MERCEDES-BENZ GLB 2023 Owners Manual

operating mobile communication equipment in
the vehicle.&WARNING Risk of injury due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incorrectly, they can slide or be thrown around
and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone receptacles cannot always retain all
objects within.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.
Always stow objects so that they cannot
be thrown around in such situations.Always make sure that objects do not
protrude from stowage spaces, parcel
nets or stowage nets.Close the lockable stowage spaces before starting a journey.Always stow and secure heavy, hard,
pointed, sharp-edged, fragile or bulkyobjects in the trunk/cargo compart-
ment.Observe the additional information on stowing
mobile communications devices correctly:
= Loading the vehicle (  page 109)
= Stowing and securing the mobile phone
(  page 128)
Bluetooth n
!

Further information can be obtained from anauthorized Mercedes-Benz Center or at: https://
www.mercedes-benz.com/connect
q Telephone menu overview1Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone2Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone
(two phone mode)3Battery status of the connected mobile phone4Signal strength of the mobile phone network5Options6Device manager7Messages260MBUX multimedia system

8Numerical pad9Contact search

qTelephony operating modes overview
Depending on your equipment, the following tel- ephony operating modes are available:
= A mobile phone is connected to the multime-
dia system via Bluetooth n
.
= Two mobile phones are connected with the
multimedia system via Bluetooth n
(two phone
mode).
- You can use all the functions of the multi-
media system with the mobile phone in the foreground.
- You can receive incoming calls and mes-
sages with the mobile phone in the back- ground.
You can interchange the mobile phone in
the foreground and background.

q Connecting a mobile phone
Requirements
= Bluetooth n
is activated on the mobile phone
(see the manufacturer\bs operating instruc- tions).
= Bluetooth n
is activated on the multimedia sys-
tem.
Multimedia system: 4 © 5
Phone
Searching for a mobile phoneSelect í.Select Connect New Device .
Connecting a mobile phone
Authorization follows using secure simple pairing.
Select a mobile phone.
A code is displayed in the multimedia system
and on the mobile phone.If both codes match, conNrm the code on the
mobile phone.
q Functions in the telephony menu
In the telephony menu you have the following
functions, for example:
= Making calls, e.g.:
- R Accepting a call
- L End Call
- J Create Confer. Call
- Accepting or rejecting a waiting call
= Managing contacts, e.g.:
- Downloading mobile phone contacts
- Managing the format of a contact\bs name
- Saving a contact as a favorite
= Receiving and sending messages, e.g.:
- Using the read-aloud function
- Dictating a new messageMBUX multimedia system261

Mercedes me app
Mercedes me calls

qMaking a call via the overhead control panel
1me button for service or information calls2SOS button cover3SOS button (emergency call system)
Making a Mercedes me call
Press me button 1.
Making an emergency call
To open the cover of SOS button 2 , press it
brieOy.Press and hold SOS button 3 for at least one
second.
If a Mercedes me call is active, an emergency call
can still be triggered. This has priority over all
other active calls.

q Information about the Mercedes me call
A call to the Mercedes-Benz Customer Center has
been initiated via the me button in the overhead
control panel or the multimedia system(  page 262).
Using the voice dialog system you access the desired service:
= Accident and Breakdown Management
= Mercedes-Benz Customer Center for general
information about the vehicle
You can Nnd information on the following topics:
= Activation of Mercedes me connect
=Operating the vehicle
= Nearest authorized Mercedes-Benz Center
= Other products and services from Mercedes-
Benz
Data is transferred during the connection to the
Mercedes-Benz Customer Center (  page 264).

q Calling the Mercedes-Benz Customer Center
using the multimedia system
Requirements
= Access to a mobile phone network is available.
= The contract partner\bs mobile network cover-
age is available in the respective region.
= The vehicle must be switched on so that vehi-
cle data can be transferred automatically.
Multimedia system: 4 © 5
Phone 5
gCall Mercedes me connect .
Aser conNrmation, the multimedia system
sends the required vehicle data. The data
transfer is shown in the media display.262MBUX multimedia system

Then you can select a service and be connected
to a specialist at the Mercedes-Benz Customer
Center.

q Calling the Mercedes-Benz customer center
aser automatic accident or breakdown detection
Requirements: = The vehicle has detected an accident or break-
down situation.
= The vehicle is stationary.
= The hazard warning lights are switched on.\bThis function is not available in all countries.
The vehicle can detect accident or breakdown sit-
uations under certain circumstances.
Requirements for collision detection in the con- text of accident management:
= The vehicle is equipped with an anti-thes
alarm system (ATA) (code 551).
= The vehicle is equipped with the interior pro-
tection (code 882).
= The vehicle is equipped with the Anti-Thes
Protection Package (code P54).
= The collision detection service with thes notiN-
cation has been activated on Mercedes me
connect.
If a collision is detected when the tow-away alarm
is armed on a locked vehicle, you will receive a
notiNcation in the multimedia system when you
switch the vehicle on.
Find out at an authorized Mercedes-Benz Center if this functions is available in your country.
In the event an accident or breakdown is detec-
ted, the emergency guide shows safety notes in
the multimedia system display. This may take a few seconds.\bThe availability of collision detection dependson the vehicle.
In the event an accident or breakdown is detec-
ted, the emergency guide shows safety notes in
the multimedia system display.
Aser quitting the emergency guide display on the
multimedia system, a prompt appears asking
whether you would like to get support from the
Mercedes-Benz customer center.
Select Call.
= The vehicle data is sent automatically
(  page 266).
= The Mercedes-Benz customer center takes
your call and organizes the breakdown and
accident assistance.
You may be charged for these services.\bDepending on the severity of the accident, an
automatic emergency call can be initiated. This has priority over all other active calls
(  page 270).\bIn addition, if the Mercedes me connect
service "Telediagnostics" is active, a similar
prompt can appear aser a delay in the event
of a breakdown. If you are already in contact
with the Mercedes-Benz customer center or
have already received support, this prompt
can be ignored or declined.\bIf you answer the prompt for support from the Mercedes-Benz customer center with Later,
the message will be hidden and appear again later.MBUX multimedia system263

The prompt triggered by the Mercedes meconnect service "Telediagnostics", can eitherbe conNrmed or declined. Aser being
declined, this will not be shown again.

q Arranging a service appointment via a
Mercedes me call
If you have activated the maintenance manage-
ment service, relevant vehicle data is transferred
automatically to the Mercedes-Benz customer
center. You will then receive individual recommen-
dations regarding the maintenance of your vehi- cle.
Regardless of whether you have consented to the maintenance management service, the multime-dia system reminds you aser a certain amount of
time that a service is due. A prompt appears ask- ing if you would like to make an appointment.
To arrange a service appointment: select Call.
Aser your agreement, the vehicle data is
transferred and the Mercedes-Benz customer
center takes your preferred appointment date.
The information is then sent to your desired
service outlet.This will contact you to conNrm the appoint-
ment and if necessary consult about the
details.\bIf you select Later aser the service message
appears, the message is hidden and reap- pears at a later time.

q Data transferred during a Mercedes me call
When you make a service call via Mercedes me,
data is transmitted. This enables targeted advice
and a smooth service.
The following requirements must be fulNlled for
the transfer of the data:
= The vehicle is switched on.
= The required data transfer technology is sup-
ported by the mobile phone network provider.
= The quality of the mobile connection is suP-
cient.
Multi-stage transfer depends on the following fac- tors:
= Reason for the initiation of the call
= The available mobile phone transmission tech-
nology
= The activated Mercedes me connect services
= The service selected in the voice control sys-
tem\bThe scope of the transmitted data depends on
the vehicle model and equipment. For techni-
cal reasons, not all data is available at all
times.
Data transfer if Mercedes me connect services
are not activated
If no Mercedes me connect services are activa-
ted, the following data is transferred:
= Vehicle identiNcation number
= Time of the call
= Reason for the initiation of the call
= Country indicator of the vehicle
= Set language for the multimedia system
= Telephone number of the communication plat-
form installed in the vehicle
264MBUX multimedia system

If a call is made for a service appointment via the
service reminder, the following data is also trans-
mitted:
= Current mileage and maintenance data
If a call is made aser automatic accident or break-
down detection using the multimedia system, the following data is also transmitted:
= Current mileage and maintenance data
= Current vehicle location
If Accident and Breakdown Management is called
via the voice control system, the following data
can also be called up from the vehicle by the
Mercedes-Benz Customer Center:
= Current vehicle location
Data transfer if Mercedes me connect services are activated
An overview of the data transmitted can be found
in the respective terms of use for Mercedes me
connect services. These can be obtained in the
Mercedes me Portal: https://
me.secure.mercedes-benz.comData processing
The data transmitted within the scope of the call is deleted from the processing system aser the
call is Nnished, in so far as this data is not being
used for other activated Mercedes me connect
services.
The incident-speciNc data is processed and stored
in the Mercedes-Benz Customer Center and, if required to process the incident, forwarded to the
service partner authorized by the Mercedes-Benz Customer Center. Please take note of the dataprotection information on the Mercedes me Inter-
net page https://www.mercedes.me or in the recorded message immediately aser calling the
Mercedes-Benz Customer Center.\bThe recorded message is not available in every country.
Mercedes me connect

q Information on Mercedes me connect
Mercedes me connect consists of multiple serv-
ices.
You can use the following services via the multi-
media system and the overhead control panel, for
example:
= Accident and Breakdown Management (me
button or situation-dependent display in the multimedia system)
= Mercedes-Benz Emergency Call System (auto-
matic emergency call and SOS button)
The Mercedes me connect Accident and Break-
down Management and the Mercedes-Benz emer-
gency call centers are available to you around the
clock.
The me button and the SOS button can be found
on the vehicle\bs overhead control panel
(  page 262).
You can also call the Mercedes-Benz customer
center using the multimedia system (  page 262).
Please note that Mercedes me connect is a Mercedes-Benz service. In emergencies, Nrst call
the national emergency services using the stand-
ard national emergency service telephone num-
bers. In emergencies, you can also use theMBUX multimedia system265

Mercedes-Benz emergency call system
(  page 270).
Observe the conditions of use for Mercedes me
connect and other services. These can be
obtained in the Mercedes me Portal: https://
me.secure.mercedes-benz.com
Further information about Mercedes me connect
services can be obtained in the Mercedes me Por- tal: https://me.secure.mercedes-benz.com

q Information on Mercedes me connect Accident
and Breakdown Management\bAccident and Breakdown Management is not
available in every country. Contact an author-
ized Mercedes-Benz Center to Nnd out
whether this function is available in your coun- try.
The Accident and Breakdown Management can
include the following functions:
= Supplement to the Mercedes-Benz emergency
call system (  page 270)
If necessary, the contact person at the
Mercedes-Benz emergency call center for-
wards the call to Mercedes me connect Acci-
dent and Breakdown Management. Forward-
ing the call is however not possible in all coun-
tries.
= Breakdown assistance by a technician on
location and/or the towing away of the vehicle to the nearest authorized Mercedes-Benz Cen-
ter
You may be charged for these services.
= Addition to the emergency guide aser auto-
matic accident or breakdown detection
(  page 263)
In the event of a breakdown or accident, fur-
ther vehicle data is sent which enables optimal support by the Mercedes-Benz customer cen-
ter and the authorized service partner or
breakdown assistance.
= Addition to the Mercedes me connect service
Telediagnostics
With the Telediagnostics function, speciNc
wear and failure reports are recorded by the
service provider, in so far as these can be clearly interpreted and are available through
the monitoring of components that are subject
to diagnostics.If your vehicle detects a breakdown or threat of a breakdown, you may be prompted via the
multimedia system to contact the Mercedes- Benz customer center for further help. Thisprompt in the multimedia system only appears
when the vehicle is stationary.\bThese services are subject to technical
restrictions such as the mobile phone cover- age, mobile network quality and the ability ofthe processing systems to interpret the trans-ferred data. In some circumstances, this can
result in delays or the failure of the informa- tion to appear in the multimedia system.
Please note that the service and breakdown call is
a Mercedes-Benz service. In emergencies, be
sure to contact the usual national emergency
number Nrst or use the Mercedes-Benz emer-
gency call system (  page 269).
More information about Mercedes me connect
services can be obtained in the Mercedes me Por- tal: https://me.secure.mercedes-benz.com
266MBUX multimedia system

qData transferred during Mercedes me connect
call services
The data transferred during a Mercedes me con- nect call depends on:
= The reason for initiation of the call
= The service that is selected in the voice con-
trol system
= The activated Mercedes me connect services
You can Nnd out which data is transferred when
using the services in the currently valid Mercedes
me connect terms of use and the data protection
information for Mercedes me connect. You can Nnd these in your Mercedes me user account.Overview of the Mercedes me & Apps menu
When you log in with a user account to the
Mercedes me Portal, then services and oMers
from Mercedes-Benz will be available to you.
For more information consult an authorized
Mercedes-Benz Center or visit the Mercedes me Portal: https://me.secure.mercedes-benz.com
\bMake sure you always keep the Mercedes me
Apps updated.
You can call up the menu using Mercedes me &
Apps in the multimedia system.
In the Mercedes me & Apps menu, the following
options can be available:
= Connecting the vehicle with the Mercedes me
user account
= Deleting a connection between a user account
Mercedes me and the vehicle
= Calling up the Mercedes me services
= Calling up apps such as In-Car OPce or the
web browser depending on availability
Web browser overview
The web browser is started using the Mercedes
me & Apps menu.
MBUX multimedia system267

1URL entry2Bookmarks3Web page, back4Web page, forwards5To refresh/stop6Options\bWebsites cannot be shown while the vehicle is
in motion.Overview of Smartphone Integration
With Smartphone Integration, you can use certain
functions on your mobile phone via the multime- dia system display.
Only one mobile phone at a time can be connec-
ted via Smartphone Integration to the multimedia system. Also for use with two phone mode withSmartphone Integration, only one additional
mobile phone can be connected via Bluetooth n
to
the multimedia system.
The full range of functions for Smartphone Inte-
gration is only possible with an internet connec-
tion. The appropriate application must be down-
loaded on the mobile phone to use Smartphone
Integration. The mobile phone must be switched on and connected to a USB port with the