mileage MERCEDES-BENZ ML320 1997 Complete User Guide

The remaining distance is displayed with a resolution of 100 km.
If a speed limit is set at the cruise control, the speed limit appears for a short moment in the display before
the ASSYST text.
In the normal case, it is the remaining distance which is displayed. However, the time information is always
processed in the background to enable the attention of "low-mileage drivers" to be drawn to any service due.
The remaining distance is compared each day with the remaining time. In certain circumstances, the display
switches over, and it is the remaining time which is displayed ( see document "Remaining time").
If certain measured values are not supplied to the ASSYST system, e.g. because of failure of a sensor, it
switches over to stored substitute values. A corresponding entry is made in the fault memory of the relevant
control module.
The data are retained if the operating voltage is disconnected or fails.
REMAINING TIME FUNCTION - GF00.20-P-2008A
Active service system
(ASSYST) operating
informationEngines with oil sensor
(e.g. 112, 113, 611)GF00.20-P-0003-01A
Model 210 as of 01.03.97
with engines 111, 602,
604, 605, 606
Model 129, 140, 170, 202
as of 06.97 except engine
112, 113, 611
(Valid for engines with
oil level switch.)GF00.20-P-0003-01B
Active service system
(ASSYST) display
facilities GF00.20-P-0003-04A
Remaining time function GF00.20-P-2008A
Engine oil monitor
functionEngines with oil sensor
(e.g. 112, 113, 611)GF00.20-P-2009A
Model 210 as of 01.03.97
with engines 111, 602,
604, 605, 606
Model 129, 140, 170, 202
as of 06.97 except engine
112, 113, 611
(Valid for engines with
oil level switch.)GF00.20-P-2009B
Displaying service
functionModel 129, 202 as of 8.99
Model 163 as of 1.00
Model 168 as of 9.99
Model 170 as of 12.99GF00.20-P-2010B

2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Saturday, October 02, 2010 3:47:47 PMPage 206 © 2006 Mitchell Repair Information Company, LLC.

MODEL 129 as of 1.6.97
MODEL 140 as of 1.6.97
MODEL 163
MODEL 168
MODEL 170 as of 1.6.97
MODEL 202 as of 1.6.97
MODEL 208 up to 31.7.99
MODEL 210 as of 1.3.97 up to 30.6.99
Start time and remaining time
Start time refers to the service interval in days immediately after the oil change
The start time is not dependent on the driving conditions and any oil replenishments .
The start time is 730 days ( 365 days).
The start time is automatically reset to its initial value by the oil change reset after each oil change. The start
time is an internal computed variable and cannotbe displayed in the instrument cluster. It is possible to display
the start time with the HHT.
The remaining time is displayed in the instrument cluster under certain conditions as stated below.
The remaining time is the time which remains until the next service.
The remaining time is only of importance for "low-mileage drivers". (It is therefore the remaining distance
which is displayed as a general rule.)
The remaining time depends on:
the start time
the driving conditions (the distance driven is weighted in this case.)
Replenishing oil, however, does not have any influence on the remaining time.
As a result of these dependent factors, ASSYST proves to be a demand-oriented system even for "low-mileage
drivers". Depending on the weighting of the factors, the service interval for "low-mileage drivers" is between 1
and 2
years.

2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Saturday, October 02, 2010 3:47:47 PMPage 207 © 2006 Mitchell Repair Information Company, LLC.

15W-50Technology Centre,
Reading/England
Castrol GTX 2
15W-40 X Lubricants UK Ltd,
Technology Centre,
Reading/England
Castrol GTX 3 X XXX Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX 3
15W-40 X Lubricants UK Ltd,
Technology Centre,
Reading/England
Castrol GTX 3
Professional X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX 3
Protection X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX 5
Lightec X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX 5
Magnatec X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX
High Mileage X Lubricants UK Ltd,
Technology Centre,
Reading/England
Castrol GTX
Magnatec 10W-
40 X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX
Magnatec 15W-
40 X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX
Performance X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX
Performance
Plus X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX
Powertec X Castrol Limited, GB
Reading RG8 7QR,
England
Castrol GTX
Powertec 7 Way X Lubricants UK Ltd,
Technology Centre,
Reading/England
Castrol GTX XX XXX Castrol Limited, GB

2004 Mercedes-Benz ML350
1998-2005 GENINFO Overall vehicle - 163 Chassis
me
Saturday, October 02, 2010 3:47:54 PMPage 466 © 2006 Mitchell Repair Information Company, LLC.

GF54.30-P-2016A
Trip computer interface, location/task
7.7.99

MODEL
129, 140 as of 1.6.96

The trip computer receives the following information via the trip

computer interface (2 lines):
D
Driving speed

D
Mileage

D
Time

-----------------------------------------------------------------------------------------


The trip computer receives information about fuel consumption

directly from the fuel level sensor.

-----------------------------------------------------------------------------------------

Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AD54.30-P-5000-02A
Display instruments controlled via CAN

troubleshooting chart IC

The following display instruments or indicator lamps/ malfunction

indicator lamps receive their information from the traction system

control module (N47) via CAN data buses (an appropriate message

appears in the display on vehicles with multi-function display):

D
Total mileage recorder, trip odometer

D
Electronic speedometer

D
Low brake fluid level/parking brake indicator lamp (except model 163

parking brake indicator lamp only via CAN)

D
Brake pad wear indicator lamp

D
ABS MIL

D
ETS, ASR, ESP indicator lamp

D
ETS, ASR, ESP malfunction indicator lamp

Model 163 only:

The
"Low-Range"
indicator lamp receives its information from the

transfer case control module (N78) via CAN data buses.

The
"Fog lamps"
indicator lamp (only model 163 except

I
) receives

its information from the All-activity module (AAM, N10) via CAN data

buses.

Model 168 only:

The
" Gear indicator "
indicator lamp receives its information from the

gear recognition module (A61) or from automatic clutch control module

(N15/4) via CAN data buses.
The following display instruments or indicator lamps/

malfunction indicator lamps receive their information from the

injection system control module (N3) via CAN data buses (an

appropriate message appears in the display on vehicles with

multi-function display):

D
Tachometer

D
Low engine oil level lamp

D
Engine coolant temperature

D
Preglow indicator lamp (diesel only)

D
Vehicle speed warning

D
Vehicle speed limit warning

D
Severe leak warning (

I
only), the fuel reserve indicator lamp

(A1e4) flashes

D
Active Service System (ASSYST):

D
Oil condition

D
Oil level

D
Oil temperature

D
Mass volumetric efficiency (load moment)

D
Engine speed, engine coolant temperature

Copyright DaimlerChrysler AG 05.06.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1