e
xpanded view with the Route
Route guidance not active: 360
MBUX multimedia system

EQ module is shown in the reduced view
Tapping opens the EQ module in the expan-
ded vie
w with the charging functions
2 Entering a destination
3 Calls up the Control Centre in the status line
4 Current vehicle position (vehicle symbol or
ar

row)
5 Display area with entertainment sources,
phone, activ

e applications and suggestions
6 Searches for POIs, e.g. charging stations
\ and par
king facilities j, as well as sets
map orientation and map type
7 Navigation window shows the next manoeuvre
(zoomed out vie
w) or the route monitor
(zoomed in view)
For example, with active route guidance, route
sections of t
he route list, displays for upcom-
ing driving manoeuvres, lane recommenda-
tions
 Switc
hes oM navigation announcements

3
Distance from current vehicle position and
r emaining driving time
4 Searches for an additional charging station
EQ module (expanded view) 1
Sets the charging program ( pag
e 229)
2 Current state of charge of the high-voltage
batt

ery 3
Maximum state of charge (depending on the
se
tting)
4 Sets the next charging break (to use a less
e

xpensive tariM)
5 Sets the departure time
6 Opens the socket Oap
7 Activates or deactivates ECO charging Entering a destination
Requirements:
= F

or online search: an Internet connection is
established.
= Mercedes me connect is available.
= You have set up a user account in the
Mercedes me Portal.
= The vehicle is connected with the user
account and you have accepted the terms of
use.
Further information can be found at: https://
www.mercedes.me
= The service is available and has been activa-
ted. Multimedia system:
4 © 5
ª Where to" Example: entering a POI or address
1 Input line with current entry
2 Search result
3 Selects destination input, displays further
des
tination inputs with double arrow
4 Deletes an entry 362
MBUX multimedia system

5
Adopts the search result in the input line and
continues t
he search
6 Deletes the last character entered
7 Hides the keypad
8 Switches to handwriting recognition
9 Starts the MBUX voice assistant
A Sets the written language
B Switches to digits and special characters
C Switches to upper-case or lower-case letters 
Enter the destination in 1. The entr
ies can
be made in any order.
The search results are displayed in a list.
% Online search results for POIs may contain
additional inf

ormation, for example opening
times and prices. The information is provided
by an online map service.
This online function is not available in all
countries.
% You can enter a destination as a 3 word
addr

ess from what3words.
This option is not available in all countries. 
Hide the keyboard with v. 
Select the destination in the list.
The r

oute is calculated.
% Observe the notes on the MBUX multimedia
sy
stem (  page 327). Calculating a route with Electric Intelligence and
using se

ttings for route guidance Requirements:
= The des

tination has been entered.
= The destination address is shown.
= For navigation with Electric Intelligence:
- Mercedes me connect is available.
- You have a Mercedes me connect user
account and the vehicle is connected with
the account.
- The "Navigation with Electric Intelligence"
service is available and activated in the
Mercedes me Portal.
The services "Navigation with Electric Intel-
ligence", "Display of charging stations" and
"Mercedes me Charge" are required for
optimal function. -
The Schedule charging stops r
oute option
is switched on. Example: detailed display
1 Saves destination as a favourite ( Schedule
charging stops is switc
hed on)
Calls up alternative routes ( Schedule charg-
ing stops is switc
hed oM) MBUX multimedia system
363

2
Calculates the route and starts route guid-
ance
3 Selects a point of interest in the vicinity of the
des tination
4 Destination information, online content (e.g.
pictur

es, opening hours), three-word address
from what3words
Aser selecting a des
tination, Electric Intelligence
automatically and intelligently calculates the route
to the destination. This is updated during route
guidance. The route with Electric Intelligence con-
tains the required charging stations as intermedi-
ate destinations. The charging stations are deter-
mined taking account of the driving distance and
the estimated charging times. 
Select one of the options.
% When the Schedule charging stops r
oute
option is switched oM, a route without charg-
ing stations is calculated.
% If the destination is located in a multi-storey
car par
k, for example, and corresponding data
is available, the parking levels are displayed. Saving a destination as a favourite 
Select

Setting the state of charge of the high-voltage bat-
t
ery when the charging station and destination
are reached 
Select = in t
he navigation module
( page 360). 
Select Route . 
Select Charge level at destination or Charge
level at charging stations. 
Move the control knob to the les or r
ight and
set the preferred state of charge in percent
(%).
The destination or charging station along the
route is reached with the set state of charge.
To reach a charging station, the system uses the
batt
ery capacity, e.g. up to 10% residual energy
content (state of charge). You can increase this
state of charge on arrival at the charging station
and destination, e.g. to 25% at the charging sta-
tion and 50% at the destination. %
In the event of increased energy consumption
while dr

iving, e.g. with headwind, the following
options are available on the system side:
= The charging station is safely reached
even at states of charge of less than 10 %.
= Navigation with Electric Intelligence
selects a closer charging station for the
route.
% If a charging facility is available at the destina-
tion, t

he state of charge can be lowered below
10 %. The Min. message appears on the cen-
tral display. Make sure that the range monitor
is switched on.
Selecting a provider for charging stations 
Select = in t
he navigation module
( page 360). 
Select Route . 
Activate or deactivate Mercedes me Charge.
If t
he option is activated, only charging sta-
tions payable with Mercedes me Charge are
taken into account when selecting the charg-
ing station.
or 
Activate All.
All c

harging stations known to the navigation
system are taken into account when calculat-
ing routes with Electric Intelligence, regardless
of the type of payment.
It may be necessary to register with the pro-
vider.
Switching the range monitor on or oM
The activ
ated range monitoring assists with mes-
sages on the driver and central display to ensure
safe arrival at the destination. 
Select = in t
he navigation module
( page 360). 
Select Route . 
Activate or deactivate Range monitoring.
T
o reach the destination with the state of
charge set by the driver, the range is perma-
nently monitored when the option is switched
on.
% This function is not available in all countries. MBUX multimedia system
365

Displaying a route overview with charging station
1
Arrival time at charging stop, type of charging
s
tation
2 Charging stop shows the charging time rec-
ommended b
y the navigation with Electric
Intelligence as well as states of charge on
arrival and onward journey for an optimal
travel time 3
Distance from current vehicle position and
r
emaining driving time
4 Searches for an additional charging station
You can inOuence t
he route calculated by the nav-
igation with Electric Intelligence using options 1
and 4. 
Select one of the options.
Ignoring a charging station
If y
ou do not want to drive to the selected charg-
ing station, it can be removed for the current
route guidance. The navigation with Electric Intelli-
gence tries to plan the best possible alternative
charging station for the route. 
Select 1.
The e

xpected charging power, the dynamic
charge level display as well as the current
state of charge and the predicted charging tar-
get are displayed, for example. 
Select Ignore. 
Select Ignore during this journey.
The c

harging station is removed from the cur-
rent route. %
Aser selecting Details, t
he detailed informa-
tion about the charging station is displayed.
Adding a charging station
If y
ou want to drive to a charging station earlier on
the route, for example, you can search for an
additional charging station. If the charging station
is suitable for the route, it will be accepted by the
navigation with Electric Intelligence. 
Select 4. 
Select a charging station.
% You can also search for a charging station
using t
he \ symbol on the digital map or
next to ª Where to".
Selecting a route type 
Select = in t
he navigation module
( page 360). 
Select Route .
The r
oute is calculated as a fast route with a
short journey time. Trailer mode is available if
a trailer has been coupled with the vehicle. If
available, you can select online routes. TraPc
announcements for the route are taken into
account via Dynamic route guidance H.366
MBUX multimedia system

%
Trailer mode and online routes are not availa-
ble in all countr
ies and for all vehicles.
Activating a commuter route
% A user pr
oNle has been created and Allow
destination suggestions has been activated in
the user options ( page 347). Route guid- ance is not active. 
Select = in t
he navigation module. 
Select Route . 
Activate Activate commuter route .
The na
vigation system automatically detects
that the vehicle is on a commuter route.
For the daily commuter route, traPc events on
the route are also reported when driving with-
out active route guidance. 
To select or delete a commuter route:
select Start or