fog light MERCEDES-BENZ ML430 1997 Complete Owner's Guide

AP82.10-P-8260-04A
Set or inspect fog lamps

P82.10-0205-01

1
The light-dark boundary must be as horizontal as possible at the height of the appropriate
dividing line (4), correct if necessary.

2
For model 140 sedan as of approx. 03.94, 168 and 202: Check seat of bulb.

P82.10-3633-01

Model 163.113 /154 #A as of 289565,

163.113 #X as of 754620,

163.128 /154 /157 /175 except CODE (U49) Styling package

Arrow:
Position of adjusting screw

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1

AP82.10-P-8260GH
Check and correct headlamp adjustment
2.7.97

MODEL
163

a=Marking for low beams

b=Marking for high beams

c=Marking for fog lamps

P82.10-0212-02


Check

1
Drive vehicle to level surface
The vehicle level must not change when the

brakes are applied.

Vehicle must be in ready-for-the-road

condition (unladen weight, fuel tank full or

proper additional weight).

Correctly adjust tire pressure.

Load driver's seat with 75 kg or a person

(except USA)

2
Align headlamp adjustment tester to vehicle

and adjust height according to marking in lens

Follow the operating instructions for

headlamp beam setting equipment exactly

*WH58.30-Z-1002-09A


Danger!

Risk of accident
from vehicle starting off by

itself when engine running.
Risk of injury


suffered in the form of bruises or burns to the

hands when reaching in while the engine

cranks or runs
Secure vehicle to prevent it from moving off

by itself.

Wear closed and close-fitting work clothes.

Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

3
Run engine and switch on low beam

4
Check headlamp range control for proper

function
(except USA)


The light beams from both headlamps should

change uniformly

5
Set headlamp range control switch to position 0

6
Check low beams
Adjust if necessary (except USA)

AP82.10-P-8260-01A


Due to the common reflector unit, the low

beams, high beams and fog lamps are

adjusted simultaneously.

US version:
#

See "Owner's Manual"

7
Check high beam adjustment

AP82.10-P-8260-02A

8
Check fog lamps

AP82.10-P-8260-04A

Commercially available tools
(see Workshop Equipment Manual)

Number

Designation
Make (e.g.)
Order number

Copyright DaimlerChrysler AG 20.05.2006 CD-Ausgabe G/10/04 . This WIS print-out will not be recorde
d by Modification services.
Page 1