MERCEDES-BENZ GLE SUV 2022 Owners Manual

=
Spor t +: approx. -25 mm
Vehicles with OM-road package
= Car wash: approx. +90 mm(  page 396)
= OM-road level +3: +90 mm
= OM-road level +2: +60 mm
= OM-road level +1: +30 mm
= Sport: approx. -15 mm
= Sport +: approx. -25 mm
If the entry/exit level function is activated, the
vehicle is lowered to the Sport + level to facilitate
entering/exiting the vehicle. When driving at
speeds of approximately 30 km/h or above, the
entry/exit level is deactivated and the vehicle is
raised (  page 291). Operation with a trailer or bicycle rack
If tr
ansport equipment, for example a trailer or
bicycle rack, is attached to the trailer hitch and
the electrical connection has been correctly
established:
= In drive program F and G, the vehicle
adopts the normal level starting from a speed
of 30 km/h.
= In all other drive programs, the vehicle
remains at normal level irrespective of speed.
System limits
AIRMATIC may not be available or have only limi-
ted availability in the following cases:
= The overheating protection has been activated
due to frequent level changes within a short
time. The Á warning lamp appears in the
multifunction display.
Aser the cooling phase, the system is again
available without restriction. Setting the vehicle level (vehicles with AIRMATIC) &
WARNING Risk of accident because v
ehi-
cle level is too high
Driving characteristics may be impaired.
The v
ehicle can dris outwards, for example,
when steering or cornering. 
Choose a vehicle level which is suited to
t

he driving style and the road surface
conditions. &
WARNING Risk of entr
apment from vehi-
cle lowering
When lowering the vehicle, other people could
become tr
apped if their limbs are between the
vehicle body and the tyres or underneath the
vehicle. 
Make sure no one is underneath the
v

ehicle or in the immediate vicinity of the
wheel arches when the vehicle is being
lowered. 288
Driving and parking

&
WARNING Risk of becoming tr apped due
to the vehicle lowering
Vehicles with AIRMATIC or level control: when
y
ou unload luggage or leave the vehicle, the
vehicle Nrst rises slightly and then returns to
the set level shortly aserwards.
You or anyone else in the vicinity of the wheel
arches or the underbody could thus become
trapped.
The vehicle can also be lowered aser being
locked. 
When leaving the vehicle, make sure that
nobody is in t
he vicinity of the wheel
arches or the underbody. *
NOTE Damag
e due to vehicle lowering Parts of the body could be damaged when the
v
ehicle is lowered. 
Make sure that there are no obstacles
suc
h as kerbs underneath or in the
immediate vicinity of the body when the
vehicle is being lowered. *
NOTE Mer
cedes-AMG vehicles 
Observe the notes in the Supplement.
Y
ou could otherwise fail to recognise
dangers. Requirements:
= The v

ehicle has been started.
= Vehicles without OM-road package: the vehicle
is not moving faster than 65 km/h.
= Vehicles with OM-road package:
- OM-road level +1: the vehicle is not moving
faster than 100 km/h.
- OM-road level +2: the vehicle is not moving
faster than 65 km/h.
- OM-road level +3: the vehicle is not moving
faster than 20 km/h and the rear fog lamp
is not switched on. Raising the vehicle (vehicles without
OM-r
oad
package) 
Push rocker switch 1 f
orwards.
Indicator lamp 2 Oashes while the vehicle is
being raised and lights up continuously when
it has Nnished rising. Driving and parking
289

Your selection is saved. The
oM-r oad level set
remains stored even aser the ignition has been
switched oM.
The vehicle is lowered again in the following situa-
tions:
= When driving faster than 80 km/h.
= When driving brieOy between 65 km/h and
80 km/h.
= Aser selecting a diMerent drive program using
the DYNAMIC SELECT switch.
The vehicle is adjusted to the height of the active
drive program.
Lowering the vehicle (vehicles without OM-road
package) 
Pull rocker switch 1.
The v
ehicle is adjusted to the height of the
active drive program.
Operation with a trailer or bicycle rack
If t
he electrical connection has been correctly
established to the trailer or bicycle rack:
= From approx. 30 km/h: oM-road level +1 can
be selected, regardless of drive program. =
F
rom approx. 30 km/h: the vehicle is adjusted
to normal level, regardless of drive program.
Raising the vehicle (vehicles with OM-road pack-
age) 
Push rocker switch 1 f
orwards.
= OM-road level +1: one indicator lamp 2
lights up continuously when the vehicle
has Nnished rising. =
OM-r
oad level +2: two indicator lamps 2
light up continuously when the vehicle has
Nnished rising.
= OM-road level +3: three indicator lamps 2
light up continuously when the vehicle has
Nnished rising.
Your selection is saved. The oM-r
oad level set
remains stored even aser the ignition has been
switched oM.
The vehicle is lowered again in the following situa-
tions: = OM-road level +3: when driving faster than
20 km/h or when the rear fog lamp is
switched on.
The vehicle is lowered to oM-road level +2.
= OM-road level +2:
- When driving faster than 80 km/h.
- When driving brieOy between 65 km/h and
80 km/h.
The vehicle is lowered to oM-road level +1.
= OM-road level +1: 290
Driving and parking

-
When dr iving faster than 115 km/h.
- When driving brieOy between 100 km/h
and 115 km/h.
The vehicle is lowered to the normal level.
= Aser selecting a diMerent drive program using
the DYNAMIC SELECT switch.
The vehicle is adjusted to the height of the
active drive program.
Lowering the vehicle (vehicles with OM-road pack-
age) 
Pull rocker switch 1.
= OM-r

oad level +3: the vehicle is lowered to
oM-road level +2. Two indicator lamps 2
light up continuously when the vehicle has
Nnished lowering.
= OM-road level +2: the vehicle is lowered to
oM-road level +1. One indicator lamp 2
lights up continuously when the vehicle
has Nnished lowering.
= OM-road level +1: the vehicle is lowered to
the normal level. No indicator lamp 2 lights up when the vehicle has
Nnished
lo
wering.
Your selection is saved. The oM-r
oad level set
remains stored even aser the ignition has been
switched oM.
Operation with a trailer or bicycle rack
If the electrical connection has been correctly
established to the trailer or bicycle rack:
= Up to approx. 20 km/h: oM-road levels +1, +2
and +3 can be selected, regardless of the
drive program.
= Up to approx. 30 km/h: oM-road levels +1 and
+2 can be selected, regardless of the drive
program.
= From approx. 30 km/h: the vehicle is adjusted
to normal level, regardless of the drive pro-
gram.
Setting the entering and exiting level (AIRMATIC)
Requirements: = The engine is running.
= The vehicle is moving at speeds below
30 km/h. Multimedia system:
4 © 5
Settings
5 Schnellzugriff (Quic

k access) 
Select Lower when entering On.
The v
ehicle is lowered to low level -2 to facili-
tate entering and exiting.
% The availability of this function depends on
t
he vehicle equipment.
% Further information on AIRMATIC
( pag

e 287).
Lowering and raising the rear of the vehicle &
WARNING Risk of entr
apment from vehi-
cle lowering
When lowering the vehicle, other people could
become tr
apped if their limbs are between the
vehicle body and the tyres or underneath the
vehicle. 
Make sure no one is underneath the
v

ehicle or in the immediate vicinity of the
wheel arches when the vehicle is being
lowered. Driving and parking
291

Requirements:
= all v
ehicle doors are closed
= there is no trailer coupled
= there is no bicycle rack Ntted
= the battery is suPciently charged (if neces-
sary, start the engine)
Lowering the rear of the vehicle 
Apply the electric parking brake. 
Shis t
he transmission to position
j( page 212). 
Pull switch 1 in t
he load compartment trim
brieOy.
Indicator lamp 2 Oashes until the vehicle has
been lowered.
The vehicle is lowered at the rear axle by
approx. 40 mm. When the vehicle has been
lowered, indicator lamp 2 remains lit.
Lowering is interrupted in the following situations:
= a v

ehicle door is opened.
= switch 1 is pulled again.
= the vehicle is being driven faster than 2 km/h.
% The vehicle is automatically set to the level of
t
he selected drive program if you drive at
speeds greater than 2 km/h.
If indicator lamp 2 Oashes twice and t
he rear of
the vehicle does not lower: 
Make sure that the requirements are met.
% Lowering the rear of the vehicle allows the
v
ehicle to be loaded more easily. Observe the notes on loading the vehicle when doing this
(  pag

e 127).
Raising the rear of the vehicle 
Check if the battery is suPcientl
y charged. If
necessary, start the engine. 
Pull switch 1 br
ieOy.
Indicator lamp 2 goes out.
The vehicle will be raised to the currently
selected level.
% The vehicle is automatically set to the level of
t
he selected drive program if you drive at
speeds greater than 2 km/h.
If the vehicle cannot be raised: 
Ensure that the battery is suPcientl
y charged;
if necessary, start the engine.
The raising process continues. 292
Driving and parking

E-ACTIVE BODY CONTROL
Function of E-ACTIVE BODY CONTROL
* NOTE Mercedes-AMG vehicles 
Observe the notes in the Supplement.
Y
ou could otherwise fail to recognise
dangers. E-ACTIVE BODY CONTROL is an electrohydraulic
suspension sy

stem with variable damping for
improved driving comfort. The all-round level con-
trol system ensures the best possible suspension
and constant ground clearance, even with a laden
vehicle. When driving at speed, the vehicle is low-
ered automatically to improve driving safety and
to reduce fuel consumption. The suspension set-
ting is adjusted depending on the road surface,
vehicle load and the drive program selected.
The ROAD SURFACE SCAN function detects areas
of unevenness in the road before you drive over
them by means of a multifunction camera. This
reduces chassis movements. The damping is adjusted individually to each
wheel and depends on t
he following factors:
= Driving style, e.g. sporty
= Road condition, e.g. bumps
= Drive program
E-ACTIVE BODY CONTROL is comprised of the fol-
lowing functions and components:
= Vehicles with Driving Assistance Package:
ROAD SURFACE SCAN
= Curve inclination function CURVE
= Recovery mode
= Individual wheel control
= Air suspension with automatic level control
= Speed-dependent lowering to reduce fuel con-
sumption
= Manual level adjustment
= ADS PLUS: Adaptive Damping System with
constant adjustment of damping characteris-
tics
= DYNAMIC SELECT switch and level button Suspension setting and vehicle level per drive pro-
g ram
Drive program C
= The suspension setting is Nrmer.
= The vehicle is set to Sport level.
= ROAD SURFACE SCAN is deactivated.
= The curve inclination function is deactivated.
Drive program B
= The suspension setting is even Nrmer.
= The vehicle is set to Sport + level.
= ROAD SURFACE SCAN is deactivated.
= The curve inclination function is active.
Drive program A
= The suspension setting is comfortable.
= The vehicle is set to the normal level.
= When driving at speeds above approximately
140 km/h, the vehicle is lowered.
= When driving at speeds below approximately
40 km/h, the vehicle is raised.
= ROAD SURFACE SCAN is active. Driving and parking
293

=
The cur ve inclination function is deactivated.
Drive program 1
= The suspension setting is comfortable.
= The vehicle is set to the normal level.
= When driving at speeds above approximately
140 km/h, the vehicle is lowered.
= When driving at speeds below approximately
40 km/h, the vehicle is raised again.
= ROAD SURFACE SCAN is active.
= The curve inclination function is active.
Drive program 
= The suspension setting is comfortable.
= The vehicle is set to the normal level.
= When driving at speeds above approximately
140 km/h, the vehicle is lowered.
= When driving at speeds below approximately
40 km/h, the vehicle is raised again.
= ROAD SURFACE SCAN is deactivated.
= The curve inclination function is deactivated. Drive program
F
= The suspension se
tting is suitable for easily
negotiable oM-road terrain.
= The vehicle is set to oM-road level +1.
= ROAD SURFACE SCAN is deactivated.
= The curve inclination function is deactivated.
= When the necessary conditions are met,
recovery mode and individual wheel control
can be activated.
= Vehicles without OM-road package:
- When driving at speeds above approx-
imately 80 km/h the vehicle is lowered.
- When driving at speeds below approx-
imately 45 km/h, the vehicle is raised.
= Vehicles with OM-road package:
- When driving at speeds above approx-
imately 115 km/h, the vehicle is lowered.
- When driving at speeds below approx-
imately 75 km/h, the vehicle is raised. Drive program
G
= The suspension se
tting is suitable for diPcult
oM-road terrain.
= The vehicle is set to oM-road level +1.
= When driving at speeds above approximately
80 km/h, the vehicle is lowered.
= When driving at speeds below approximately
45 km/h, the vehicle is raised.
= ROAD SURFACE SCAN is deactivated.
= The curve inclination function is deactivated.
= Recovery mode or individual wheel control can
be activated.
Drive program = You can call up individual suspension settings
here.
Operation with a trailer or bicycle rack
If the electrical connection has been correctly
established to the trailer or bicycle rack:
= Drive program A, , 1, , C
and B: the vehicle remains at normal level
irrespective of speed. 294
Driving and parking

=
The cur ve inclination function is deactivated.
= Drive program F and G: the vehicle
adopts the normal level starting from a speed
of 30 km/h.
Level diMerences compared to the normal level
Vehicles without OM-road package
= Car wash: +90 mm ( page 396)
= OM-road level +1: +60 mm
= Sport: approx. -15 mm
= Sport +: approx. -25 mm
Vehicles with OM-road package
= Car wash: approx. +90 mm(  page 396)
= OM-road level +3: +90 mm
= OM-road level +2: +60 mm
= OM-road level +1: +30 mm
= Sport: approx. -15 mm
= Sport +: approx. -25 mm
If the entry/exit level function is activated, the
vehicle is lowered to the Sport + level to facilitate
entering/exiting the vehicle. When driving at speeds of approximately 30 km/h or above, the
entr y/exit level is deactivated and the vehicle is
raised (  page 291).
Function of ROAD SURFACE SCAN % This function is not available in all countries.
The ROAD SURFACE SCAN function monitors the
r
oad in front of your vehicle using a multifunction
camera (  page 250). ROAD SURFACE SCAN
detects unevenness in the road surface, e.g.
bumps, before the vehicle drives over them. Chas-
sis movements are reduced and driving comfort is
increased.
ROAD SURFACE SCAN is automatically activated
if the following conditions are met:
= Drive program A or 1 is selected.
= The vehicle is set to the normal level.
= You are driving at a speed between 7 km/h
and 180 km/h. System limits
R

OAD SURFACE SCAN can be impaired in the fol-
lowing situations or can stop functioning:
= If the carriageway is insuPciently lit, e.g. at
night.
= In snow, rain, fog, heavy spray, if there is glare,
in direct sunlight or in greatly varying light
conditions.
= If the windscreen in the area of multifunction
camera is dirty, misted up, damaged or cov-
ered.
= If the road surface has no optic structure or
reOects light.
= If you are driving too close to the vehicle in
front.
= If sections of the route have a very small
radius of curvature.
= During abrupt driving manoeuvres, e.g. heavy
braking or sudden acceleration.
Observe the notes on cleaning the multifunction
camera (  page 399). Driving and parking
295

Function of recovery mode
&
WARNING Risk of injur y due to the vehicle
moving up and down
During recovery mode, the vehicle moves up
and do
wn and can cause injuries. 
When activating recovery mode, make
cer

tain that no one is in the vicinity of
the vehicle. *
NOTE Risk of damag
e due to the vehicle
moving up and down When free driving mode is activated, the vehi-
cle mo

ves up and down. Vehicle parts may be
damaged if the underbody bottoms out. 
Make sure that there is suPcient g
round
clearance when rocking free mode is
activated. Recovery mode is a function of the suspension
whic

h can assist the driver on loose surfaces (e.g.
sand, snow) when freeing a vehicle which has
become stuck. The vehicle body rocks in slow, vertical motions
when r
ecovery mode has been activated. This
temporarily puts the wheels under greater load,
which means they have increased traction and the
vehicle is freed.
You can activate free driving mode via OM-road
Assist ( page 299).
Function of individual wheel control &
WARNING Risk of becoming tr
apped due
to the vehicle lowering
The vehicle can be lowered when the individ-
ual wheel contr
ol function has been activated.
Body parts could become trapped if they are
between the vehicle body and the tyres or
underneath the vehicle. 
Make sure that nobody is under the vehi-
cle or in t
he immediate vicinity of the
wheel arches when individual wheel con-
trol is activated. *
NOTE Risk of damag
e due to the vehicle
moving up and down The vehicle can be lowered or raised on one
or mor
e wheels when the individual wheel
control function has been activated. Vehicle
parts could be damaged due to contact with
objects. 
Make sure that the vehicle has suPcient
r
oom to move when the individual wheel
control function has been activated. Individual wheel control is a function of the sus-
pension, whic
h can be used to set the vehicle
level for each wheel individually. This can help to
improve alignment of the body when driving oM-
road.
You can activate individual wheel control via OM-
road Assist (  page 299). 296
Driving and parking

Adjusting the vehicle level (vehicles with E-ACTIVE
BOD
Y CONTROL) &
WARNING Risk of accident because v
ehi-
cle level is too high
Driving characteristics may be impaired.
The v
ehicle can dris outwards, for example,
when steering or cornering. 
Choose a vehicle level which is suited to
t

he driving style and the road surface
conditions. &
WARNING Risk of entr
apment from vehi-
cle lowering
When lowering the vehicle, other people could
become tr
apped if their limbs are between the
vehicle body and the tyres or underneath the
vehicle. 
Make sure no one is underneath the
v

ehicle or in the immediate vicinity of the
wheel arches when the vehicle is being
lowered. &
WARNING Risk of becoming tr
apped due
to the vehicle lowering
Vehicles with AIRMATIC or level control: when
y
ou unload luggage or leave the vehicle, the
vehicle Nrst rises slightly and then returns to
the set level shortly aserwards.
You or anyone else in the vicinity of the wheel
arches or the underbody could thus become
trapped.
The vehicle can also be lowered aser being
locked. 
When leaving the vehicle, make sure that
nobody is in t
he vicinity of the wheel
arches or the underbody. Requirements:
= The v

ehicle has been started.
= Vehicles without OM-road package: the vehicle
is being driven no faster than 65 km/h.
= Vehicles with OM-road package:
- OM-road level +1: the vehicle is not moving
faster than 100 km/h. -
OM-r
oad level +2: the vehicle is not moving
faster than 65 km/h.
- OM-road level +3: the vehicle is not moving
faster than 20 km/h.
Raising the vehicle (vehicles without OM-road
package) Driving and parking
297