MERCEDES-BENZ GLB 2023 Owners Manual

*NOTE Damage caused by objects in the
footwell or behind the rear seats
When adjusting the fore-and-as position, the
rear seats and/or the object can be damaged.
Stow objects in a suitable place.
This function is available only for vehicles with a
movable rear bench seat.
The components of the rear bench seat can be
moved. You can move the right-hand and les-hand
parts together with the center part independently of each other. This allows you to make the foot-well larger in either the second or third row of
seats.
Lis release handle 1 and slide the corre-
sponding part of the bench seat into the
desired position.Let go of release handle 1.Make sure that the seat is engaged.Adjusting the rear seat backrests mechanically&WARNING Risk of injury due to seat
backrests folded forwards
If the seat backrest of the rear seat is folded
forwards, persons in the third row of seats
may hit parts of the seat mechanism, espe-
cially in the event of an accident, braking
maneuver or abrupt change of direction.
If there is a person in the third row of
seats, the rear seat in front of them must
be folded back to the driving position
before the journey begins.Persons in the third row of seats should
not rest their legs on a seat backrest
that has been folded forwards.You can fold the backrests of the second row of seats forwards to get in or out.Seats and stowing99

&WARNING Risk of becoming trapped if the
seat is not engaged
The seat does not engage when folded for-
wards. The seat can fold backwards unexpect-
edly, e.g. when accelerating, braking or in the
event of an abrupt change of direction or an accident.
People in the seat\bs sweep can become trap-
ped.
If a seat is folded forwards, always fold it
back before driving oM.Make sure that the seat is engaged.
Requirements:
= The area into which the seat is folded is clear.
Adjusting the seat backrest
You can fold the seat backrests on the second
row of seats forwards for the following situations:
= For easier access to the cargo compartment
= Vehicles with a third row of seats: for getting
in or out
You can set the seat backrest to diMerent angles.
If you no longer require the seat backrest to be
folded down for loading or for getting in and out, fold it back into place.Hold the seat backrest in place with your hand
or back.Gently pull one of release loops 1 and fold
the seat backrest forwards or backwards.Ensure that the seat backrest is engaged.Folding the seat backrest forwards to enter the vehicle (vehicles with a third row of seats)&WARNING Risk of injury when folding the
seat backrest on the second row of seats
forwards
If the handle for the seat backrest on the sec- ond row of seats is pulled from the third row
of seats, the seat backrest on the second row of seats will fold forwards and will not engage.
People in the sweep of this seat backrest can
become trapped.
When getting out of the third row of seats, do not hold the seat backrest on
the second row of seats.
Vehicles with EASY-ENTRY function: If a seat on
the second row of seats is located in the EASY- ENTRY area, this will be shown on the driver\bs dis-play.
If necessary, fold the seats on the third row
into position (  page 117).100Seats and stowing

Pull handle 1.
The seat backrest will fold forwards.*NOTE Damage to the seat backrest handle
caused by pulling
The handle can be damaged if it is used to pull
the seat forwards.
Move the seat forwards by the seat backrest.Move the seat forwards by the seat backrest.Hold the seat Nrmly in place while doing so.
Folding the seat backrest back to the upright
position (vehicles with third row of seats)
Swivel seat backrest back until it engages.
The seat backrest will remain in the cargo position.Slide the seat backwards.The seat will stop in the front position.Move the seat into the desired position
(  page 98).If necessary, fold in the seats on the third row
(  page 115).\bTo increase the size of the cargo compart-
ment, you can move the seat backrests into the cargo compartment Ooor position
(  page 113).Head restraints

qAdjusting the front seat head restraints man-
ually
&WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
= If you adjust the driver\bs seat, the head
restraint, the steering wheel or the mirror while the vehicle is in motion
= If you fasten your seat belt while the vehi-
cle is in motion
Before starting the vehicle: in particular,
adjust the driver\bs seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.Seats and stowing101

&WARNING Risk of injury due to head
restraints not being installed or being
adjusted incorrectly
If head restraints have not been installed or
have not been adjusted correctly, there is an increased risk of injury in the head and neck
area, e.g. in the event of an accident or when
braking.
Always drive with the head restraints
installed.Before driving oM, make sure for every
vehicle occupant that the center of the
head restraint supports the back of the
head at about eye level.Do not interchange the head restraints of the front and rear seats. Otherwise, you will not be
able to adjust the height and angle of the head restraints correctly.
Adjust the head restraint fore-and-as position so
that it is as close as possible to the back of your head.To raise: pull the head restraint up.To lower: press release knob 1 in the direc-
tion of the arrow and push the head restraint
down.To move the driver\bs head restraint forwards:
press release knob 2 and pull the head
restraint forwards.To move the driver\bs head restraint back- wards: press release knob 2 and push the
head restraint backwards.

q Adjusting the head restraints of the rear seats
manually
To raise: pull the head restraint up.102Seats and stowing

To lower: press release knob 1 in the direc-
tion of the arrow and push the head restraint
down.If the center seat on the second row of seats
is not occupied: press the head restraint down
all the way.
Vehicles with a third row of seats
The head restraints on the third row of seats have a usage position and a non-usage position. Theusage position is the extended, top position in
which the head restraint engages; the non-usage
position is the bottom, retracted position of the
head restraint. If the seats on the third row of
seats are being used, the head restraint must be in the top, engaged usage position.
When choosing a seat, bear in mind the limited space available. With the seat in the correct,
upright position, your head should not touch the
headliner.
If the third row of seats is occupied: move the
head restraints to the very top and have them
engage there.If the third row of seats is not occupied: move
the head restraints to the very bottom.
q Installing/removing the rear seat head
restraints
RemovingRelease the rear seat backrest and fold it for-
wards slightly (  page 113).Pull the head restraint upwards as far as it will
go.Push release knob 1 in the direction of the
arrow and pull out the head restraint.
Installing
Insert the head restraint such that the notches on the bar are on the les when viewed in the
direction of travel.Push the head restraint down until it engages.Fold the rear seat backrest back until it
engages.
ConNguring the seat settings
Multimedia system:
4 © 5
Comfort 5
Seat Comfort
Adjusting the backrest contour in the lumbar region of the seat backrest (lumbar)
Select Lumbar .Select the settings = for the desired seat.Adjust the air cushions.
Adjusting the backrest side bolsters
Select Side Bolsters .Seats and stowing103

Adjust the air cushions for the desired seat.
Selecting the massage program for the front seats
Multimedia system:4 © 5
Comfort 5
Massage
Select Wave Massage or Pulsating Massage .Start the program for the desired seat e.To set the massage intensity: switch High
Intensity on or oM .
Resetting seat settings
Multimedia system:
4 © 5
Comfort 5
Seat Comfort
Select

Press button 1 repeatedly until the desired
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are oM, the seat heating is switched oM.\bThe seat heating will automatically switch
down from the three heating levels aser 8, 10
and 20 minutes until the seat heating switches oM.
Switching the seat ventilation on/oM
Requirements:
= The power supply is switched on.
Press button 1 repeatedly until the desired
blower setting has been reached.
Depending on the blower setting, up to three
indicator lamps will light up. If all indicator
lamps are oM, the seat ventilation is switched
oM.Steering wheel
Adjusting the steering wheel manually
&WARNING Risk of accident due to adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lowing situations in particular:
= If you adjust the driver\bs seat, the head
restraint, the steering wheel or the mirror while the vehicle is in motion
= If you fasten your seat belt while the vehi-
cle is in motion
Before starting the vehicle: in particular,
adjust the driver\bs seat, head restraint,
steering wheel and mirror, and fasten
your seat belt.&WARNING Risk of entrapment for children
when adjusting the steering wheel
Children could injure themselves if they adjust
the steering wheel.
Seats and stowing105

Never leave children unattended in thevehicle.When leaving the vehicle, always take the key with you and lock the vehicle.
Unlocking
Fold release lever 1 down as far as it will go.Adjust height 2 and distance 3 to the
steering wheel.
Locking
Fold release lever 1 up as far as it will go.Check and make sure that the steering col-
umn is locked by moving the steering wheel.
Switching the steering wheel heater on/oM
Depending on the vehicle version, the steering
wheel heater can be switched on and oM using a
switch on the steering wheel.
Requirements
= The vehicle is switched on.
Push the switch into position 1 or 2.
If indicator lamp 3 lights up, the steering
wheel heater is switched on.
When you switch the vehicle oM, the steering
wheel heater will switch oM.
106Seats and stowing

Easy entry and exit feature
Using the easy entry and exit feature
&WARNING Risk of accident when pulling
away during the adjustment process of
the easy entry and exit feature
You could lose control of the vehicle.
Always wait until the adjustment process
is complete before driving oM.&WARNING Risk of becoming trapped dur-
ing adjustment of the easy entry and exit
feature
You and other vehicle occupants could
become trapped.
Ensure that no-one has any body parts in
the range of movement of the seat.
If there is a risk of becoming trapped by the
driver\bs seat:
Press the seat adjustment switch. The adjustment process will be stopped.You can stop the adjustment process by pressing
one of the memory function position switches.&WARNING Risk of becoming trapped if
children activate the easy entry and exit
feature
Children could become trapped if they acti- vate the easy entry and exit feature, particu-
larly when unattended.
Never leave children unattended in the vehicle.When leaving the vehicle, always take the key with you and lock the vehicle.
When the easy entry and exit feature is active, thedriver\bs seat will move backwards and the back-rest will be moved to a steeper position when:
= You switch oM the vehicle when the driver\bs
door is open.
= You open the driver\bs door when the vehicle is
switched oM.
\bThe driver\bs seat will then move backwards
only if it is not already at the rear of the seat adjustment range.
The seat backrest will then move forwards
only if it is not already at the front of the back- rest adjustment range.
The driver\bs seat will move back to the last drive
position when:
= You switch the vehicle on when the driver\bs
door is closed.
= You close the driver\bs door when the vehicle is
switched on.
The last drive position will be saved when: = You switch oM the vehicle.
= You call up the seat settings via the memory
function.
= You save the seat settings via the memory
function.
Seats and stowing107

Setting the easy entry and exit feature
Multimedia system:4 © 5
Settings 5
Vehicle
5 Automatic Seat Adjustment
5 Easy Entry/Exit
Activate or deactivate the function.
Memory function
Memory function
&WARNING Risk of an accident if the mem-
ory function is used while driving
If you use the memory function on the driver\bs
side while driving, you could lose control of
the vehicle as a result of the adjustments
being made.
Only use the memory function on the driver\bs side when the vehicle is station-
ary.&WARNING Risk of entrapment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat, you and other vehicle occupants !