MERCEDES-BENZ GLE 2020 Owners Manual

InstrumentDisplayoverview
Mercedes-AMGvehicles: be sure to observe
the notes in the Supplement. Otherwise, you
may fail to recognize dangers.&WARNING Risk of accident due to an
instrument display malfunction
If the Instrument Display has failed or mal

&WARNING Danger of burns when open

0061 Makes/accepts a call0076 Rejects/ends a call500E2 Calls up the home screen6Touch Control multimedia system70038 Back button
Operatingtheon-boardcomputer
Mercedes-AMGvehicles: observe the notes in
the Supplement. Otherwise, you may fail to rec

%VehicleswithoutActiveDistanceAssist
DISTRONIC: press the 00E2 button to call
up the menu bar of the on-board computer.%The illustration shows the Instrument Display
in the Widescreen Cockpit.Toscrollinthemenubar: swipe left or
right on left-hand Touch Control 2.Tocallupamenuorconfirmaselection:
press left-hand Touch Control 2.Toscrollthroughdisplaysorlistsonthe
menu: swipe upwards or downwards on left-
hand Touch Control 2.Tocallupasubmenuorconfirmaselec

=Progressive
= Understated
= Standard Displays
Showingdisplaycontentontheinstrument
cluster
Additional display content can also be shown on
the instrument cluster.
%The display content on the instrument clus

=Navigation
= Trip
= Radio
= Media
= Styles and display
= Service4Display content, right (example: tachometer)
Display content selection, right:
= Tachometer
= Average fuel consumption
= ECO display
= Navigation
= G-meter
= Assistant display
= 4MATIC
= Suspension (equipment-dependent)Overviewofdisplaysonthemultifunction
display1Outside temperature2Time3Digital speedometer4Display section5Drive program6Transmission position284Instrument Display and on-board computer

Further displays on the multifunction display:0097Gearshift recommendation ( page 182)WActive Parking Assist (  page 261)

=Consumption Info : fuel life cycle consump

Trip computer (example)1Total distance2Driving time3Average speed4Average fuel consumption
ResettingvaluesontheTripmenuoftheon-
boardcomputer
On-board computer:
4 Trip
%The spelling on the main menu displayed
may differ. Therefore, observe the menuoverview for the Instrument Display (  page 281).
You can reset the values of the following func

3Estimated arrival time at next destination4Current roadExample: change of direction announced1Distance to the change of direction2Road to which the change of direction leads3Change-of-direction symbol4Recommended lane (white)5Possible lane6Lane not recommended (dark gray)Further possible displays on the Navigation
menu:
= Direction of Travel : display of direction of
travel and road currently being traveled on.
= New Route... or Calculating Route... : a new
route is being calculated.
= Road Not Mapped : the road is unknown, e.g.
for newly built roads.
= No Route : no route could be calculated to
the selected destination.
= Off Map : the map for the current location is
not available.
= Area of Dest. Reached : when an intermediate
destination is reached, the intermediate des