MERCEDES-BENZ SLK-Class 2007 R171 Comand Manual

120 Navigation*
Destination entry
Enter city (USA) appears in the status bar.
The characters in parenthesis indicate the
selected region (
page 119).
Accepting the displayed destination
Press and hold ' for approx. 2 sec-
onds.
Entering a different city
Use the keypad menu or the 12 button
keypad to enter the data of the city
(
page 115).
After entering the city a selection list of
cities appears indicated by
Select city
displayed in the status bar. Now contin-
ue with selecting a city.
Switching to a selection list is possible at
any time while entering a city.
Press the List soft key.
A selection list appears indicated by
Se-
lect city
displayed in the status bar.
Now continue with selecting a city.
Selecting a city
Use% or & to select the destina-
tion city.
The
Page soft keys allow scrolling
through the list page by page.
Press'.
After selecting the desired city, one of
the following menus appears:
For larger cities with more than 15
streets:
Enter Street menu (
page 122).
For smaller cities with up to
15 streets:
Select Street menu (
page 123).
If no streets are registered for the
selected city:
Select City Center menu
(
page 121).
The appropriate menu can be identified
from the display in the status bar.
i
Do not confuse the '7button with the
symbol in the main screen.
ok
i
The selection is cancelled if the Back
soft key is pressed.

121 Navigation*
Destination entry
Besides entering a street name
(
page 122), the following soft keys are
available for narrowing the destination.
Map soft key
Provides access to destination input di-
rectly via road map (
page 127),
CityCtr soft key
Provides access to the input of a city
section (center) (
page 121),
POIs soft key
Provides access to the input of a POI
referring to the destination city
(
page 156).
After the destination city (
page 119) has
been entered, the associated city center
(section of the city) can be selected.
Press the CityCtr soft key.
Enter center is displayed in the status
bar.Accepting the destination displayed
Press '.
Entering a center
Use the keypad menu or the 12 button
keypad to enter the data of the center
(
page 115).
After entering the center a selection
list of centers appears indicated by
Se-
lect center
displayed in the status bar.
Now continue with selecting a center.
Switching to a selection list is possible at
any time while entering a center.
Press the List soft key.
A selection list appears indicated by
Se-
lect center
displayed in the status bar.
Now continue with selecting a center.
Narrowing of the destination after
selecting a city
Entering a city center

122 Navigation*
Destination entry
Selecting a center
Use% or & to select a city center.
The Page soft keys allow scrolling
through the list page by page.
Press '.
The Start Route Guidance menu
(
page 131) appears.The system accesses one of the following
menus after entering of a destination city
(
page 119):
For larger cities with more than 15
streets:
Enter Street menu (
page 122).
For smaller cities with up to 15 streets:
Select Street menu (
page 123).
If no streets are registered for the se-
lected city:
Select City Center menu (
page 121).
The appropriate menu can be identified
from the display in the status bar.Entering a street
Use the keypad menu or the 12 button
keypad to enter the data of the street
(
page 115).
After entering the street a selection list
of streets appears indicated by
Select
street
displayed in the status bar. Now
continue with selecting a street.
Switching to a selection list is possible at
any time while entering a street.
Entering a street in the destination
city

123 Navigation*
Destination entry
Press the List soft key.
A selection list appears indicated by
Se-
lect street
displayed in the status bar.
Now continue with selecting a street.
Selecting a street
Use % or & to select a street.
The
Page soft keys allow scrolling
through the list page by page.
Press '.
The Start Route Guidance menu with
the selected destination information
appears;
or
If the street extends through several
city centers, the list of city centers re-
ferring to the street selected appears.
Selecting the city center referring to
the street selected
The system distinguishes between streets
with the same name in a city by specifying
the center. After selecting a street, a list of
city centers may appear.
The status bar shows how many times the
system found the same street name within
a given city.
Use% or & to select a center.
Press '.
The Start Route Guidance menu with
the selected destination information
appears.

124 Navigation*
Destination entry
The following soft keys are available to
continue narrowing the destination after
entering the street:
Map soft key
Provides access to further destination
input directly via road map
(
page 127),
Intrsct. soft key
An intersection with the destination
street can be entered (
page 124),
Hse. no. soft key
A house number on the destination
street can be entered (
page 125),
POIs soft key
A POI on or near the destination street
can be entered (
page 156).
The following soft keys can also be select-
ed:
Mode soft key
For setting the route mode
(
page 113),
Save soft key
Stores the entered destination in the
destination memory (
page 153).After entering a street (
page 122), a
street intersecting with this street can be
entered.
Press the Intrsct. soft key.
The Enter Intersection menu or a list of
all intersecting streets appears.
Narrowing of the destination after
selecting a street
i
Only the entry of either an intersecting
road or a house number is possible.
Entering an intersection
i
The Intrsct. soft key is only available if
streets intersecting the destination
street are stored as intersections on
the navigation DVD.

125 Navigation*
Destination entry
Enter Intersection menu
Proceed the same as when entering a
city name (
page 119).
List of intersecting streets
Use % or & to select an intersec-
tion.
The
Page soft keys allow scrolling
through the list page by page.
Press '.
The Start Route Guidance menu
(
page 131) appears.
A house number can be entered after en-
tering the destination street (
page 122).
Press the Hse. no. soft key.
The Enter House Number menu ap-
pears (
page 126);
or
The house number list appears. A
house number range can be selected.
(
page 126).
Entering a house number
i
An intersection instead of a house
number can be entered (
page 124).
Entry of both is not possible.
i
The Hse. no. soft key is only available
when registered house numbers are
stored on the navigation DVD for the
selected street.

126 Navigation*
Destination entry
Enter house number menu

Use #, $, %, &, 6 or 8 to
select the numbers. Press ' after
each selection;
or
Press! - " to enter the numbers.
Press the Delete soft key if necessary.
The number last accepted by the sys-
tem is deleted.
Press and hold ' for approx. 2 sec-
onds to confirm the input;
or
Use$ or & to select the sym-
bol and press'.
The house number list appears. Now a
house number range can be selected.Selecting a house number range

Use % or &7to select the desired
range of house numbers.
The
Page soft keys allow scrolling
through the list page by page.
Press '.
The Start Route Guidance menu
(
page 131) appears.
i
Do not confuse the Delete soft key (de-
letion of the last number) with the
Back
soft key (deletion of the complete en-
try).
i
The symbol can only be selected if
the system has recognized the house
number.
ok
ok

127 Navigation*
Destination entry
Press5;
or
Press the Map soft key if it appears in a
menu.
The map appears in full-screen display.
1Symbol = current position
If the soft key displays are hidden,
press any soft key.
The soft key displays appear.Selectable soft keys
Coord. soft key
Allows entering a destination via geo
coordinates (
page 128),
Memory soft key
The current location is stored
(
page 130),
Display soft key
You can select which POIs will appear
as symbols on the map (
page 147).
 soft key
The map scale will change to display a
more detailed map,
 soft key
The map scale will change to display a
map that shows a wider area.
Moving the map and selecting a desti-
nation
Move the cursor using#, $, %,
&, 6 or 8 to select the desired
destination.
Release the buttons.
If the system finds a street name at the
location the cursor is pointing to, the
corresponding street name is shown in
the status bar.
In this example:
WATER ST
Entering a destin ation using th e mapi
If no soft key is selected within
approx. 8 seconds, the soft key dis-
plays will disappear.
i
The Coord., Memory and Display soft key
are visible only if the map has been
called up using5.

128 Navigation*
Destination entry
Start route guidance to the selected
destination
Press '.
The Start Route Guidance menu
(
page 131) appears if route guidance
has not yet been activated.
Press'.
Route calculation begins.
If route guidance is already active, you
will be prompted to confirm that you
wish to use the location the cursor is
pointing to as the new destination.
Press# to select Yes.
Press'.
Route calculation begins.Destination input via coordinates (longi-
tude and latitude) will only be possible if
the map display is visible and if the
Coord.
soft key is displayed.
Press the Coord. soft key.
The menu for entering coordinates ap-
p e a r s . Y o u c a n s e t t h e i n d i v i d u a l v a l u e s
for the longitude and latitude in this
menu.
i
The destination selection will be lost
when pressing the
Back soft key.
The system reverses to the details of
the previously entered destination.
To store the destination selection,
press the
Memory soft key. For details on
storing map locations (
page 130).
Entering a destination via geo
coordinates

129 Navigation*
Destination entry
1"Hours" longitude value
2"Minutes" longitude value
3"Seconds" longitude value
4"Seconds" latitude value
5"Minutes" latitude value
6"Hours" latitude value
Press# or $ to selec t the va lue you
wish to set.
Select the desired value using%
or
&.
Keep repeating the last two steps until
you have set the required longitude and
latitude.
Press'.
If the coordinates entered are located
in the digital map range, the display will
switch to map display with cursor. The
center point of the cursor indicates the
position of the coordinates entered on
the map.
Press '.
The Start Route Guidance menu
(
page 131) appears if route guidance
has not yet been activated.
Press'.
Route calculation begins.
If route guidance is already active, you
will be prompted to confirm that you
wish to use the coordinates set as the
new destination.
Press# to select Yes.
Press'.
Route calculation begins.
i
To store the indicated position, press
the
Memory soft key. For details on stor-
ing map locations (
page 130).
i
Route guidance is only possible to co-
ordinates within the digital map range.