MERCEDES-BENZ EQS SALOON 2022 Owner's Guide

Electric vehicles have an electric motor. The elec-
tr
ic motor's energy supply is provided by the high-
voltage on-board electrical system. &
DANGER Risk of deat
h and Nre due to
modiNed and/or damaged components of
the high-voltage on-board electrical sys-
tem
The vehicle's high-voltage on-board electrical
sy
stem is under high voltage. If you modify
component parts in the vehicle's high-voltage
on-board electrical system or touch damaged
component parts, you may be electrocuted. In
addition, modiNed and/or damaged compo-
nents may cause a Nre.
In the event of an accident or impact to the
vehicle underbody, components of the high-
voltage electrical system may be damaged
although the damage is not visible. 
Never make any modiNcations t
o the
high-voltage on-board electrical system. 
Do not switch on or use the vehicle if its
high-v
oltage on-board electrical system components have been
modiNed or dam-
ag
ed. 
Never touch damaged components of
t

he high-voltage on-board electrical sys-
tem. 
Aser an accident, do no
t touch any com-
ponents of the high-voltage on-board
electrical system. 
Aser an accident, ha
ve the vehicle trans-
ported away. 
Have the components of the high-voltage
on-boar
d electrical system checked at a
qualiNed specialist workshop and
replaced if necessary. The components of the vehicle's high-voltage on-
boar
d electrical system are marked with yellow
warning stickers. The cables of the high-voltage
on-board electrical system are orange. High-voltage components that can become very
ho
t are marked with an additional warning sticker: 28
General notes

Vehicles with an electric motor generate
signiN-
cantl y less driving noise than vehicles with com-
bustion engines.
Therefore the vehicle may not be heard by other
road users due to the signiNcantly reduced driving
noise.
It is for this reason that the vehicle is equipped
with a sound generator, which serves as an acous-
tic vehicle alerting system (AVAS). Notes on assembling the number plate on the
fr

ont licence plate holder
* NOTE Malfunctions and sy
stem failures
due to incorrect assembly of the licence
plate on the front licence plate holder If the licence plate is incorrectly assembled on
t

he front licence plate holder, sensors, cam-
eras or driving and safety systems may mal-
function or fail.
Observe the following points when assembling
the licence plate on the front licence plate
holder: 
Assemble the licence plate directly on
t

he licence plate holder without advertis-
ing media or other holders. 
Assemble the licence plate so that it
does no
t protrude above or to the side of
the licence plate adapter. Declarations of conformity and notes on driving
in diMer

ent countries Electromagnetic compatibility
The electromagnetic compatibility of the vehicle
com

ponents has been checked and certiNed
according to the currently valid version of Regula-
tion UN-R 10. Vehicle installed radio components
Only for EU and EFTA countries and countries that
r
ecognise the EU manufacturer's declaration of
conformity: The following information applies to all wireless
com

ponents of the vehicle and of the information
systems and communication devices integrated in
the vehicle:
The manufacturers of the wireless components
ensure that all wireless components installed in
the vehicle comply with Directive 2014/53/EU.
The full texts of the EU declarations of conformity
are available at the following web address:
https://moba.i.daimler.com/markets/ece-row/
baix/cars/certiNcates-of-conformity/en@(B/
index.html General notes
29

You can obtain further information from a
Mer
cedes-Benz service centre.
For Israel only:
It is prohibited to make any change to a vehicle-
installed radio component that could aMect the
wireless speciNcations of the device, including
sosware changes, replacement of the original
antenna, or adding the option to connect the
device to an external antenna, without Nrst obtain- ing approval from the Communica-tions Ministry,
because of concer
n about wireless interference.
For the United Kingdom only: The following information applies to all wireless
com

ponents of the vehicle and of the information
systems and communication devices integrated in
the vehicle:
The manufacturers of the radio components
declare that all radio equipment installed in the
vehicle is in compliance with the relevant statu-
tory requirements. The full texts of the declara-
tions of conformity are available at the following
web address:
https://moba.i.daimler.com/markets/ece-row/
baix/cars/certiNcates-of-conformity/en@(B/
index.html For Brazil only:
Note on two-way radio systems in the vehicle:30
General notes

These systems are not protected against harmful
int
erference and must not cause interference in
properly approved systems.
For Jamaica only:
All wireless vehicle components have received
type approval from the SMA.
For Nigeria only: Connection and use of the radio communications
eq
uipment in this vehicle is permitted by the
Nigerian Communications Commission For Russia only:
The manufacturers of the wireless components
ins

talled in the vehicle hereby declare that all
wireless components installed in the vehicle com-
ply with the technical regulations for two-way
radios. You can obtain further information from a
Mercedes-Benz service centre. For Ukraine only: The manufacturers of the wireless components
ins

talled in the vehicle hereby declare that the
wireless components installed in the vehicle com-
ply with the technical regulations for two-way
radios. You can obtain further information from a
Mercedes-Benz service centre.
Type of wireless applications and speciNcations in
accordance with 2014/53/EU
Besides the typical frequencies for mobile com-
munication cars by Mercedes-Benz make use of
the following automotive radio applications. General notes
31

Type of wireless applications and
speciNcations in accor dance with 2014/53/EUTechnology
Frequency rangeTransmission output/magnetic Neld s
trength
Remote Keyless Entry 20 kHz (9!

Technology
Frequency rangeTransmission output/magnetic Neld s trength
Interior Monitoring Radar, RLAN 5.8 GHz UNII-3 (5725!

Technology
Frequency rangeTransmission output/magnetic Neld s trength
UMTS (Band I, III, VIII) +24 dBm (+1/-3 dB)
LTE (Band 1, 3, 7, 8, 20, 28) +23 dBm (±2 dB)
RAMSES (Router And Mobile SErviceS) GSM (E-GSM 850 / E-GSM 900, Class 4)
GSM (E-GSM 1800 / E-GSM 1900, Class 4)< +32.5 dBm (±1 dB)
< +29.5 dBm (±1 dB)
UMTS (WCDMA FDD I, II, III, IV, V, VIII, XIX, Class
3) < +23.5 dBm (±1 dB)
LTE (FDD B1, B2, B3, B4, B5, B7, B8, B9, B18,
B19, B21, B28, Class 3) < +23 dBm (±1 dB)
LTE (TDD B38, B40, B41, Class 3) < +23 dBm (±1 dB)
GNSS (1559!

Information about the
speciNc absor ption rateVehicle components
SAR value in W/kgApplicable limit value
Compensator ECE DE003 & ECE DE004 < 0.2 W/kg 2 W/kg
DAI RSE 1.8 W/kg2 W/kg
HERMES communication module < 0.4 W/kg2 W/kg General notes
35

Vehicle components
SAR value in W/kgApplicable limit value
RAMSES communication module 0.036 W/kg2 W/kg
NRCS2P 0.003 W/kg2 W/kg
NTG6 0.199 W/kg4 W/kg
NTG7 0.08 W/kg2 W/kg
NTG7RSU 0.07 W/kg2 W/kg
Tablet PC SM-T230NZ 0.7 W/kg4 W/kg
Radio data transmission telephone system 0.24 W/kg 2 W/kgImporter information for wireless components
For Moldova only:
Im
porter
S.C. GRAND PREMIUM S.R.L. Moldova
mun. Chisinau, str. Hîncesti sos., 2/2
For Turkey only:
Importer
Mercedes Benz Otomotiv Ticaret ve Hizmetler
A. =. Genel Merkez Ak

Milton Keynes, MK15 8BA
England
Jack
Copy and translation of the original declaration of
conf
ormity:
EC declaration of conformity
1.
The undersigned, representing
Manufacturer:
BRANO a.s.
747 41 Hradec nad Moravicí, Opavsk