MERCEDES-BENZ GLE COUPE 2023 Owners Manual

Select View.Activate Route Overview after Start .
Alternative routes are calculated for every
route.
Selecting alternative routes
\bIf Route Overview after Start has been
switched on and a route has been calculated,
the function is available.In the navigation module (expanded view), select Alternative Routes .When the alternative routes have been calcu-
lated, display the route in the navigation win-
dow by swiping to the right or le"s.Select Start.
Activating a commuter route
\bA user pro"Nle has been created and Allow
Destination Suggestions has been activated
in the user options (  page 276). Route guid-
ance is not active.In the navigation module (expanded view), select =.Select Route.Activate Activate Commuter Route .
The navigation system automatically detects
that the vehicle is on a commuter route.
For the daily commuter route, tra"Pc events on
the route are also reported when driving with-
out active route guidance.To select or delete a commuter route:
select Start or

Selecting map orientationTap repeatedly on the

Displaying online map contentsIn the navigation module (expanded view),select =.Select View.Switch on an online service, e.g. Weather.
Current weather information is displayed on
the navigation map, e.g. temperature or cloud
cover.
The service information is not shown in all
map scales, e.g. weather symbols.
Parking service
*NOTE Damage to the vehicle due to not
observing the maximum permitted head-
room clearance
If the vehicle height is greater than the maxi- mum permitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged.
Observe the signposted headroom clear- ance.If the vehicle height is greater than the permitted headroom clearance, do not
enter.Observe the changed vehicle height with add-on roof equipment.*NOTE Vehicle damage due to failure to
observe local information and parking
conditions
The data is based on the information provided
by the respective service providers.
Mercedes-Benz does not guarantee the accu-
racy of the information provided in relation to
the car park or parking area.
Always observe the local information and
conditions.\bThis service is not available in all countries.In the navigation module (expanded view), select = and switch on Parking.Tap on ] the map.
or
In the route overview, select ] Parking
Spaces .Select the search position and search "Nlter,
e.g. Near destination and Parking garages .
The map shows car parks suited to the selec- ted settings.Select a parking option.The map shows the parking options in the
vicinity.
The following information is displayed (if avail- able):
= Destination address, distance from current
vehicle position and arrival time
= Information on the parking garage/car
park
For example, opening times, parking
charges, current occupancy, maximum
parking time, maximum access height .
The maximum access height shown by the parking service does not replace the need
for observation of the actual circumstan-
ces.MBUX multimedia system291

=Available payment options (Mercedes pay,
coins, bank notes, cards)
= Details on parking tari"Ms
= Number of available parking spaces
= Payment method (e.g. at parking meters)
= Services/facilities at the parking option
= Telephone numberCalculate the route (  page 288).
Notes on the dashcam
*NOTE Risk of legal consequences due to
violation of legal regulations and data pro-
tection provisions
You are legally responsible for operation and
use of the dashcam functions.
The legal requirements relating to operation
and use of the dashcam can vary depending
on the country in which the dashcam is oper-
ated.
This function is not permitted in all countries.
Before using the dashcam, read up on
the content of the legal regulations, in
particular the data protection require-
ments in the respective country of use.Observe the legal regulations, in particu-
lar the data protection requirements.\bObserve the following instructions for safe
operation:
= Only use FAT32 or exFAT formatted USB
storage devices.
= Use USB-IF certi"Ned USB storage devices.
USB-IF is a non-pro"Nt corporation and
stands for USB Implementers Forum.
Based on the USB speci"Ncation, USB-IF
certi"Nes, for example, USB versions, cor-
responding cables and plugs as well as energy supply processes via the USB
interface.
= USB storage devices may be damaged if
o"sen or permanently overwritten at high
speed. Mercedes-Benz recommends a
high-quality external SSD drive.The abbreviation SSD stands for Solid State Drive.\bThe "Nle size and therefore the duration of sin-
gle recording is limited by the limitations of the USB "Oash drive format. So FAT32 format-
ted USB "Oash drives do not allow "Nles larger
than 4 GB, for example. When the "Nle size is reached, the recording
stops and you receive a noti"Ncation.\bThe following functions are available in the
Gallery app:
= Switching write protection on or o"M
= Deleting video "Nles
Selecting a USB device for a video recording with
the dashcam
Requirements: = At least one USB device is connected with the
multimedia system .
Multimedia system: 4 © 5
Apps 5
Dashcam
Select the USB symbol.292MBUX multimedia system

Select the USB device.\bWhen USB devices contain multiple partitions,
recorded video "Nles are not always displayed
in the recording list. Mercedes-Benz recommends that you use
USB devices with one partition.
Starting or stopping video recording with the dashcam
Requirements: = For recording and saving a video "Nle: a USB
device is connected with the multimedia sys- tem .
= The ignition is switched on.
Multimedia system: 4 © 5
Apps 5
Dashcam
If several USB devices are connected with the
multimedia system, select a USB device
(  page 292).
If no USB device is selected, a selection is made automatically when recording starts.To select a recording mode: select Loop
Recording or Individual Recording .
Loop Recording records several short video
"Nles. When the memory is full, recording is
continued automatically. In doing so, other
"Nles will be overwritten starting with the oldest
"Nle.
Individual Recording stops recording when
the memory limit is reached. An individual
recording is automatically protected against
being overwritten.To start: select Start Recording .
The length of the recording is shown. The Do
not remove the storage medium during
recording. Before removing the storage
medium, eject it first. message appears. The
video "Nle is stored on the USB device.To end: select End Recording .\bIn some countries, geo-coordinates (longitude
and latitude) are shown in the video image.
For technical reasons, the geo-coordinates
may show greater inaccuracies.A report may appear in the following cases:
= Individual Recording : the memory is full or
there are only a few minutes recording time
available. The video recording stops or will be
stopped imminently.
Change the USB device or delete a video "Nle.
= The camera is not functional, the Camera
Unavailable message appears.
Have the camera checked in an authorized
Mercedes-Benz Center.
= If the country border indication has been
switched on .MBUX multimedia system293

Telephone
Telephony

qNotes on telephony
&WARNING Risk of distraction from operat-
ing integrated communication equipment
while the vehicle is in motion
If you operate communication equipment inte-
grated in the vehicle when driving, you could
be distracted from the tra"Pc situation. This
could also cause you to lose control of the
vehicle.
Only operate this equipment when the
tra"Pc situation permits.If you cannot be sure of this, stop the
vehicle whilst paying attention to road
and tra"Pc conditions and operate the
equipment with the vehicle stationary.&WARNING Risk of accident from operating
mobile communication equipment while
the vehicle is in motion
Mobile communication devices distract the
driver from the tra"Pc situation. This can also
cause the driver to lose control of the vehicle.
As a driver, only operate mobile commu-
nication devices when the vehicle is sta-
tionary.As a vehicle occupant, use mobile com-
munication devices only in the designa-
ted area, e.g. in the rear passenger com-
partment.You must observe the legal requirements for the
country in which you are currently driving when
operating the multimedia system and mobile com-
munication equipment in the vehicle.&WARNING Risk of injury due to objects
being stowed incorrectly
If objects in the vehicle interior are stowed
incorrectly, they can slide or be thrown around
and hit vehicle occupants. In addition, cup
holders, open stowage spaces and mobile
phone receptacles cannot always retain all
objects within.
There is a risk of injury, particularly in the
event of sudden braking or a sudden change
in direction.Always stow objects so that they cannot
be thrown around in such situations.Always make sure that objects do not
protrude from stowage spaces, parcel
nets or stowage nets.Close the lockable stowage spaces before starting a journey.Always stow and secure heavy, hard,
pointed, sharp-edged, fragile or bulky
objects in the trunk/cargo compart-
ment.Observe the additional information on stowing
mobile communications devices correctly:
= Loading the vehicle (  page 109)
Bluetooth n
connection:
294MBUX multimedia system

The menu view and the available functions in the
telephone menu are in part dependent on the
Bluetooth n
pro"Nle of the connected mobile
phone. If the mobile phone supports all the fol-
lowing Bluetooth n
pro"Nles, the full range of fea-
tures is available:
= PBAP (Phone Book Access Pro"Nle)
- The contacts on the mobile phone are
shown automatically on the multimedia system.
= MAP (Message Access Pro"Nle)
- The mobile phone message functions can
be used on the multimedia system.
= HFP (hands-free pro"Nle)
- Wireless telephony is available on the mul-
timedia system.
= SAP (SIM Access Pro"Nle)
- The car telephone has access to the SIM
card data and dials into the mobile phone
network via the exterior antenna.
Irrespective of this, Bluetooth n
audio functionality
can by used with any mobile radio unit.For information on the range of functions of the mobile radio unit to be connected, see the manu-
facturer\bs operating instructions.
Network connection:
The following cases can lead to the call being dis-
connected while the vehicle is in motion:
= You switch into a transmission/reception sta-
tion, in which no communication channel is free.
= The SIM card used is not compatible with the
network available
= A mobile phone with "Twincard" is logged into
the network with the second SIM card at the
same time
The multimedia system supports calls in HD Voice n
for improved speech quality. A require-
ment for this is that the mobile phone and the mobile phone network provider of the person you
are calling support HD Voice n
.
Depending on the quality of the connection, the voice quality may "Ouctuate.Further information can be obtained from an
authorized Mercedes-Benz Center or at: https://
www.mercedes-benz.com/connect.

q Telephone menu overview1Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone2Bluetooth n
device name of the currently con-
nected mobile phone/of the mobile phone
(two phone mode)3Signal strength of the mobile phone network4Battery status of the connected mobile phone5Options6MessagesMBUX multimedia system295

7Calls up devices8Numerical pad9Starts contact search

qTelephony operating modes overview
Depending on your equipment, the following tel- ephony operating modes are available:
= A mobile phone is connected to the multime-
dia system via Bluetooth n
.
= Two mobile phones are connected with the
multimedia system via Bluetooth n
(two phone
mode).
- You can use all the functions of the multi-
media system with both mobile phones.

q Connecting a mobile phone
Requirements
= Bluetooth n
is activated on the mobile phone
(see the manufacturer\bs Operator\bs Manual).
= Bluetooth n
is activated on the multimedia sys-
tem.
Multimedia system:
4 © 5
Phone 5
= 5
Devices
5 Devices
Searching for a mobile phoneSelect Connect New Device .
Connecting a mobile phone
Select a mobile phone.
A code is displayed in the multimedia system
and on the mobile phone.If both codes match, con"Nrm the code on the
mobile phone.

q Functions in the telephony menu
In the telephony menu you have the following
functions, for example:
= Making calls, e.g.:
- 3 Accepting a call
- L End Call
- Answering a call with a message
- J Conference
- Accepting or rejecting a waiting call
=
Managing contacts, e.g.:
- Downloading mobile phone contacts
- Managing the format of a contact\bs name
- Deleting favorites
= Receiving and sending messages, e.g.:
- Using the read-aloud function
- Dictating a new message296MBUX multimedia system

Mercedes me Apps
Mercedes me calls

qMaking a call via the overhead control panel
1me button for service or information calls2SOS button cover3SOS button (emergency call system)
Making a Mercedes me call
Press me button 1.
Making an emergency call
To open the cover of SOS button 2 , press it
brie"Oy.Press and hold SOS button 3 for at least one
second.
If a Mercedes me call is active, an emergency call
can still be triggered. This has priority over all
other active calls.

q Information about the Mercedes me call using
the me button
A call to the Mercedes-Benz Customer Center has
been initiated via the me button in the overhead control panel or the multimedia system(  page 297).
Using the voice dialog system you access the desired service:
= Accident and Breakdown Management
= Mercedes-Benz Customer Center for general
information about the vehicle
You can "Nnd information on the following topics:
= Activation of Mercedes me connect
= Operating the vehicle
= Nearest authorized Mercedes-Benz Center
= Other products and services from Mercedes-
Benz
Data is transferred during the connection to the
Mercedes-Benz Customer Center (  page 299).

q Calling the Mercedes-Benz Customer Center
using the multimedia system
Requirements
= Access to a GSM network is available.
= The contract partner\bs GSM network coverage
is available in the respective region.
= The vehicle must be switched on so that vehi-
cle data can be transferred automatically.MBUX multimedia system297

Multimedia system:4 © 5
Phone 5