MERCEDES-BENZ S-Class 2004 W220 Comand Manual

122 NavigationDestination inputAccepting the displayed destination 
In the Destination Entry menu, press
E longer than 2 seconds.
or

Select the ( symbol. Press H, h,
g, G to do so.

Press E.
Entering another destination address

Press h, H, g and G to select
the characters. After each selection,
press E.
Press F and f to select characters
diagonally.
or

Press one of the number keys 2 to
9 as often as needed.

Press the
Delete
soft key if
necessary.
The character last entered or the
character last accepted by the system
is deleted.
iYou can only select admissible
characters. The character selected
appears magnified. If your input is
unambiguous, the system will
complete it.iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the cities stored on the
navigation DVD. The character
selected appears magnified. The
system will accept the entry if the input
matches the name of a city stored on
the navigation DVD.

123 Navigation
Destination input

Press E longer than 2 seconds to
confirm.
or

Select the ( symbol. Press H, h,
g, G to do so.

Press E.
The city list will appear. You can now
accept the city entered or select
another.Selecting a city

Use g or G to select the desired
city.

Press E.
After you have selected a city one of
the following menus will appear: 
For larger cities with more than 15
streets: Enter Street input menu
(page 125).

For smaller cities with up to 15
streets: Select Street menu
(page 126)

If no streets are available for the
selected city, or if a street extends
through several city centers:
Select CityCtr menu (
page 124)
iDo not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).
iIn some cases, the system may
distinguish cities of the same name by
area selection (
page 124).
iPressing the
Back
soft key will abort
the selection process.
iIf several options of a city are available,
another menu will appear where you
must make and confirm your desired
selection.

124 NavigationDestination inputSelecting the area of the destination
Towns of the same name are distinguished
by the area in which they are located. After
you have entered the place, a list of areas
may appear. The status bar indicates the
number of areas available, for example: Town
found
[number]
.

Press G or g to select an area.

Press E.

You can now enter a street
(page 125).Selecting a city center
After you have entered the city, you can
select a center (district).

Press the
CityCtr
soft key.

Press g or G to select a center.

Press E.
The Route Guidance menu will appear
(page 134).In addition to the center selection you can
use the following soft keys to determine
your destination:

Map
soft key:
Brings you to the destination input
directly above the map (
page 131).

POIs
soft key:
Entering Points of Interest
(
page 155).

125 Navigation
Destination input
Entering a street
The system will display one of the following
menus after you have entered the city:
In the case of cities with more than 15
streets: Enter Street menu
(page 125).

In the case of cities with up to 15
streets: Select Street menu
(page 126)

If no streets are available for the
destination: Select CityCtr list
(page 124)
The respective menu is indicated on the
status bar.
In addition to the street selection, you can
use the following soft keys to determine
your destination:

Map
soft key:
Brings you to the destination input
directly above the map (
page 131).

CityCtr
soft key:
Brings you to the district (center)
selection (page 124).

POIs
soft key:
Brings you to the Points of Interest
selection menu (
page 155).

Press h, H, g and G to select
the characters. After each selection,
press E.
Press F and f to select characters
diagonally.
or

Press one of the number keys 2 to
9 as often as needed.

Press the
Delete
soft key if
necessary.
The character last entered or the
character last accepted by the system
is deleted.
iFor quicker input, COMAND offers
available characters from the character
set based on your selections and the
names of the streets stored on the
navigation DVD. The character
selected appears magnified. The
system will accept the entry if the input
matches the name of a street stored on
the navigation DVD. iDo not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).

126 NavigationDestination input
Press E longer than 2 seconds to
confirm.
or

Select the ( symbol. Press H, h,
g, G to do so.

Press E.
The street list will appear. You can now
select a street.Selecting a street

Use g or G to select a street.

Press E.
The menu for starting the route
guidance function with the destination
data you have entered is displayed.The following soft keys are available to
further define your destination:

Map
soft key:
Brings you to the destination input
directly above the map (
page 131).

Intrsct.
soft key:
You can select an intersection for the
destination street (
page 127).

Hse No.
soft key:
Brings you to the destination street
house number input (
page 128).

127 Navigation
Destination input

Mode
soft key:
Brings you to the
Change
mode

selection menu (
page 116).

POIs
soft key:
Brings you to the Points of Interest
(POI) menu (
page 156).

Parking
soft key:
Brings you to the menu for inputting a
parking near the destination street
(
page 130).

Save
soft key:
You can enter your destination into the
Destination memory (
page 151).Entering an intersection
After you have entered a destination street
(
page 125) you can select an
intersection to that street.

Press the
Intrsct.
soft key.The system will display one of the following
menus:

In the case of streets with more than
15 intersections: Enter Intersection
menu.

Enter the name as specified in
“Entering a street” (
page 125).

Press the
List
soft key.
The Select Intersection menu will
appear. It displays a list of roads
intersecting with the previously input
intersection.

Select an intersection (
page 128).
iYou can select either an intersection or
the house number. You cannot enter
both.
iThe
Intrsct.
soft key is only
available if appropriate streets are
saved on the navigation DVD.

128 NavigationDestination input
In the case of streets with up to 15
intersections: Select Intersection
menu 
Press g or G to select an
intersection.

Press E.
The Start Route Guidance menu will
appear (
page 134).
Entering a house number
A house number can be entered after
entering the destination street
(
page 125).

Press the
Hse No.
soft key.
Either the menu for entering a house
number or a list of house numbers to
select from will appear (
page 129).

Press h, H, g and G to select
the numbers. After each selection,
press E.

Press F and f to select numbers
diagonally.
or

Press the appropriate number keys
0, 1 to 9.
iYou can enter an intersection instead
of the house number. You cannot enter
both.
iThe
Hse No.
soft key is only available
if appropriate streets are stored on the
navigation DVD.

129 Navigation
Destination input

Press the
Delete
soft key if
necessary.
The number last entered is deleted.

Press E longer than 2 seconds to
confirm.
The Start Route Guidance menu
(page 134) or a list for selecting a
the house number area will appear.Selecting a House Number Area

Press g or G to select the desired
house number area.

Press E.
The Start Route Guidance menu will
appear (
page 134).
Entering a parking
After entering the destination street
(
page 125) or selecting a city center
(page 124), you can select parking
nearby.
iYou can only select admissible
numbers. The number selected
appears magnified. iDo not confuse the Delete soft key
(deletion of the last character) with the
Back soft key (deletion of the complete
entry).
iHouse numbers may be displayed in
the list as single numbers, e.g.
1, or as
number areas, e.g.
2..8
.

130 NavigationDestination input
Press the
Parking
soft key.
The Parking Lot Selection menu is
displayed.
Selecting a parking lot
The map is displayed and shows the
destination and the available parkings lots.

Use the
Next
or
Prev.
soft key to
select a parking lot on the map.
The parking lot selected is marked in
color. The name and distance from the
current position are shown on the
status bar.

Press the
Details
soft key to see
more information about the parking lot.

Press E.
Route guidance will begin.
iIf there is no parking lot near
the destination, the message
No
Parking
Found
will appear.

131 Navigation
Destination input
Selecting a destination using the map
Press c.

Press one of the buttons H, h, g,
G, F, f.
or

Press the
Map
soft key, e.g. in the
Destination Entry menu (
page 121).
The map is shown in full view and
cross-hairs appear.
If soft key displays are hidden:

Press any soft key.
The soft key displays will appear.Available soft keys

POIs
soft key:
Brings you to the Points of Interest
(POI) menu (
page 156).

Memory
soft key:
A window appears with the
message Position Saved as
MemPt
. (page 118).

Display
soft key:
The Map View display will appear.
You can adjust the map orientation
(
page 148).

Soft key +:
Zooming in for more detailed map.

Soft key ):
Zooming out for less detailed map.
iThe system automatically places the
cross-hairs on the current destination
address.
ic was pressed:
If no soft key is selected within approx.
8 seconds, the soft key display will
disappear again.