MERCEDES-BENZ S-CLASS SALOON LONG 2022 Owners Manual

can improve the supply of oxygen to cells and
t
he brain.
= Workout, backrest and Workout, cushion
These programmes require your cooperation.
Alternating between tensing and releasing
helps to improve blood Oow to your muscles.
Press against a pressure point as soon as you
feel it to activate back, abdominal and leg
muscles.
= Depth waves Wave-like movements in the
cushion can promote blood Oow and meta-
bolic processes in the lower back and legs.
= Deep workout Connect the Workout, back-
rest to the Workout, cushion. The vibrations
in the cushion intensify the eMectiveness of
tensing and releasing muscles when you tense
against the pressure point. This supports met-
abolic processes and blood Oow in the but-
tocks and legs. Selecting the massage programme for the front
seats Multimedia system:
4 © 5
Comfort 5
Massage 
Select a massage programme (  pag
e 137). 
Start the programme for the desired
seat ;. 
To set the massage intensity: switc
h High
intensity on or oM.
% The availability of this function is dependent
on t
he vehicle's equipment.
% For the rear seats, the massage programmes
can be select

ed on the following devices (if
available):
= On the rear displays
= On the MBUX rear tablet Resetting seat settings
Multimedia system:
4 © 5
Comfort 5
Seat 
Select Reset . 
Select

*
NOTE Damag e to the seats caused by
objects or documents when the seat
heater is switched on When the seat heater is switched on, over-
heating ma
y occur due to objects or docu-
ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to the
seat surface. 
Make sure that no objects or documents
ar

e on the seats when the seat heater is
switched on. Requirements:
= The po

wer supply is switched on. 
Press button 1 r
epeatedly until the desired
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are oM, the seat heating is switched oM.
% The seat heating will automatically switch
do

wn from the three heating levels aser 8, 10
and 20 minutes until the seat heating
switches oM. Seats and stowing
139

%
If you switch the power supply oM and on
ag ain within 20 minutes, the previous setting
of the seat heating for the driver's seat will
remain active.
% You can set the heat distribution of the heated
sections among t

he seat cushions and seat
backrests on the front and rear seats using
the multimedia system ( page 136).
% Vehicles with the Warmth Comfort Package:
y

ou can adjust the heating of the centre con-
sole and door armrests using the multimedia
system (  page 140). Setting the panel heating
Multimedia system:
4 © 5
Comfort 5
Seat
5 Heating settings 5
Panel heating
When t

he seat heating is switched on, the armr-
ests, the centre panels of the doors and the
centre console can be heated. 
Switch the function for the desired seats on or
oM. Switching the seat ventilation
on/oM Requirements:
= The po

wer supply is switched on. 
Press button 1 r
epeatedly until the desired
blower setting has been reached.
Depending on the blower setting, up to three
indicator lamps will light up. If all indicator
lamps are oM, the seat ventilation is switched
oM. 140
Seats and stowing

%
If you switch the power supply oM and on
ag ain within 20 minutes, the previous seat
ventilation setting for the driver's seat will
remain active. Steering wheel
Adjusting the steering wheel electrically
&
WARNING Risk of accident due t
o adjust-
ing the vehicle settings while the vehicle is
in motion
You could lose control of the vehicle in the fol-
lo
wing situations in particular:
= if you adjust the driver's seat, the head
restraint, the steering wheel or the mirror
while the vehicle is in motion
= if you fasten your seat belt while the vehi-
cle is in motion 
Before starting the vehicle: in particular,
adjus

t the driver's seat, head restraint,
steering wheel and mirror, and fasten
your seat belt. &
WARNING Risk of entr
apment for children
when adjusting the steering wheel
Children could injure themselves if they adjust
t
he steering wheel. 
Never leave children unattended in the
v
ehicle. 
When leaving the vehicle, always take the
k
ey with you and lock the vehicle. The steering wheel can be adjusted when the
po
wer supply is disconnected. 1
To move up
2 To move back
3 To move down
4 To move forward 
Save the settings with the memory function
( pag

e 145). Seats and stowing
141

Switching the steering wheel heater
on/oMRequirements:
= The po
wer supply or the vehicle has been
switched on. 
Push the switch into position 1 or 2.
If indicat
or lamp 3 lights up, the steering
wheel heater is switched on. When you switch the vehicle
oM, t
he steering
wheel heater will switch oM. Linking the steering wheel heater to the seat heat-
ing Requirements:
= The po

wer supply or the vehicle has been
switched on.
Multimedia system: 4 © 5
Comfort 5
Seat
5 Heating settings 
Tap on Additional steering wheel heater .
The s
teering wheel heater will be linked to the
seat heating.
When the function has been activated, the steer-
ing wheel heat
er will automatically be activated
and deactivated when you switch the seat heating
on and oM. Easy entry and exit feature
Using the easy entry and exit feature
&
WARNING Risk of accident when pulling
a
way during the adjustment process of
the easy entry and exit feature
You could lose control of the vehicle. 
Always wait until the adjustment process
is com

plete before driving oM. &
WARNING Risk of becoming tr
apped dur-
ing adjustment of the easy entry and exit
feature
You and other vehicle occupants !


Move the adjustment lever of the steer-
ing wheel.
The adjus
tment process will be stopped.
If there is a risk of becoming trapped by the
dr
iver's seat: 
Press the seat adjustment switch.
The adjus
tment process will be stopped. 
Never leave children unattended in the
v
ehicle. 
When leaving the vehicle, always take the
k
ey with you and lock the vehicle. Vehicles with memory function:
y
ou can stop the
adjustment process by pressing one of the mem-
ory function position switches. &
WARNING Risk of becoming tr
apped if
children activate the easy entry and exit
feature!

Setting the easy entry and exit feature
Requirements:
= The aut
omatic seat adjustment has been acti-
vated ( page 136).
Multimedia system: 4 © 5
Settings 5
Vehicle
5 Easy entry and exit feature 
Select Steering wheel and seat , Steering
wheel only or Off.
% If you are using an individual user pr
oNle, this
information is used for the easy entry and exit
feature. This will cause the driver's seat and
steering wheel to move into the correct posi-
tion automatically . Memory function
Function of the memory function
&
WARNING Risk of an accident if t
he mem-
ory function is used while driving
If you use the memory function on the driver's
side while dr
iving, you could lose control of
the vehicle as a result of the adjustments
being made. 
Only use the memory function on the
dr
iver's side when the vehicle is station-
ary. &
WARNING Risk of entr
apment when
adjusting the seat with the memory func-
tion
When the memory function adjusts the seat,
y
ou and other vehicle occupants !

You can save the following settings for the front
seat
:
= Seat, backrest, head restraint position and
contour of the seat backrest in the lumbar
region
= Vehicles with an active multicontour seat:
- Side bolsters of the seat backrest
- Shoulder of the seat backrest
- Contour of the seat backrest
- Dynamic function level
= Seat heating: distribution of the heated sec-
tions of the seat cushion and seat backrest
= Driver's side: steering wheel position and posi-
tion of the outside mirrors on the driver's and
front passenger sides
= Head-up display (depending on vehicle equip-
ment) Operating the memory function
Storing

Set the seat, the steering wheel, the head-up
displa
y and the outside mirror to the desired
position. 
Press the V butt
on and then release it. 
Press one of the preset position buttons 7,
T or U wit
hin three seconds.
An acoustic signal sounds. The settings are
stored. 
To call up: pr
ess the preset position button
7, T or U.
The seat is moved to the stored position. Aser
releasing the button, the front seat, outside
mirror, head-up display and steering column
continue to move into the stored position
automatically. Memory function in the rear compartment
Function of the memory function in the rear
passeng
er compartment Operating the rear seat
R

ear seat settings for up to three people can be
stored and called up using the memory function in
the rear compartment.
You can save the following settings for the rear
seat:
= Position of the seat, backrest and head
restraint Seats and stowing
145

=
V ehicles with active multicontour seats: the
seat side bolsters of the seat backrest as well
as the contour of the seat backrest in the lum-
bar region
= Seat heating: distribution of the heated sec-
tions of the seat cushion and seat backrest
Operating the front passenger seat and rear seat
Front passenger seat adjustments and rear seat
adjustments for up to three people can be stored
and called up using the memory function in the
rear compartment.
You can save the following settings for the front
passenger seat:
= Position of the seat, backrest and head
restraint
You can save the following settings for the rear
seat: = Position of the seat, backrest and head
restraint
= Vehicles with active multicontour seats: the
seat side bolsters of the seat backrest as well
as the contour of the seat backrest in the lum-
bar region =
Seat heating: dis tribution of the heated sec-
tions of the seat cushion and seat backrest
The following settings are also stored to a mem-
ory position, if the indicator lamp in the v but-
ton lights up:
= Position of the footrest of the front passenger
seat, if available
= Position of the screen, if available
Using the preset position buttons, you always
store the current setting of each seat. Operating the rear seat via the memory function
in t
he rear passenger compartment Storing

Press button 1.
The r

ear seat is selected if the indicator lamp
in the button does not light up. 
Adjust the rear seat using the buttons in the
door contr
ol panel ( page 124). 146
Seats and stowing

Example: vehicles without a reclining rear seat

Press the V butt on and then release it.
Vehicles without reclining rear seat: pr
ess one
of the preset position buttons 7, T or
U within three seconds.
The settings are stored. 
Vehicles with reclining rear seat: pr
ess one of
the preset position buttons 7 or T
within three seconds.
The settings are stored.
% Vehicles with reclining rear seat: y
ou cannot
store any settings on the L and C but-
tons for adjusting the reclined and standard
positions.
Calling up 
Press button 1.
The r

ear seat is selected if the indicator lamp
in the button does not light up. 
Vehicles without reclining rear seat: pr
ess pre-
set position button 7, T or U.
The seat is moved to the stored position. Aser
releasing the button, the rear seat is automati-
cally moved into the stored position. 
Vehicles with reclining rear seat: pr
ess one of
preset position buttons 7 or T.
The seat is moved to the stored position. Aser
releasing the button, the rear seat is automati-
cally moved into the stored position. Operating the front passenger seat and rear seats
via t

he memory function in the rear compartment Storing

Press button 1.
The r

ear seat is selected if the indicator lamp
in the button does not light up. 
Adjust the rear seat using the buttons in the
door contr
ol panel ( page 124). Seats and stowing
147