MERCEDES-BENZ GLA SUV 2022 Owners Manual

or

Select Start new route guidance.
The des tination address is set as the new des-
tination. The previous destination and the
intermediate destinations are deleted. Route
guidance to the new destination begins.
Selecting route settings 
Select =. 
Select Advanced. 
Select Route . 
Select the route type. 
Take tr
aPc information into consideration with
Dynamic route guidance H.
Select route options with Avoid options.
Activate Suggest alternative route.
Alt
ernative routes are calculated for every
route. 
Activate Activate commuter route .
If t
he requirements are met, the multimedia
system automatically detects that the vehicle
is on a commuter route. Route guidance
begins without voice output. Activating route guidance with augmented reality 
During route guidance, tap on the camera
symbol on t

he media display.
The camera image will be shown instead of
the navigation map before a turning manoeu-
vre and will show additional information. 
To return to the navigation map: t
ap on the
camera symbol again.
Displaying additional information in the camera
imag
e 
Select =. 
Select Advanced. 
Select Augmented Reality . 
Activate Street names and House numbers.
Dur
ing route guidance, street names and
house numbers are shown in the camera
image. Using map functions
Multimedia system:
4 © 5
Navigation
Se

tting the map scale 
To zoom in: t
ap twice quickly with one Nnger
on the media display. 
To zoom out: t
ap with two Nngers on the
media display.
Moving the map 
Move one Nng
er in any direction on the
touchscreen. 
To reset the map to the current vehicle posi-
tion: pr
ess = brieOy.
Selecting map orientation 
Tap repeatedly on the


Activate or deactivate Motorway information.Using services
Requirements:
= Ther
e is an Internet connection.
= Mercedes me connect is available.
= You have set up a user account in the
Mercedes me Portal.
= The vehicle is connected to a user account
and you have accepted the conditions of use
for the service.
Further information can be found at: https://
www.mercedes.me
= The service is available and has been activa-
ted.
= The following additional conditions apply to
the Parking service:
- The navigation services option is available,
subscribed to and activated in the
Mercedes me Portal.
- The parking service is part of the scope of
the Navigation Services. Multimedia system:
4 © 5
Navigation
Displa

ying the traPc situation with Live TraPc
Information 
Select =. 
Activate Traffic. 
Select Advanced. 
Select View . 
Select Map elements . 
Activate Traffic incidents , Free-flowing traffic
and Delay .
If tr

aPc information has been received, then
traPc incidents such as roadworks, road
blocks, local area reports (e.g. fog) and warn-
ing messages are displayed.
The traPc delay is displayed for the current
route. TraPc delays lasting one minute or lon-
ger are taken into consideration.
Displaying hazard warnings with Car-to-X commu-
nication
If hazar

d warnings are available these can be
shown as symbols on the map. The display depends on the settings for the
Traffic and Traf-
fic incidents op

tions. 
Set the options.
If Traffic is switc

hed oM and Traffic incidents
is switched on, the symbols are shown on the
prospective route.
Displaying weather information and other map
cont
ents 
Select =. 
Select Advanced. 
Select View . 
Select Map elements . 
Scroll up and show the ONLINE MAP CON-
TENTS cat

egory. 
Switch on a service, e.g. Weather.
Cur
rent weather information is displayed on
the navigation map, e.g. temperature or cloud
cover. MBUX multimedia system
319

Parking service
* NOTE Damag e to the vehicle due to not
observing the maximum permitted head-
room clearance If the vehicle height is greater than the maxi-
mum per
mitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged. 
Observe the signposted headroom clear-
ance. 
If the vehicle height is greater than the
per
mitted headroom clearance, do not
enter. 
Observe the changed vehicle height with
add-on r
oof equipment. *
NOTE V
ehicle damage due to failure to
observe local information and parking
conditions The data is based on the information provided
b
y the respective service providers. Mercedes-Benz does not guarantee the accu-
r

acy of the information provided in relation to
the car park or parking area. 
Always observe the local information and
conditions. %
This service is not available in all countries. 
Select = and activ
ate Parking. 
Tap on j in t
he map. 
Select a parking option.
The map sho
ws the parking options in the
vicinity.
The following information is displayed (if avail-
able):
= Destination address, distance from current
vehicle position and arrival time
= Information on the multi-storey car
park/car park, for example:
- Opening times
- Parking charges
- Current occupancy
- Maximum parking time -
Maximum access height
The maximum access height sho

wn by
the parking service does not replace
the need for observation of the actual
circumstances.
= Available payment options (Mercedes pay,
coins, bank notes, cards)
= Details on parking tariMs
= Number of available parking spaces
= Payment method (e.g. at the parking
meter)
= Services/facilities at the parking option
= Telephone number 
Calculate the route (  pag
e 317). Notes on the dashcam
*
NOTE Obser
ve legal regulations and data
protection provisions You are legally responsible for operation and
use of t
he dashcam functions. 320
MBUX multimedia system

The legal requirements relating to operation
and use of t he dashcam can vary depending
on the country in which the dashcam is oper-
ated.
This function is not permitted in all countries. 
Before using the dashcam, inform your-
self about t
he content of the legal regu-
lations, in particular the data protection
regulations in the respective country of
use. 
Observe the legal regulations, in particu-
lar t

he data protection regulations. Selecting a USB device for a video recording with
t
he dashcam Requirements:
= A

t least one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam 
Select the USB device. %
When USB devices contain multiple partitions,
r
ecorded video Nles are not always displayed
in the recording list.
Mercedes-Benz recommends that you use
USB devices with one partition. Starting or stopping video recording with the
dashcam Requirements:
= A USB de

vice is connected with the multime-
dia system .
= The vehicle is switched on.
Multimedia system: 4 © 5
Mercedes me & Apps
5 Dashcam 
If several USB devices are connected with the
multimedia sy

stem, select a USB device
( page 321). 
Select the Individual recording or Loop
recording r
ecording mode.
If Individual recording is selected and the
memory is full the recording stops. If Loop recording has been select

ed, several
short video Nles are recorded. When the mem-
ory limit is reached, the oldest video Nle is
deleted and recording is continued automati-
cally. 
To start: select Start recording.
The lengt
h of the recording is shown. The
Please do not remove the storage medium.
message appears. The video Nle is stored on
the USB device. 
To end: select End recording .
A report may appear in the following cases: = F

or the Individual recording recording mode:
the memory is full or there are only a few
minutes recording time available. The video
recording stops or will be stopped imminently.
Change the USB device or delete a video Nle.
= If a video recording has started and a national
border is detected, the National border
crossed. Please observe the countryspecific
regulations regarding video recording. mes-
sage appears.
This function is not available in all countries. MBUX multimedia system
321

=
The camer a is not functional, the Camera
unavailable message appears.
Have the camera checked in a Mercedes-Benz
service centre. Telephone
Telephony
Notes on telephony
&
WARNING Risk of dis
traction from operat-
ing integrated communication equipment
while the vehicle is in motion
If you operate communication equipment inte-
g
rated in the vehicle when driving, you could
be distracted from the traPc situation. This
could also cause you to lose control of the
vehicle. 
Only operate this equipment when the
tr

aPc situation permits. 
If you cannot be sure of this, stop the
v
ehicle whilst paying attention to road and tr
aPc
conditions and operate the
equipment with the vehicle stationary. &
WARNING Risk of accident fr
om operating
mobile communication equipment while
the vehicle is in motion
Mobile communication devices distract the
dr
iver from the traPc situation. This can also
cause the driver to lose control of the vehicle. 
As a driver, only operate mobile commu-
nication de

vices when the vehicle is sta-
tionary. 
As a vehicle occupant, use mobile com-
munication de

vices only in the designa-
ted area, e.g. in the rear passenger com-
partment. You must observe the legal requirements for the
countr

y in which you are currently driving when
operating mobile communication equipment in
the vehicle. &
WARNING Risk of injur
y due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incor
rectly, they can slide or be thrown around
and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone receptacles cannot always retain all
objects within.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction. 
Always stow objects so that they cannot
be t
hrown around in such situations. 
Always make sure that objects do not
pr

otrude from stowage spaces, luggage
nets or stowage nets. 
Close the lockable stowage spaces
bef
ore starting a journey. 
Always stow and secure heavy, hard,
point
ed, sharp-edged, fragile or bulky
objects in the boot/load compartment. 322
MBUX multimedia system

Observe the additional information on stowing
mobile communications de
vices correctly:
= Loading the vehicle ( page 122)
= Stowing and securing the mobile phone
(  page 140)
Bluetooth n
!

Telephone menu overview
1
Bluetooth n
de vice name of the currently con-
nected mobile phone/of the mobile phone
2 Bluetooth n
de
vice name of the currently con-
nected mobile phone/of the mobile phone
(two phone mode)
3 Battery status of the connected mobile phone
4 Signal strength of the mobile phone network
5 Options 6
Device manager
7 Messages
8 Numerical pad
9 Contact search Telephony operating modes overview
Depending on y

our equipment, the following tel-
ephony operating modes are available:
= A mobile phone is connected to the multime-
dia system via Bluetooth n
. 324
MBUX multimedia system

=
T wo mobile phones are connected with the
multimedia system via Bluetooth n
(two phone
mode).
- You can use all the functions of the multi-
media system with the mobile phone in the
foreground.
- You can receive incoming calls and mes-
sages with the mobile phone in the back-
ground.
You can interchange the mobile phone in
the foreground and background.
Connecting a mobile phone
Requirements:
= Bluetooth n
is activated on the mobile phone
(see the manufacturer's operating instruc-
tions).
= Bluetooth n
is activated on the multimedia sys-
tem. Multimedia system:
4 © 5
Phone
Sear
ching for a mobile phone 
Select í. 
Select Connect new device.
Connecting a mobile phone
A
uthorisation follows using secure simple pairing. 
Select a mobile phone.
A code is displa

yed in the multimedia system
and on the mobile phone. 
If both codes match, conNr
m the code on the
mobile phone.
Functions in the telephony menu
In t
he telephony menu you have the following
functions, for example:
= Making calls, e.g.:
- R Accept a call
- L End call
- J Create conferen. call
- Accept or reject a waiting call =
Managing cont
acts, e.g.:
- Downloading mobile phone contacts
- Managing the format of a contact's name
- Saving a contact as a favourite
= Receiving and sending messages, e.g.:
- Using the read-aloud function
- Dictating a new message Mercedes me app
Mercedes me calls
Making a call via the overhead control panel
% Mercedes me calls are not possible in every
countr
y. Find out at a Mercedes-Benz service
centre if these functions are available in your
country. MBUX multimedia system
325

1
me button for service or information calls
2 SOS button cover
3 SOS button (emergency call system)
Making a Mercedes me call 
Press me button 1. Making an emergency call 
To open the cover of SOS button 2 , pr ess it
brieOy. 
Press and hold SOS button 3 f
or at least one
second.
If a Mercedes me call is active, an emergency call
can s
till be triggered. This has priority over all
other active calls.
Information about the Mercedes me call
A call to the Mercedes-Benz Customer Centre has
been initiated via the me button in the overhead
control panel or the multimedia system
(  page 325).
Using the voice dialogue system you access the
desired service:
= Accident and Breakdown Management
= Mercedes-Benz Customer Centre for general
information about the vehicle
You can Nnd information on the following topics:
= Activation of Mercedes me connect
= Operating the vehicle =
N
earest Mercedes-Benz service centre
= Other products and services from Mercedes-
Benz
Data is transferred during the connection to the
Mercedes-Benz Customer Centre ( page 328).
Calling the Mercedes-Benz Customer Centre
using the multimedia system
Requirements: = Access to a mobile phone network is available.
= The contract partner's mobile network cover-
age is available in the respective region.
= The vehicle must be switched on so that vehi-
cle data can be transferred automatically.
Multimedia system: 4 © 5
Phone 5
g 
Call Mercedes me connect .
Aser conNr

mation, the multimedia system
sends the required vehicle data. The data
transfer is shown in the media display. 326
MBUX multimedia system

Then, you can select a service and be connected
t o a specialist at the Mercedes-Benz Customer
Centre.
Calling the Mercedes-Benz Customer Centre aser
automatic accident or breakdown detection
Requirements: = The vehicle has detected an accident or break-
down situation.
= The vehicle is stationary.
= The hazard warning lights are switched on.
% This function is not available in all countries.
The vehicle can detect accident or breakdown sit-
uations under cer
tain circumstances.
Requirements for collision detection in the con-
text of accident management:
= The vehicle is equipped with an anti-thes
alarm system (ATA) (code 551).
= The vehicle is equipped with the interior pro-
tection (code 882).
= The vehicle is equipped with the Anti-Thes
Protection Package (code P54). =
The collision de
tection service with thes notiN-
cation has been activated on Mercedes me
connect.
If a collision is detected when the tow-away pro-
tection is primed on a locked vehicle, you will
receive a notiNcation in the multimedia system
when you switch the vehicle on.
Find out at a Mercedes-Benz service centre if this
functions is available in your country.
In the event an accident or breakdown is detec-
ted, the emergency guide shows safety notes in
the multimedia system display. This may take a
few seconds.
% The availability of collision detection depends
on t
he vehicle.
In the event an accident or breakdown is detec-
t
ed, the emergency guide shows safety notes in
the multimedia system display.
Aser quitting the emergency guide display on the
multimedia system, a prompt appears asking
whether you would like to get support from the
Mercedes-Benz Customer Centre. 
Select Call .
= Aser y

our agreement, or if the Mercedes
me connect service "Accident and Break-
down Management" is active, the vehicle
data is transferred automatically
( page 330).
= The Mercedes-Benz Customer Centre
takes your call and organises the break-
down and accident assistance.
You may be charged for these services.
% Depending on the severity of the accident, an
aut

omatic emergency call can be initiated.
This has priority over all other active calls
(  page 337).
% In addition, if the Mercedes me connect
ser

vice "Telediagnostics" is active, a similar
prompt can appear aser a delay in the event
of a breakdown. If you are already in contact
with the Mercedes-Benz Customer Centre or
have already received support, this prompt
can be ignored or declined. MBUX multimedia system
327