fuse MERCEDES-BENZ SLK-Class 2008 R171 Comand Manual

94 Telephone*Telephone operationThe ringing tone is audible in the event of
an incoming call. The call screen pops up
on the current display.
If the multifunction display in the instru
-
ment cluster is set to telephone mode, the
call screen also appears in the multifunc
-
tion display.Answering calls On the COMAND control unit
Press
0
.
On the multifunction steering wheel
Press
s
.
In both cases the call is active. Commu
-
nication is conducted via the hands-free
system. The call volume can be adjusted ( page
31).

For other user functions, see

“Active call”
( page
99)
.
Ending or refusing a call On the COMAND control unit 
Press
/
.
On the multifunction steering wheel
Press
t
.
iIf a list is empty, the corresponding soft
key (
, Recvd.#
, Dialed
# or
SMS
) is
without function and appears shaded
out.Answering an incoming call
iThe caller’s number appears only if it is
transmitted.

The caller’s name only appears if the
number and the name are stored in the
phone book
( page
101)
.
iIt is also possible to accept, refuse or
end a call from the cell phone

( Telephone Operation Guide).

116 Navigation*Destination entry
You can see which characters can be
entered when using the keys.

Each additional depression moves you
to the next available character.The selected character appears black.

Wait until the character display disap
-
pears, or press

.
The character is entered.
Deleting a character
Press the
Delete
soft key if necessary.
The character last accepted by the sys
-
tem is deleted.
Confirming the data entry After entering all the characters the data
entry must be confirmed.
Press and hold

for approx. 2 sec
-
onds;
or
Use

or

to select the
sym
-
bol and press

.
.One frequently used destination address
can be established as the home address.
Open the Navigation main menu ( page
112)
.

Press the
Home
soft key.
A message
No home address stored

appears;
or
If a home address has already been es
-
tablished, the home address appears.
iDo not confuse the
Delete
soft key (de
-
letion of the last character) with the Back
soft key (deletion of the complete
entry).
iThe
symbol can only be selected if
the system has recognized the entry.Entering a home address
ok
ok

120 Navigation*Destination entryEnter city
(USA)
appears in the status
bar. The characters in parenthesis indicate
the selected region ( page
119)
.
Accepting the displayed destination 
Press and hold

for approx. 2 sec
-
onds.
Entering a different city
Use the keypad menu or the 12 button
keypad to enter the data of the city ( page
115)
.
After entering the city a selection list of
cities appears indicated by
Select
city
displayed in the status bar. Now
continue with selecting a city.
Switching to a selection list is possible at
any time while entering a city.

Press the
List
soft key.
A selection list appears indicated by Select city
displayed in the status
bar. Now continue with selecting a city.
Selecting a city
Use

or

to select the destina
-
tion city.

The
Page
soft keys allow scrolling
through the list page by page.

Press

.
After selecting the desired city, one of
the following menus appears: 
For larger cities with more than 15
streets:

Enter Street menu
( page
122)
.

For smaller cities with up to
15
streets:

Select Street menu
( page
123)
.

If no streets are registered for the
selected city:

Select City Center menu ( page
121)
.
The appropriate menu can be identified
from the display in the status bar.
iDo not confuse the

button with the
symbol in the main screen.
ok
iThe selection is cancelled if the
Back

soft key is pressed.

126 Navigation*Destination entryEnter house number menu 
Use

, 
, 
, 
, +
or
(
to
select the numbers. Press

after
each selection;
or
Press
3
- "
to enter the numbers.

Press the
Delete
soft key if necessary.
The number last accepted by the sys
-
tem is deleted.

Press and hold

for approx. 2 sec
-
onds to confirm the input;
or
Use

or

to select the
sym
-
bol and press

.
The house number list appears. Now a
house number range can be selected.
Selecting a house number range 
Use

or

to select the desired
range of house numbers.

The
Page
soft keys allow scrolling
through the list page by page.

Press

.
The Start Route Guidance menu ( page
131)
appears.
iDo not confuse the
Delete
soft key (de
-
letion of the last number) with the
Back

soft key (deletion of the complete en-
try).iThe
symbol can only be selected if
the system has recognized the house
number.
ok
ok

154 Navigation*Last destinations and destination memoryTo select lower or upper case or to select
special characters, the following shift
fields on the display are available:
= upper case = lower case = special characters

Use

, 
or

to select one of
the shift fields.

Press

.

Use

, 
, ,

, +
or
(
to
select the characters. Press

after
each selection.

If necessary, press the
Delete
soft key
to delete the character last entered.

Upon completion of the name entry
press and hold

for approx. 2 sec
-
onds;
or
Use

or

to select the
sym
-
bol and press

.
The system will save the entry.
ABCabc...
iDo not confuse the
Delete
soft key (de
-
letion of the last character) with the Back
soft key (deletion of the complete
entry).
ok