menu setting MERCEDES-BENZ SL-Class 2004 R230 Comand Manual

216Info Services*/System settingsSystem settings1Changes by pressing Ä
2Changes by pressing Ä and ambient
light sensor
P Setting active
Q Setting not activeIf the settings menu (
page 206) is dis-
played

Turn the right-hand rotary/push-button
v to highlight “Display (day/night)...”
and press to confirm.
The “Display (Day/Night)” menu will
appear. The setting 2 is active, when
calling up the menu for the first time.

Turn the right-hand rotary/push-button
v to highlight the desired setting and
press to confirm.
The desired setting is active.
Setting 2 has been selected
When the light sensor senses low ambient
lighting conditions, the screen will change
to night display.Changing the display

Press Ä to access the following dis-
plays in succession.
Day display

Night display

Screen off

and the Day display again
Setting the display dimming charac-
teristics (day and night display)

217
Info Services*/System settings
System settings
If the settings menu is displayed
Turn the right-hand rotary/push-button
v to highlight “Factory settings” and
press to confirm.
An inquiry menu will appear. “Yes” is
highlighted.
Accepting the factory settings

Press the right-hand rotary/push-
button v.
A screen with the factory setting will
appear for 8 seconds.
The main system settings menu is reac-
tivated.The factory settings are:

Acknowledgement beep – off

Info beep – off

Language – English (imp.)

Time display – 24 h

Date format –DD.MM (day, month)
If you do not wish to reset to factory
settings

Turn the right-hand rotary/push-button
v to highlight “No” and press to con-
firm.
The main system settings menu will ap-
pear.
Resetting all settings to the
factory settings

219
Info Services*/System settings
Auxiliary audio source

Turn the right-hand rotary/push-button
v to highlight “Aux” in the main sys-
tem settings menu and press to con-
firm.
The “Aux” menu will appear. The auxili-
ary audio source will switch on if it has
been connected to the COMAND cont-
rol unit.
Adjusting the volume (
page 14).Adjusting the volume level of an auxilia-
ry audio source

Adjust volume of vehicle radio to a
comfortable listening level.

Connect adapter cable to portable tape
deck and to vehicle (socket in glove
box).

Press ( button on COMAND unit.

Activate the “Aux” menu as described.

Press “Play” button on the portable
tape deck.

Adjust the volume on the portable tape
deck so that the audio system output is
at or near the same comfortable level
previously set in radio mode.

Volume can now be adjusted using
either COMAND or volume controls on
multifunction steering wheel.Muting auxiliary audio source

Press Ö.
Symbol R will appear.
Canceling mute function

Press Ö again.
Symbol R will disappear.
iThe sound adjustments for the auxiliary
audio source are independent of those
selected for the COMAND audio sour-
ces.
iOnly the volume setting of the tape play-
er can be controlled using the
COMAND system.

225 Index
M
Main menu structure 9
Map
altering the map scale 151
Compass needle 177
Heading-up 177
Map with cross hairs 150
moving the cross hairs 150
North arrow 177
North-up 177
Symbol for current vehicle
location 177
Memory functions
Radio operation 34
Menu
“City/Suburb” input menu 142
“Destination info” selection
menu 165
“Incoming calls memory” 112
“Phone book” 116
“Phone book” selection menu 105“Points of Interest” selection
menu 155
“Settings” 206
“Street” input menu 144
“Way point” 178
Category list 155
Main address menu 141
Main destination entry menu 140
Main destination memory menu 192
Main radio menu FM 28
Main system setting menu 202, 205
Phone book page (names) 106
Phone book pages (phone
numbers) 108
Ready for operation display
(Telephone) 96
SMS view 122
Traffic jam menu 182
Menu fields 9
Menu overview
CD operation 48Destination input 138
Radio operation 26
Telephone mode 94
Message
“Being activated” 61
“CALC. ROUTE” 163
“Caution. COMAND will shut down
now”. 10
“Caution. Please start engine. Otherwi-
se COMAND will shut down in 10
seconds” 10
“Caution. Please start engine. Otherwi-
se COMAND will shut down in 3
minutes” 10
“CD Magazine empty” 60
“CD-Reading error. Please use another
CD” 140
“Compiling sorted destination
list” 192, 197
“DEST AREA” 163
“Destination memory is full” 193