MERCEDES-BENZ S CLASS 2023 Owners Manual

Page 371 of 622

Activate or deactivate the function.
Adjusting the dashcam
If the vehicle is equipped with a dashcam, it can be used in AMG TRACK PACE.
Select Dashcam .Select Track Race or Drag Race and activate
Activate Recording .You can set which overlay is to be used in the
recorded video under Video Overlay Content .
Plug-in hybrid settings
Con"Nguring the charging settings
Multimedia system:
4 © 5
Hybrid 5
Charging
Setting the charging program
Select Home, Work or Standard .
Opening the socket "Oap
Press Open socket flap .
The socket "Oap will open and can be closed
again by hand.Releasing the charging cable (mode 3 or 4)
When the function is active, the charging cable
will be unlocked when the maximum state of charge is reached.Select Home or Work .Activate or deactivate Unlock Charging Cable .
Activating and deactivating location-based charg-
ing
Select Charging Program, Home or Charging
Program, Work .Activate or deactivate Select Based on Loca-
tion .
When the function is activated, the vehicle\bs cur-
rent position will be saved as one of the selected
options. When the address is reached again, a brief query will appear as to whether the respec-
tive charging program should be selected.
Activating and deactivating fast charging
Activate or deactivate the Fast Charging func-
tion.
The Fast Charging function increases the maxi-
mum possible charging capacity at charging sta-
tions up to 60 kW in order to charge the vehicle\bs high-voltage battery more quickly. A"ser the charg-
ing process is complete, the charging capacity in
the "Standard" charging program will again be limited to 20 kW in order to protect the high-volt-
age battery.
Setting the departure time
The set departure times are used for the vehicle\bs pre-entry climate control and for predictions
regarding the approximate state of charge and
range at the time selected. When fast charging is deactivated, the charging process start time will
be optimized for the next departure time. When
fast charging is activated, the charging process will start immediately, irrespective of the nextdeparture time.Select Next Departure Time .
The following charging times can be selected:
= individual charging times
= a Week Profile
Setting an individual departure time
Select Add New Time and set the time.
or
MBUX multimedia system369

Page 372 of 622

Select

Page 373 of 622

&WARNING Risk of accident and injury due
to imprecise positioning of additional
information
The additional information from the augmen-
ted reality display may be inaccurate and is not a substitute for observing and assessing
the actual driving situation.
Always keep an eye on the actual tra"Pc
situation when carrying out all driving
maneuvers.
Switching navigation on
Multimedia system:
4 ©
Alternatively, press the © button on the
steering wheel on the right (  page 345).
The zero layer with the digital map is dis-
played.Navigation overview
Digital map
1Navigation module (reduced view)Route guidance active:The navigation module shows the information
relevant to the route in the zoomed-out view, e.g. the destination or a tra"Pc delay{ Ends the current route guidanceTapping opens the navigation module in the
expanded view with the Route2Destination entry3Searches for a parking space4Map orientation

Page 374 of 622

=3D and direction of travel
= Map with complete route\bIf the map is moved, the map switches
between 3D direction of travel and 2D north
orientation.
The following map types 4 are available:
= Daytime display
= Night-time display
= Satellite map
\bIf you notice a problem with the digital map
you can report this under https://
mapfeedback.here.com/#/report.Navigation module (expanded view)Example: route guidance is active1Destination2Searches for a gas station3Switches tra"Pc information display on or o"MOverview of the toll system\bThe toll system is optional equipment and is
not available in all vehicles.
Debiting of toll charges at freeway toll gates is
facilitated with an electronic payment system.
The toll system uses RFID (Radio Frequency Iden-
ti"Ncation) for data transfer between the control
unit and the toll station.
The toll system is initially switched o"M at the fac-
tory.
The control unit is in the vehicle glove box. In order to be able to use the toll system, it musthave been registered by the customer and activa-ted by the service provider:
= Activate the toll system in the settings of the
MBUX multimedia system or on the control unit.
= There are two ways to register and activate:
- In the Mercedes me App, register the unit
identi"Ncation number of the control unit
and activate the toll system.
372MBUX multimedia system

Page 375 of 622

-Alternatively, you can register and activate
via the Toll Service app.
Activation of the toll system can take up to
48 hours a"ser registration.
When the toll system is activated, the automatic
detection of the number of vehicle occupants is
initially switched o"M at the factory. The number of
vehicle occupants is preset with one person.
The following applies for roads on which toll
charges are dependent on the number of vehicle occupants:
= If the automatic detection of the number of
vehicle occupants is switched o"M, the number
of vehicle occupants must be selected man- ually. This ensures correct toll accounting.
= The number of vehicle occupants can be
transmitted automatically. In the process, the number of seat belts worn is determined.
If the number of detected persons does not
correspond with the number of persons
actually in the vehicle, the number of persons
must be manually selected.The standard setting of one person does not need to be changed for roads which require toll pay-
ment regardless of the number of vehicle occu-
pants.
The toll system enables the payment of toll
charges in many states of the USA.\bIn Mexico, for example, the toll system can be
registered and activated for journeys to the USA.
Notes on use
= You can only use the toll system once registra-
tion and activation are complete.
= Drive at the prescribed vehicle speed in the
toll lane.
= Mercedes-Benz recommends operation using
the MBUX multimedia system. Alternatively, this can also be done on the control unit in
the glove box.
= For safety reasons, entries should be made
while the vehicle is stationary.
= For further information, please consult the
Mercedes me App or an authorized Mercedes- Benz Center.
Or call 1-800-FOR-MERCedes (in the USA) or 1-800-387-0100 (in Canada).
For information on how to register and activate
the toll system, see the Digital Operator\bs Manual.
Destination entry
Requirements
= For the online search:
- There is an Internet connection.
- Mercedes me connect is available.
- You have set up a user account in the
Mercedes me Portal.
- The vehicle is connected with the user
account and you have accepted the terms
of use.
- Further information can be found at:
https://www.mercedes.me
- The service is available.
- The service has been activated at an
authorized Mercedes-Benz Center.
MBUX multimedia system373

Page 376 of 622

Multimedia system:4 © 5
ªExample: entering a POI or address1Input line with current entry2Search result3Selects destination input, displays further
destination inputs with double arrow4Deletes an entry5Adopts the search result in the input line and
continues the search6Deletes the last character entered7Hides the keypad8Switches to handwriting recognition9Starts the MBUX voice assistantASets the written languageBSwitches to digits and special charactersCSwitches to upper-case or lower-case lettersEnter the destination in 1. The entries can
be made in any order. The search results are displayed in a list.\bOnline search results for POIs may contain
additional information, for example opening
times and prices. The information is provided
by an online map service.
This online function is not available in all
countries.\bYou can enter a destination as a three-word
address from what3words. This option is not
available in all countries.Hide the keyboard with v.Select the destination in the list.
The route is calculated.\bObserve the notes on the MBUX multimedia
system (  page 338).374MBUX multimedia system

Page 377 of 622

Calculating a route and using settings for route
guidance
Detailed display with a route (example)
1Calls up alternative routes2Adds an intermediate destination to the route and recalculates the route3Sets intermediate destination as new destina-tion and calculates new route4Selects a point of interest in the vicinity of the destination5Address of the intermediate destination
A"ser selection of a destination the route is be cal-
culated.
Select one of the options.
Calling up alternative routes
Select Routes .Select an alternative route.
Starting route guidance (there is no route yet)
Select  Let's Go! .
Calling up the detailed display with destination
address
Pull the bar between 2 and 3 upwards.
Depending on the destination selection and
availability, online content, for example ratings
and weather information, is shown.
If the destination is in a di"Merent time zone, a
message is displayed.To share a destination: select

Page 378 of 622

announcements for the route are taken into
account via Reroute Based on Traffic H .\bTrailer mode and online routes are not availa-
ble in all countries and for all vehicles.
Calculating alternative routes
In the navigation module (expanded view), select =.Select View.Activate Route Overview after Start .
Alternative routes are calculated for every
route.
Selecting alternative routes
\bIf Route Overview after Start has been
switched on and a route has been calculated,
the function is available.In the navigation module (expanded view), select Alternative Routes .When the alternative routes have been calcu-
lated, display the route in the navigation win-
dow by swiping to the right or le"s.Select Start.Activating a commuter route\bA user pro"Nle has been created and Allow
Destination Suggestions has been activated
in the user options (  page 357). Route guid-
ance is not active.In the navigation module (expanded view), select =.Select Route.Activate Activate Commuter Route .
The navigation system automatically detects
that the vehicle is on a commuter route.
For the daily commuter route, tra"Pc events on
the route are also reported when driving with-
out active route guidance.To select or delete a commuter route:
select Start or

Page 379 of 622

Activate Street Names and House Numbers .
During route guidance, the activated options
are shown as additional information in the
camera image.
Using map functions
Multimedia system:
4 ©
Increasing map scale
When the map is shown, tap twice quickly with
one "Nnger on the central display.
or
Move two "Nngers apart on the central display.
Decreasing map scale
Tap with two "Nngers on the central display.
or
Move two "Nngers together on the central dis-
play.
Moving the map
When the map is displayed, swipe in any direc-
tion with one "Nnger on the central display.To reset the map to the current vehicle posi-
tion: select = Center .
Selecting map orientation
Tap repeatedly on the

Page 380 of 622

The tra"Pc delay is displayed for the current
route. The smallest value for the display for
tra"Pc delays is a minute.
Displaying hazard warnings
If hazard warnings are available these can be
shown as symbols on the map. The display
depends on the settings for the Traffic Incidents
option.
In the navigation module (expanded view), select = ( page 371).Activate or deactivate Traffic Incidents.
If the option is activated, all of the symbols are shown.
If the option is deactivated, the symbols are
only shown when there is a hazard warning.
The following hazards may be shown on the
map:
= Accidents and breakdowns
= Slippery roads, fog, crosswinds and heavy
rain
= Hazards reported manually
= Vehicle with active hazard warning light=
Roadworks
= Additional hazards (if available)
Displaying online map contents
In the navigation module (expanded view),
select =.Select View.Switch on an online service, e.g. Weather.
Current weather information is displayed on
the navigation map, e.g. temperature or cloud
cover.
The service information is not shown in all
map scales, e.g. weather symbols.
Parking service
*NOTE Damage to the vehicle due to not
observing the maximum permitted head-
room clearance
If the vehicle height is greater than the maxi- mum permitted headroom clearance, the roof
and other parts of the vehicle may be dam-
aged.
Observe the signposted headroom clear- ance.If the vehicle height is greater than the permitted headroom clearance, do not
enter.Observe the changed vehicle height with add-on roof equipment.*NOTE Vehicle damage due to failure to
observe local information and parking
conditions
The data is based on the information provided
by the respective service providers.
Mercedes-Benz does not guarantee the accu-
racy of the information provided in relation to
the car park or parking area.
Always observe the local information and
conditions.\bThis service is not available in all countries.In the navigation module (expanded view), select = and switch on Parking.378MBUX multimedia system

Page:   < prev 1-10 ... 331-340 341-350 351-360 361-370 371-380 381-390 391-400 401-410 411-420 ... 630 next >