wiper blades MERCEDES-BENZ S55AMG 2006 W221 Owner's Manual

Contents
DOT, Tire Identification Number
(TIN) ............................................. 318
Maximum tire load ....................... 319
Maximum tire inflation pressure .. 320
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 320
Tire ply material ........................... 322
Tire and loading terminology ........ 323
Rotating tires ............................... 326
Winter driving .................................... 327
Winter tires .................................. 327
Block heater (Canada only) .......... 328
Snow chains................................. 328
Maintenance...................................... 329
Clearing the maintenance
service indicator........................... 330
Maintenance service
term exceeded ............................. 330
Calling up the maintenance
service indicator........................... 330
Resetting the maintenance
service indicator........................... 331
Vehicle care ....................................... 332
Cleaning and care of vehicle ........ 332
Practical hints.................................. 339
What to do if …? ................................. 340
Lamps in instrument cluster ......... 340
Lamp in center console................. 348
Vehicle status messages
in the multifunction display ........... 349
Where will I find ...? ............................ 384
First aid kit.................................... 384
Vehicle jack, vehicle tool kit,
luggage bowl, spare wheel ............ 384
Unlocking/locking in an emergency... 388
Unlocking the vehicle.................... 388
Locking the vehicle ....................... 389
Fuel filler flap ................................ 390
Opening/closing in an emergency ..... 391
Tilt/sliding sunroof ....................... 391
Replacing SmartKey batteries ............ 392
SmartKey ...................................... 392
SmartKey with KEYLESS-GO* ....... 393
Replacing bulbs .................................. 394
Bulbs ............................................. 395
Replacing bulbs for front lamps .... 397
Replacing bulbs for rear lamps ..... 399Replacing wiper blades ...................... 401
Removing wiper blades ................. 401
Installing wiper blades .................. 402
Flat tire............................................... 403
Preparing the vehicle .................... 403
Mounting the spare wheel ............ 403
Battery ............................................... 408
Disconnecting the battery ............ 409
Removing the battery ................... 409
Charging and reinstalling
the battery .................................... 409
Reconnecting the battery ............. 410
Jump starting...................................... 411
Towing the vehicle.............................. 413
Installing towing eye bolt .............. 415
Fuses.................................................. 416
Aids for replacing fuses ................ 416
Fuse boxes in passenger
compartment ................................ 417
Fuse boxes in engine
compartment ................................ 418

52 Getting startedDrivingWindshield wipers
The combination switch is located on the
left of the steering column.Combination switch1Single wipe
Wiping with windshield washer fluid
2Switching on windshield wipers
Switch on the ignition (
page 34).Switching on windshield wipers

Turn the combination switch to the de-
sired position depending on the inten-
sity of the rain.
0Windshield wipers off
IIntermittent wiping (interval depen-
dent on wetness of windshield)
IINormal wiper speed
IIIFast wiper speed!Do not operate the wipers when the
windshield is dry. Dust that accumu-
lates on a windshield might scratch the
glass and/or damage the wiper blades
when wiping occurs on a dry wind-
shield. If it is necessary to operate the
wipers in dry weather conditions, al-
ways operate the wipers with wind-
shield washer fluid (
page 53).
iIntermittent wiping interval is depen-
dent on wetness of windshield. Pauses
between wipes are automatically con-
trolled by the rain sensor.!Do not leave windshield wipers in inter-
mittent setting when vehicle is taken to
an automatic car wash or during wind-
shield cleaning. Wipers will operate in
the presence of water sprayed on the
windshield, and wipers may be dam-
aged as a result.

287 Operation
Engine compartment
Engine compartment
Hood
Opening
The hood lock release lever is located in
the driver’s footwell to the left of the park-
ing brake pedal.
1Release lever

Pull release lever 1 in the direction of
arrow.
The hood is unlocked and handle2
will extend out of the radiator grille.
2Handle for opening the hood

Pull handle 2 to its stop out of radiator
grille.

Pull up on the hood (do not pull up on
the handle) and then release it.
The hood will be automatically held
open at shoulder height by gas-filled
struts.
Warning!
G
Do not pull the release lever while the vehi-
cle is in motion. Otherwise the hood could
be forced open by passing air flow.
!To avoid damage to the windshield wip-
ers or hood, never open the hood if the
wiper arms are folded forward away
from the windshield.
Warning!
G
To help prevent personal injury, stay clear of
moving parts when the hood is open and the
engine is running. Make sure the hood is
properly closed before driving. When closing
the hood, use extreme caution not to catch
hands or fingers.
The radiator fan may continue to run for ap-
proximately 30 seconds or even restart af-
ter the engine has been turned off. Stay
clear of fan blades.


335 Operation
Vehicle care
Cleaning the Distronic* system sensor
cover
1Distronic system sensor cover
Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water to clean sen-
sor cover1.
To prevent scratches, never apply strong
force and use only a soft, non-scratchy
cloth when cleaning the sensor cover. Do
not attempt to wipe dirty sensors with a
dry cloth or sponge.Cleaning the Parktronic* system
sensors
1Parktronic system sensors

Clean the sensors1 on the bumpers
using a mild car wash detergent, such
as Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratchy cloth.
When using a steam cleaner or power
washer, aim nozzle only briefly from a min-
imum distance of 12 in (30 cm) at
sensors1.
Do not apply strong pressure to the sensor
cover, applying strong pressure may dam-
age the sensor cover.To prevent scratches, never apply strong
force and only use a soft, non-scratchy
cloth when cleaning the sensor. Do not at-
tempt to wipe dirty sensors with a dry cloth
or sponge.
Wiper blades

Turn on the wipers and place it in a ver-
tical position.
For information on placing the wipers to a
vertical position, see “Replacing wiper
blades” (
page 401).
!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood.


336 OperationVehicle care
Clean the wiper blade inserts with a
clean cloth and detergent solution.Window cleaning

Turn on the wipers and place it in a ver-
tical position.
For information how to place the wipers in
a vertical position, see “Replacing wiper
blades” (
page 401).

Use a window cleaning solution on all
glass surfaces.
An automotive glass cleaner is recom-
mended.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before cleaning the wiper blades.
Otherwise, the wiper motor could suddenly
turn on and cause injury. !Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
!The windshield wipers must be in a ver-
tical position before folding them away
from the windshield. They could other-
wise damage the hood. Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before cleaning the wiper blades.
Otherwise, the wiper motor could suddenly
turn on and cause injury.
!Fold the windshield wiper arms back
onto the windshield before turning the
SmartKey in the starter switch.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.


339 Practical hints
What to do if …?
Where will I find ...?
Unlocking/locking in an emergency
Opening/closing in an emergency
Replacing SmartKey batteries
Replacing bulbs
Replacing wiper blades
Flat tire
Battery
Jump starting
Towing the vehicle
Fuses

401 Practical hints
Replacing wiper blades
Replacing wiper blades
Wiper blades in vertical position
Removing wiper blades
Turn SmartKey in starter switch
position1.

Turn combination switch to wiper
settingII (
page 52).

With wiper arm in vertical position, turn
SmartKey in starter switch to
position0.

Fold the wiper arm forward until it
snaps into place.

Turn the wiper blade at a right angle to
wiper arm (arrow 1).

Slide the wiper blade sideways out of
the retainer in the direction of
arrow2.
!To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
Warning!
G
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle’s on-board electronics have
status0) before replacing a wiper blade.
Otherwise, the wiper motor could suddenly
turn on and cause injury.

402 Practical hintsReplacing wiper bladesInstalling wiper blades
Slide the wiper blade onto wiper arm
until it locks in place

Rotate the wiper blade into position
parallel to wiper arm.

Fold the wiper arm backward to rest on
the windshield. Make sure you hold
onto the wiper when folding the wiper
arm back.
!Never open the hood when the wiper
arm is folded forward.
Hold on to the wiper when folding the
wiper arm back. If released, the force
of the impact from the tensioning
spring could crack the windshield.
Do not allow the wiper arms to contact
the windshield glass without a wiper
blade inserted.
Make certain that the wiper blades are
properly installed. Improperly installed
wiper blades may cause windshield
damage.
For your convenience, we recommend
that you have this work carried out by
an authorized Mercedes-Benz Center.

455 Index
Cleaning
Cup holder 337
Distronic* system sensor cover 335
Engine 334
Gear selector lever 337
Hard plastic trim items 337
Headlamps 186
Headliner and shelf below rear
window 337
Instrument cluster 337
Leather upholstery 338
Light alloy wheels 337
Ornamental moldings 334
Paintwork 333
Parktronic* system sensor 335
Plastic and rubber parts 338
Seat belts 337
Steering wheel 337
Upholstery 338
Windows 336
Windshield 53
Wiper blades 335
Wood trims 338
Cleaning tires 299
Clock 25Closing 58
Cup holder 249
Glove box 243
Hood 288
Power tilt/sliding sunroof 212
Power windows 208, 209
Side windows 209
Trunk 105
Closing from the inside automatically*
Trunk 105
Closing in an emergency
Power tilt/sliding sunroof 391
Cockpit 22, 444
Cockpit management and data system
(COMAND) 444
Cold tire inflation pressure 323
COMAND 444
COMAND* see separate operating instruc-
tions
Combination switch 135
High beam 50
High beam flasher 135
Turn signals 51
Windshield wipers 52Control and operation of radio
transmitters 281
Control system 143, 444
AUDIO menu 148
Checking oil level 289
Convenience submenu 169
Display digital speedometer 148
Distronic* menu 156
Functions 145, 147
Instrument cluster submenu 163
Lighting submenu 164
Menus 146, 147
Multifunction display 143
Multifunction steering wheel 144
NAVI menu 155
Settings menu 160
Standard display menu 148
Submenus 145, 147
TEL* menu 153
Trip computer menu 157
Vehicle status message memory
menu 159
Vehicle submenu 168

461 Index
Height adjustments
Vehicle level 230, 233
High beam 50
Replacing bulbs 395
High beam flasher 135
High beam headlamps
Messages in display 370
Switching on 135
High mounted brake lamp 395
High-performance brake system
(S 65 AMG only) 275
Hood 287
Closing 288
Message in display 368
Opening 287
Hydroplaning 277
I
Identification labels 422
Emission control information
label 422
Vacuum line routing diagram
label 422
Ignition 34, 36
Switching on 34, 46, 47Immobilizer 85
Activating 85
Deactivating 85
Indicator lamps see Lamps, indicator and
warning
Individual seats* 117
Head restraint height 118
Infant and child restraint systems 71
Installing 74
LATCH child seat anchors 75
Information
About service and warranty 10
Button for Tele Aid 259
Infrared reflecting windshield 269
Inside rear view mirror
Auto-dimming 186
Installing
Infant and child restraint systems 74
Towing eye bolt 415
Wiper blades 402
Instrument cluster 24, 140, 446
Cleaning 337
Coolant temperature gauge 141
Illumination 140Multifunction display 143
Outside temperature indicator 142
Selecting language 164
Integrated remote control
Canadian programming 267
Erasing memory 268
Hand-held transmitter 265
Operating 268
Rolling code programming 266
Interior illumination
Delayed switch-off 167
Interior lighting 137
Activating automatic control 137
Deactivating automatic control 137
Manual operation 137
Reading lamps in the front 138
Reading lamps in the rear 138
Interior rear view mirror
Adjusting 41
J
Jump starting 411