MERCEDES-BENZ GLS SUV 2022 Owner's Guide

ing approval from the Communica-tions Ministry,
because of concer n about wireless interference.
For the United Kingdom only: The following information applies to all wireless
com

ponents of the vehicle and of the information
systems and communication devices integrated in
the vehicle:
The manufacturers of the radio components
declare that all radio equipment installed in the
vehicle is in compliance with the relevant statu-
tory requirements. The full texts of the declara-
tions of conformity are available at the following
web address:
https://moba.i.daimler.com/markets/ece-row/
baix/cars/certiNcates-of-conformity/en@GB/
index.html For Brazil only:
Note on two-way radio systems in the vehicle:These systems are not protected against harmful
int

erference and must not cause interference in
properly approved systems.
For Jamaica only:
All wireless vehicle components have received
type approval from the SMA.
For Nigeria only: Connection and use of the radio communications
eq
uipment in this vehicle is permitted by the
Nigerian Communications Commission 28
General notes

For Russia only:
The manufacturers of the wireless components
ins
talled in the vehicle hereby declare that all wireless components installed in the vehicle com-
pl
y with the technical regulations for two-way
radios. You can obtain further information from a
Mercedes-Benz service centre.
For Ukraine only: The manufacturers of the wireless components
ins

talled in the vehicle hereby declare that the
wireless components installed in the vehicle com- ply with the technical regulations for two-way
r
adios. You can obtain further information from a
Mercedes-Benz service centre.
Type of wireless applications and speciNcations in
accordance with 2014/53/EU
Besides the typical frequencies for mobile com-
munication cars by Mercedes-Benz make use of
the following automotive radio applications.
Type of wireless applications and speciNcations in accor
dance with 2014/53/EUTechnology
Frequency rangeTransmission output/magnetic Neld s
trength
Remote Keyless Entry 20 kHz (9!

Technology
Frequency rangeTransmission output/magnetic Neld s trength
Wireless Power Transmission 127 kHz (119!

Technology
Frequency rangeTransmission output/magnetic Neld s trength
Carsharing Module NFC:
13.553!

Technology
Frequency rangeTransmission output/magnetic Neld s trength
RAMSES (Router And Mobile SErviceS) GSM (E-GSM 850 / E-GSM 900, Class 4)
GSM (E-GSM 1800 / E-GSM 1900, Class 4)< +32.5 dBm (±1 dB)
< +29.5 dBm (±1 dB)
UMTS (WCDMA FDD I, II, III, IV, V, VIII, XIX, Class
3) < +23.5 dBm (±1 dB)
LTE (FDD B1, B2, B3, B4, B5, B7, B8, B9, B18,
B19, B21, B28, Class 3) < +23 dBm (±1 dB)
LTE (TDD B38, B40, B41, Class 3) < +23 dBm (±1 dB)
GNSS (1559!

Information about the
speciNc absor ption rateVehicle components
SAR value in W/kgApplicable limit value
Compensator ECE DE003 & ECE DE004 < 0.2 W/kg 2 W/kg
DAI RSE 1.8 W/kg2 W/kg
HERMES communication module < 0.4 W/kg2 W/kg General notes
33

Vehicle components
SAR value in W/kgApplicable limit value
RAMSES communication module 0.036 W/kg2 W/kg
NRCS2P 0.003 W/kg2 W/kg
NTG6 0.199 W/kg4 W/kg
NTG7 0.08 W/kg2 W/kg
NTG7RSU 0.07 W/kg2 W/kg
Tablet PC SM-T230NZ 0.7 W/kg4 W/kg
Radio data transmission telephone system 0.24 W/kg 2 W/kgImporter information for wireless components
For Moldova only:
Im
porter
S.C. GRAND PREMIUM S.R.L. Moldova
mun. Chisinau, str. Hîncesti sos., 2/2
For Turkey only:
Importer
Mercedes Benz Otomotiv Ticaret ve Hizmetler
A. =. Genel Merkez Ak

Milton Keynes, MK15 8BA
England
Jack
Copy and translation of the original declaration of
conf
ormity:
EC declaration of conformity
1.
The undersigned, representing
Manufacturer:
BRANO a.s.
747 41 Hradec nad Moravicí, Opavsk

Product designation: Daimler electric air pump
Model designation: 0867, D
T/UW 200056
MB part no.: A 000 583 5101
complies with the following relevant regulations:
2004/108/EC
Applied harmonised standards, in particular:
DIN EN 55014-1: 2012
DIN EN 55014-2: 2016
Manufacturer: Dunlop Tech GmbH
Address: OMenbacher Landstr. 8, 63456 Hanau
Authorised representative: IMS dept.
Date: October 2019
Signature: IMS-AE, IMS-AE-L Diagnostics connection
The diagnos
tics connection is a technical inter-
face in the vehicle. It is used, for example, during
repair and maintenance work or for reading out
vehicle data in a specialist workshop. Diagnostic
devices should therefore only be connected in a
qualiNed specialist workshop. &
WARNING Risk of accident due t
o con-
necting devices to the diagnostics con-
nection
If you connect devices to the diagnostics con-
nection of t
he vehicle, the function of vehicle
systems and operating safety may be
impaired. 
For safety reasons, we recommend that
y

ou only use and connect products
approved by a Mercedes-Benz service
centre. &
WARNING Risk of accident due t
o objects
in the driver&#39;s footwell
Objects in the driver&#39;s footwell may impede
pedal tr
avel or block a depressed pedal.
This jeopardises the operating and road safety
of the vehicle. 
Stow all objects in the vehicle securely
so t
hat they cannot get into the driver&#39;s
footwell. 
Always Nt t
he Ooor mats securely and as
prescribed in order to ensure that there
is always suPcient room for the pedals. 
Do not use loose Ooor mats and do no
t
place Ooor mats on top of one another. *
NOTE Batt
ery discharging from using devi-
ces connected to the diagnostics connec-
tion Using devices at the diagnostics connection
dr
ains the battery. 
Check the charge level of the battery. 
If the charge level is low, charge the bat-
t
ery, e.g. by driving a considerable dis-
tance. Please also note the information about the 12 V
batt

ery and short-distance trips in the &#34;Driving
and Parking&#34; chapter ( page 197). 36
General notes

Connecting and using another device with the
diagnos tics connection can have the following
eMects:
= Malfunctions in the vehicle system
= Permanent damage to vehicle components
Please refer to the warranty terms and conditions
for this matter. Moreover, connecting equipment to the diagnos-
tics connection can lead t
o emissions monitoring
information being reset, for example. This may
lead to the vehicle failing to meet the require-
ments of the next emissions inspection during the
main inspection. QualiNed
specialis
t workshop
A qualiNed specialist workshop has the necessary
special skills, tools and qualiNcations to correctly
carry out any necessary work on your vehicle.
This particularly applies to safety-relevant work.
Always have the following work carried out on
your vehicle at a qualiNed specialist workshop:
= Safety-relevant work
= Service and maintenance work
= Repair work
= ModiNcations as well as installations and con-
versions
= Work on electronic components =
V
ehicles with 48 V on-board electrical system:
work on the high-voltage component of the 48
V on-board electrical system
Mercedes!