navigation system MERCEDES-BENZ M-Class 2003 W163 Comand Manual

56 Audio
CD operation
MCS with single CD player*
CD operation begins:

Automatically, by inserting a CD
(
page 51)
The playback starts at Track 1.

By pressing when a CD is already
inserted in the CD slot, playback starts
at Track 1.
The telephone functions can be used while
a CD is playing.
To stop CD playback
Eject the CD, switch to the radio or
tape mode, or switch off the MCS.MCS with CD changer*
CD changer operation begins:

Press when CDs are inserted in
the CD changer (
page 52).
The playback starts at Track 1 of the
first CD.
The telephone and navigation functions
can be used while a CD is playing.
To stop CD playback
Switch to the radio or tape mode or
switch off the MCS.
Switching CD operation on and off
i
The navigation functions can be used
while a CD is playing in the CD-changer.
MCS with navigation system:
Navigation is only possible when a nav-
igation DVD is inserted in the single CD
player.

72 Telephone
Telephone operation
Press .
The menu to enter the unlock code ap-
pears.
Entering the unlock code
Use the number keys through
to enter the unlock code.
Asterisks instead of digits will appear in
the input line.If the code entered is correct and the
phone is registered in a network, the
phone is ready for use.If the telephone is ready for operation,
“READY” appears. The graphic (left) de-
picts strong signal reception. If you are not
in a home network, the roaming indicator
“R” is shown.
Switch to an audio mode, navigation
mode*.
Allow the telephone to switch to sleep
mode.
or
Switch off the MCS system.
Switching telephone operation on
i
Timeport phones use a three-digit code.
V60 phones use a four-digit code. The
head unit unlocks the phone using the
first three digits of the four-digit V60
unlock code.
Your unlock code prevents unautho-
rized persons from using your tele-
phone. Be sure to memorize this code
carefully.
If you enter an incorrect code, the sys-
tem returns to the menu for entering
the unlock code.
You must always enter the unlock code
when you switch on the telephone in
locked mode.
Switching telephone operation off

83 Navigation
Important notes
Travelling abroad
If you intend to travel through different re-
gions or abroad, you will need the respec-
tive navigation DVD.
Contact your Mercedes-Benz Center or
the Client Assistance Center at
1-800-FOR-MERCedes (1-800-367-6372)
for available DVDs.
Change the navigation DVD
(
page 86).
i
The CD/DVD drive can read navigation
DVDs and playback audio CDs.
If an audio CD is inserted in the CD/
DVD drive and is pressed, the
message “MUSIC CD INSERTED
PLEASE REPLACE WITH A NAV-
IGATION DISC” is displayed.

Remove the audio CD and insert a
navigation DVD (
page 86).
!
GPS (Global Positioning System) sig-
nals received make it possible to de-
termine the current vehicle position.
Deviations from the actual position
may occur

If the reception of GPS signals is
disturbed, e.g. in parking garages
and tunnels

If road conditions are poor

If your vehicle has been damaged
The MCS may require some time to
find its exact position after your vehi-
cle has been transported by car, train,
or ferry. Moving the vehicle a few yards
is typically enough to remedy this situ-
ation.

85 Navigation
Quick reference
FunctionPage
1Color display
2Delete the last input, re-
turn to previous screen
3Press to:
Open and close the con-
trol panel
The CD/DVD slot and
button are located
behind the control panel.
86
4Press to:
Switch the MCS on and
off
Turn to:
Set the volume differ-
ence between an audio
source and navigation
voice during an an-
nouncement
14
16
FunctionPage
5Entering address num-
bers
6Altering the map scale
7Pushing Joystick:
Moves cursor
Pressing :
Confirm selection
8Switching the navigation
system on
Activating the navigation
menu90
9Repeating current (last)
voice instruction
10Altering the map scale114
FunctionPage
11Softkeys for:
“DETR”: Detour
“STOP”: Cancels the
current destination,
“LIST”: Lists the ma-
neuver
“MUTE”: Mutes the voice
instructions
“LGHT”: Changes be-
tween light and dark
mode
“MAP”: Changes be-
tween map screen and
maneuver screen, re-
turning to the map
To activate the softkey
functions, press any soft-
key
119
115
113
114
140

89 Navigation
Destination input
FunctionPage
1Main navigation menu
2Setup Select menu
3Display Setup menu
4Guidance Setup menu
5Clock Adjustment menu143
6Language/Unit menu142
7System Information
menu140
8Route Select menu
9Avoid Road menu117
FunctionPage
10Change Current Method
menu115
11Delete Stopover menu
12Map screen
13Edit Select menu
14Edit Today’s Plan menu127
15Edit Address Book menu124
16Edit Previous Destina-
tions menu129
17Save Current Position in
Previous Destinations
menu128
FunctionPage
18Find Destination by
menu
19Today’s Plan menu125
20Address Book menu106
21Previous Destination
menu107
22Phone Number menu104
23Point of Interest menu100
24Intersection menu96
25Address menu92

90 Navigation
Destination input
Press .
The navigation start up screen only ap-
pears during the software loading pro-
cess.
After the navigation system boots up, the
disclaimer screen appears.
To accept the statements, press .
The display that appears is dependent
on the last navigation function used.Depending on the last system mode, MCS
calls one of the following displays:
If route guidance has been switched off

The main destination input menu
If route guidance has been switched on

The symbol display with an arrow
indicating your driving direction
or

The map with the symbol of current
vehicle location
or

The location map.
Switching the navigation system on
P82.85-9581-31
P82.85-9582-31

91 Navigation
Destination input
Changing over to another system, e.g. radio
Press to switch to radio opera-
tion.
The navigation system continues to run
in the background.
If you switch off the MCS, the naviga-
tion and audio system also switch off.You can search for a destination by:

Address (page 92)

Intersection (page 96)

Point of interest (page 100)

Phone number (page 104)

Recalling stored destinations from your
address book (
page 106)

Selecting previous destinations
(
page 107)

Selecting the destination directly from
the map (
page 108)

Today’s plan (page 125)
!
Potential fault messages during naviga-
tion start up:

“MUSIC CD INSERTED PLEASE
REPLACE WITH A NAVIGA-
TION CD”.
Eject the inserted CD and insert a
navigation DVD.

“Please insert DVD-ROM”.
Insert a navigation DVD.

“Error reading DVD-ROM.
Please check the disk”.
Check the DVD for damages like
scratches. Replace DVD.
If the error has been eliminated, you will
see the navigation start up screen.
Entering destination address

112 Navigation
Route guidance
Route guidance
After you select the destination and the
route is calculated, the navigation system
uses both pictorial displays and voice
prompts to guide you to the destination.
When the route is calculated, the display
switches to the map mode or to the ma-
neuver screen.The system announces “Proceed to the
highlighted Route” and the display shows
“Please Proceed”. The route is now in
progress.
While the system is guiding you on your
route, you can be manually change the dis-
play between modes. The Guidance Dis-
play mode shows an arrow indicating the
next maneuver.
Press the joystick to the right to preview
the next maneuver. Press the joystick to
the left to return to the current maneuver.
i
After entering the destination, you can
change to an audio source. If you have
selected the Hybrid or Arrow mode
(
page 131), the Guidance Display
comes up when a maneuver is started.
The voice instructions are announced
simultaneously.

114 Navigation
Route guidance
If you programmed the address and name,
they are displayed when you reach your
final destination.Muting voice instructions
Activate the softkeys by pressing any
softkey. Press the softkey “MUTE.”
to mute the voice instructions. The softkey
“MUTE” is highlighted.
To cancel the mute function, press the
highlighted softkey “MUTE”.
If you press , the system gives the
current voice instruction even when
“MUTE” is switched on.Altering the map scale
You can increase or decrease the level of
detail in the map mode.
Press to zoom in (increase detail)
Press to zoom out (decrease de-
tail).

115 Navigation
Route guidance
Adding a stopover to the route
Whenever a destination is set and calculat-
ed, the system allows you to create a stop-
over along the way.
Start route guidance.
Enter a desired stopover destination.
In the Confirm Destination menu, se-
lect “Add as Stopover to
Route” and press .
The desired destination is added to the
route.Cancelling the current destination
To activate the softkeys, press any
softkey.
Press the softkey “STOP”.
A window appears confirming the stop
request.
If you wish to delete the current desti-
nation, use the joystick to select “YES”
and press .
The current destination is cancelled.
or
If you don’t wish to continue:

Use the joystick to select “NO”
and press

Press .

Wait 10 seconds
The stop request is cancelled.Changing the route calculation mode dur-
ing guidance

Press .

Use the joystick to select “ROUTE
FUNCTIONS” and press .
The Route Select menu appears.
P82.85-9670-31
P82.85-9566-31