MERCEDES-BENZ GLE 2020 Owners Manual

Page 341 of 650

=Entering characters with handwriting recog

Page 342 of 650

On the multimedia systemTomute:press volume control 1.
The current audio source is switched off.
The 0063 symbol appears in the status line
of the media display.
If you are listening to a radio station, for
example, and switch off the sound then all
media sources will be muted.Traffic and navigation announcements can
still be heard in this case. Likewise, voice
control and telephony are not affected.Toswitchon: turn volume control 1 or
change the media source.Adjustingthevolume
Adjustingwiththecontrolknob
On the multifunction steering wheel340MBUX multimedia system

Page 343 of 650

On the multimedia systemTurn volume control 1.
The volume of the current volume group (e.g.
entertainment) is set. The volume of other
groups can be adjusted separately.
Adjust the volume in the following situations:
= during a traffic announcement
= during a navigation announcement=during a telephone call
Settinginthemenu
Press the © button.Select Settings .Select System .Select Audio.Select a volume setting.Set the volume.
Enteringcharacters
Usingthecharacterinputfunction
&WARNING Risk of distraction from infor

Page 344 of 650

Character input can be started with a control
element and resumed with another.When the keypad is shown, enter the charac

Page 345 of 650

Using the keyboard1Input line2Shows suggestions during input (if available)3Deletes an entry4DeletesPressing or pressing briefly deletes the last
character enteredPressing and holding deletes the entry5Accepts an entry6Switches to handwriting input7Enters a space8Changes the keyboard language9Switches to special charactersASwitches to digits and additional special
charactersABC Switches to letters (level 2)BPressing or pressing briefly switches
between upper-case and lower-case lettersPressing and holding switches to upper-case
letters permanently
If available, the p symbol allows you to
change to voice input.
%When Touchpad Tap is switched on D,
tapping is sufficient to select a character or an option (  page 319).Call up the character entry to rename a
favorite, for example (  page 335).MBUX multimedia system343

Page 346 of 650

Select the character by swiping and pressing.The character is entered in input line 1.
Suggestions are shown in 2.Toselectasuggestion: select one of the
entries.Resume character input.Toenteranalternativecharacter: press
and hold a character.Select the character.Toendcharacterinput: press the ( but

Page 347 of 650

5Enters a space6Switches to input using the keyboard7Accepts an entry8Writes characters on the drawing surface
If available, the p symbol allows you to
change to voice input.
%When Touchpad Tap is switched on D,
tapping is sufficient to select an option
(  page 319).Call up the character entry to rename a
favorite, for example (  page 335).When the keyboard is displayed, select v.Write the character on the touchpad with a
finger.
The character is entered in input line 1.
Suggestions are shown in 2.Toselectasuggestion: select one of the
entries.Resume character input. The letters can be written next to each other or above eachother.Toendcharacterinput: press the ( but

Page 348 of 650

Using the keyboard1Input line2Shows suggestions during input (if available)3Deletes an entry4DeletesPressing briefly deletes the last character
enteredPressing and holding deletes the entry5Accepts an entry6Switches to handwriting input7Enters a space8Changes the keyboard language9Switches to special charactersASwitches to digits and additional special
charactersABC Switches to letters (level 2)BPressing or pressing briefly switches
between upper-case and lower-case lettersPressing and holding switches to upper-case
letters permanently
If available, the p symbol allows you to
change to voice input.
Call up the character entry to rename a favorite, for example (  page 335).
The keyboard is shown.346MBUX multimedia system

Page 349 of 650

Briefly press on a character.
The character is entered in input line 1.
Suggestions are shown in 2.Toselectasuggestion: select one of the
entries.If available, display additional suggestions
with 0047 or 0048 .Resume character input.Toenteranalternativecharacter: press
and hold a character.Select the character.Toendcharacterentry: press briefly on
( .%The available editing functions depend on
the editing task, the language set and the
character level.Using handwriting input1Input line2Shows suggestions during input3Deletes an entry4DeletesMBUX multimedia system347

Page 350 of 650

Pressing briefly deletes the last character
enteredPressing and holding deletes the entry5Enters a space6Switches to input using the keyboard7Accepts an entry8Writes characters on the drawing surface
If available, the p symbol allows you to
change to voice input.
Call up the character entry to rename a favorite, for example (  page 335).When the keyboard is displayed, select v.Write the character with one finger on the
touchscreen.
The character is entered in input line 1.
Suggestions are shown in 2.Toselectasuggestion: select one of the
entries.If available, display additional suggestions
with 0047 or 0048 .Resume character input. The letters can be
written next to each other or above eachother.Toendcharacterentry: press briefly on
( .
Settingthekeyboardforcharacterentry
Multimedia system:
4 Settings 5
System 5
Controls
5 Keyboards and Handwriting
Confirm Select keyboards .
Select the keyboard language in the list.
Systemsettings
Display
Configuringdisplaysettings
Multimedia system:
4 © 5
Settings 5
System
5 Designs & Display
Settingthedesign
Select Designs .Select Classic , Sport or Progressive .
The multimedia system display changes
depending on the style selected. If you revert
to the factory settings, the Classic style is
set.Toadjusttheambientlightingtoastyle:
select Ambient Lighting Adjustment .
This function adjusts the ambient lighting for
the selected display style.
Settingthedisplaybrightness
Select Display Brightness .Select a brightness value.
Switchingthedisplaysurroundlighting
on/off
Select Illuminate Display Indirectly .
The indirect lighting is switched on or off.
Switchingthedisplayoff/on
Off: select Display Off .On:press a button, 002B, for example.
Selectingthedisplaydesign
Select Day/Night Design .348MBUX multimedia system

Page:   < prev 1-10 ... 301-310 311-320 321-330 331-340 341-350 351-360 361-370 371-380 381-390 ... 650 next >