clock MERCEDES-BENZ V-CLASS 2021 User Guide

#
Press button 4. #
Use button 1or3 toset the minutes. #
Press button 4.
Se
Se tting t
tting t he time f
he time f or
ormat
mat #
Press button 1or3 until 4 0ashes on
menu bar 2. #
Press button 4. #
Press button 1or3 until the symbol forthe
time form at 0ashes. #
Press button 4. #
Select the desired time form at using button 1
or 3. #
Press button 4.
Se
Se tting t
tting t he day
he day #
Press button 1or3 until 4 0ashes on
menu bar 2. #
Press button 4. #
Press button 1or3 until the symbol forthe
day 0ashes. #
Press button 4. #
Use button 1or3 toselect the desired day
of thewe ek. #
Press button 4.
Switc
Switc hing immediat
hing immediat e heating mode
e heating mode on/o.
on/o. #
T
To switc
o switc h on:
h on: press button 4until y
0ashes on menu bar 2.
On will brie0y appear on the displa y,follo wed
by there maining operating duration or the
à symbol for continuous operation. #
T
To switc
o switc h
h o.:
o.: press button 4until Off
appears on the displa y.
Se
Se tting t
tting t he depar
he depar tur
ture time (auxiliar
e time (auxiliar y w
y war
arm-air
m-air
heat
heat er)
er)
Yo u can set thre e departure times with the switch
cloc k.Fo llowing malfunctions or if the battery has
been disconnected, you will need tore-set the
departure times.
Selecting a pr Selecting a pr ogr
ogram memory
am memory #
Press button 1or3 until j0ashes on
menu bar 2. #
Press button 4.
The numbers of the prog ram memories are
shown on status bar 5. The tick denotes acti-
va ted prog ram memories. #
Use button 1or3 toselect the desired pro-
gr am memor y. #
Press button 4.
A
A ctiv
ctiv ating/deactiv
ating/deactiv ating pr
ating progr
ogram memor
am memor ies
ies #
Use button 1or3 toselect OnorOff. #
Press button 4.
Editing pr
Editing pr ogr
ogram memor
am memor ies
ies #
Use button 1or3 toselect 4. #
Press button 4. #
Set the day of thewe ek and the time
(/ page 133).
Se
Se tting t
tting t he t
he tem
emper
per atur
atur e and oper
e and oper ating dur
ating duration
ation
(auxiliar
(auxiliar y w
y war
arm-air heat
m-air heat er)
er) #
Press button 4. #
Set thete mp erature with button 1or3. #
Press button 4. #
Set the operating duration with button 1or
3 or select theà symbol for continuous
operation. #
Press button 4.
% The operating duration set is the default set-
ting for immediate heating mode. You can set
th e operating duration within a range of 10 to
120 minutes or tocontinuous operation.
R
R ectifying pr
ectifying pr oblems wit
oblems with t
h the auxiliar
he auxiliar y w
y war
arm-air
m-air
heat
heat er
er
The messag
The messag e
eERROR appear
appears on t
s on the switch
he switch
cloc
cloc k's displa y.
k's displ ay.
Po ssible cause:
R A malfunction has occur red. #
Have the auxiliary heating checked at a quali-
/ed specialist workshop.
The messag
The messag e
eINIT appear
appear s on t
s on the switc
he switc h cloc
h clock's
k's
displa y.
displa y.
Po ssible cause:
R The po wer supply has been inter rupted. All
sa ved settings ha vebeen dele ted.
Au tomatic hardware de tection is cur rently
active. #
When automatic ha rdwa redetection is com-
ple te, set the day of thewe ek, time and operat-
ing duration (/ page 133). #
Set the departure time (/ page 134). 134
134
Climate control

#
Before you open the fuel /ller cap or take
hold of the pump nozzle, touch the met-
allic vehicle body. #
Toavo id creating ano ther electrostatic
ch arge , do not get into theve hicle again
during there fuelling process. &
W
WARNING
ARNING Risk of /re from fuel mixtu re
Ve hicles with a diesel engine:
If yo u mix diesel fuel with petrol, the 0ash point
of the fuel mixture is lo werth an that of pure
diesel fuel.
While theve hicle is running, component parts
in theex haust system may overheat without
wa rning. #
Neverre fuel using petrol. #
Never mix petrol with diesel fuel. *
N NOOTE
TE Do not use diesel torefuel vehicles
with a petrol engine If
yo u ha veacciden tally refuelled wi th the
wrong fuel:
R Do not switch on theve hicle. Otherwise
fuel can enter the engine.
Even small amounts of the wrong fuel
could result in damage tothe fuel system
and the engine. The repair costs are high. #
Consult a quali/ed specialist workshop. #
Have the fuel tank and fuel lines drained
comple tely. *
N
NO
OTE
TE Do not use petrol torefuel vehicles
with a diesel engine If
yo u ha veacciden tally refuelled wi th the
wrong fuel:
R Do not switch on theve hicle. Otherwise,
fuel can enter the fuel system.
Even small amounts of the wrong fuel
could result in damage tothe fuel system
and the engine. The repair costs are high. #
Consult a quali/ed specialist workshop. #
Have the fuel tank and fuel lines drained
comple tely. *
N
NO
OTE
TE Damage tothe fuel system caused
by ove r/lled fuel tanks #
Only /ll the fuel tank until the pump noz-
zle switches o.. R
R
eq
eq uir
uir ements:
ements:
R The vehicle is unloc ked and switched o..
R The auxiliary heating is switched o..
R The front leT-hand door is open.
% Do not getback into theve hicle during the
re fuelling process. Othe rwise, electrostatic
ch arge could build up again.
Obser vethe no tes on operating 0uids
(/ page 271). #
Open fuel /ller 0ap 1. #
Turn fuel /ller cap 2anti-clockwise and
re mo veit. #
Close all vehicle doors topreve nt fuel vapours
from entering theve hicle interior. #
Comple tely slide the /ller neck of the pump
nozzle into theta nk, hook in place and refuel. #
Fillth e fuel tank only until the pump nozzle
switches o.. #
Replace fuel /ller cap 2and turn it clockwise.
Yo u will hear a click when the fuel /ller cap is
closed full y. #
Open the front leT-hand door. #
Close fuel /ller 0ap 1.
% V
Vehicles wit
ehicles wit h a diesel engine and incorr
h a diesel engine and incorr ect
ect
fuelling pr ot
fuelling prot ect
ector ag
or ag ains
ainst rt refuelling wit
efuelling wit h pe
h pet-
t-
r
r ol:
ol: the /ller neck is designed forre fuelling at
diesel /lling pumps for passenger vehicles. Driving and parking
147
147

#
Park theve hicle on a le vel sur face to/ll
th eAd Blue ®
tank. R
R
eq
eq uir
uir ements:
ements:
R The auxilia ryheating is switched o..
R The vehicle is switched o..
R The front leT-hand door is open.
The following message sth at appear in succession
in the inst rument cluster display indicate that you
need tore/ll theAd Blue ®
tank:
R Refill AdBlue See Owner's Manual
The AdBlue ®
tank has dropped tothere ser ve
le ve l.
R Refill AdBlue Emer. oper. in XXX km See Own-
er's Manual
The low AdBlue ®
leve l will result in limited per-
fo rm ance aTer there maining distance dis-
pla yed has been driven. Top up AdBlue ®
as
qu ickly as possible.
R Emergency operation: 20 km/h No start in
XXX km See Operating Instructions
The vehicle speed is limi tedto appr oximately
20 km/h. You will only be able todrive the
ve hicle the distance shown. Subsequentl y,it
will no longer be possible tostart theve hicle.
R Refill AdBlue Engine start not possible
The vehicle can no lon ger be star ted.
Yo u can also ha vetheAd Blue ®
/ll le vel and the
Ad Blue ®
range displa yed (/ page 148).
Opening t Opening t he A
he AdBlue
dBlue ®
®
/ller
/ller cap
cap #
Open the front door on the leT-hand side and
fo ld out /ller 0ap 1. #
Close all vehicle doors topreve nt ammonia
va pours from entering theve hicle interior. #
Turn blue AdBlue ®
/ller cap 2anti-clockwise
and remo veit.
Fu el /ller cap 3forth e fuel remains closed. R
R efuelling wit
efuelling wit h a
h ar
re/ll
e/ll canist
canist er
er Example
#
Unscr ewthe cap on AdBlue ®
re/ll canis ter1. #
Screw disposable hose 2onto the opening of
Ad Blue ®
re/ll canis ter1 until hand-tight. #
Screw disposable hose 2onto the /ller neck
of theve hicle until hand-tight. #
LiT up and tip AdBlue ®
re/ll canis ter1.
The /lling process stops when theAd Blue ®
ta nk is comple tely full.
Ad Blue ®
re/ll canis ter1 can be remo ved
when it has been only partially em ptied.
% Avoid storing AdBlue ®
containers permanently
in theve hicle. #
Unscr ewdisposable hose 2inreve rse order
from AdBlue ®
re/ll canis ter1 and the /ller
neck of theve hicle.
Closing t
Closing t he A
he AdBlue
dBlue ®
®
/ller
/ller cap
cap #
ATer /lling theAd Blue ®
tank, place the
Ad Blue ®
/ller cap on the /ller neck and tighten
it clockwise. #
Turn theAd Blue ®
/ller cap until the lettering is
legible and horizontal.
The /ller neck is only loc ked cor rectly when
th is is the case. #
Open the front leT-hand door /rst, and then
close the /ller 0ap. #
Switch on theve hicle.
The Refill AdBlue See Owner's Manual mes-
sage in the inst rument cluster display must go
out aTer appr oximately 20 seconds. If the
message continues tobe displa yed, you must
add more AdBlue ®
. Driving and pa
rking
149 149

The
eyelet on the ball neck is used exclusively for
attaching the trailer break away cable. You must
not attach a tow rope, a tow bar or anything similar
to theey elet. The eyelet has not been designed for
such a load and may tear. #
ShiT the transmission toposition j. #
Apply theve hicle's parking brake. #
Close all the doors. #
Position the trailer on a le vel sur face behind
th eve hicle.
% The height of the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjustable dr awbar. #
Couple up the trailer. #
T
To inst
o inst all an adapt
all an adapt er
er:
:open the co ver of the
soc ket. #
Inse rtplug 2with tab1 inthe soc ket's
gr oo ve 3 . #
Turn plug 2clockwise as far as it will go. #
Letthe co ver engage. #
Attach the cable tothe trailer with cable ties
(only in the case of adap ter cables). #
Make sure that the cable is alw ays slack for
ease of mo vement during cornering. #
Establish all electrical and other connections
to the trailer. In the process, attach the trailer's
break away cable totheey elet on the ball nec k. #
Check that the trailer's lighting system works
proper ly.
A trailer is de tected only if the electrical con-
nection is established cor rectly and the lighting
system is in working order. The function of
ot her systems also depends on this, e.g. ESP ®
,
PA RKTRONIC, Active Parking Assist, Blind Spot
Assist or Lane Keeping Assist. Even if
the trailer is connected cor rectl y,a mes-
sage may ne vertheless appear on the inst rument
cluster display in thefo llowing cases:
R LEDs ha vebeen ins talled in the trailer's lighting
system.
R The cur rent has fallen below the trailer lighting
system's minimum cur rent (50 mA)
% You can connect accessories up toa maxi-
mum of 240 W tothe permanent po wer sup-
pl y. #
Remo veobjects or devices that pr event the
trailer from rolling, e.g. choc ks. #
Release the trailer's parking brake.
U
Uncoupling a tr ncoupling a tr ailer
ailer &
W
WARNING
ARNING Risk of being crushed and
becoming trapped when uncoupling a
trailer
When uncoupling a trailer with an engaged
inertia-activated brake, your hand may become
trapped between theve hicle and the trailer
dr aw bar. #
Do not uncouple trailers with an engaged
overrun brake. *
N NOOTE
TE Damage when uncoupling in a state
of ove rrun Uncoupling in a state of
overrun can damage
th eve hicle. #
Do not uncouple trailers with an engaged
overrun brake. #
ShiT the transmission toposition j. #
Apply theve hicle's parking brake. #
Close all the doors. #
Apply the trailer's parking brake. #
Further secure the trailer against rolling away
with a wheel chock or similar object. #
Remo vethe trailer cables and saf etych ains. #
Uncouple the trailer. 180 180
Driving and parking

Example: cap and coolant
expansion reser voir
Chec
Chec king t
king t he coolant lev
he coolant lev el
el #
Slowly turn the cap 1ofthe coolant expan-
sion reser voir2 half a turn anti-clockwise and
allow overpressure toescape. #
Turn cap 1further and remo veit.
The coolant le vel is cor rect in thefo llowing cases:
R Uptomar ker bar 3when the engine is cold
R Ifth e engine is warm, up to1.5 cm over
mar ker bar 3
T
T op up t
op up t he coolant
he coolant
Only use coolant appr oved for Mercedes-Benz to
av oid damaging the engine cooling system. #
Referto the information on coolant
(/ page 277). #
Re/ll the coolant up tothe mar ker bar 3in
th e /ller opening of the coolant expansion res-
er vo ir2. #
Replace cap 1and tighten in a clockwise
direction. #
Start the engine. #
Set thete mp erature in theve hicle interior to
th e maximum output on the control panel of
th e climate control. #
ATer about /ve minutes, switch o. the engine
again and allow it tocool down. #
Check the coolant le vel again and top up the
coolant if necessar y. F
F
illing up t
illing up t he windscr
he windscr een w
een washer syst
asher syst em
em &
W
WARNING
ARNING Risk of /re and injury from
windscreen washer concentrate
Wi ndsc reen washer concentrate is highly 0am-
mable. #
Avoid /re, naked 0ames, smoking and
th e creation of spar kswhen using wind-
screen washer concentrate. &
W
WARNING
ARNING Risk of burns from hot compo-
nent parts in the engine compartment
Cer tain component parts in the engine com-
partment can be very hot, e.g. the engine, the
cooler and parts of theex haust system. #
Allow the engine tocool down and only
to uch component parts described in the
fo llowing. *
N
NOOTE
TE Damage totheex terior lighting due
to unsuitable windscreen washer 0uid Unsuitable windscreen
washer 0uids may dam-
age the plastic sur face of theex terior lighting. #
Only use windscreen washer 0uids that
are also suitable for use on plastic sur fa-
ces, e.g. MB SummerFit or MB WinterFit. T
T
opping up t
opping up t he w
he washer
asher 0uid
0uid Wa
sher 0uid reser voir (e xamp le) #
Obser vethe no tes on windscreen washer 0uid
(/ page 277). #
Pull cap 1upwards bytheta b. #
Top up thewa sher 0uid. Main
tenance and ca re
229
229

#
Turn theke yto position ginthe ignition lock
and remo veit from the ignition loc k. #
Use the parking brake tosecure theve hicle
against rolling away. #
Secure theve hicle bythe wheels. T
T
o
o wing ey
wing eye st
e st or
orag
ag e location
e location The
towing eye is located in theve hicle tool kit
(/ page 250). F
F
itting/r
itting/r emo
emoving t
ving t heto
he towing eye
wing eye F
F
itting and r
itting and r emo
emoving t
ving t he fr
he frontto
ont towing eye
wing eye
* NO
NOTE
TEDamage totheve hicle due toincor-
re ct use of theto wing eye When a
towing eye is used toreco ver a vehicle,
th eve hicle may be damaged in the process. #
Only use theto wing eyeto to wawa y or
to w start theve hicle. Fi
xture forth e front towing eye in the bumper #
Take theto wing eye and scr ewdriver from the
ve hicle tool kit (/ page 250).
F
F itting
itting #
Press the ar row on co ver1 and remo vecover
1 from the opening.
Yo u will see the /xture forth eto wing eye. #
Screw intheto wing eye clockwise tothe stop. #
Insert the scr ewdriver into theto wing eye and
tighten theto wing eye. #
Stow the scr ewdriver in theve hicle tool kit.
R
R emo
emo ving
ving #
Remo vethe scr ewdriver from theve hicle tool
kit. #
Insert the scr ewdriver into theto wing eye and
turn theto wing eye anti-clockwise. #
Unscr ewand remo vetheto wing eye. #
Insert co ver1 with the lug at theto p and
press it in at the bottom until it engages. #
Stow theto wing eye and the scr ewdriver with
th eve hicle tool kit.
R
R ear to
ear towing eye
wing eye Re
ar towing eye under the bumper #
When towing away or tow- starting a vehicle,
attach theto wing device torear towing eye
2 . #
Ifth eve hicle is equipped with a trailer tow
hitch, attach theto wing device tothe trailer
to w hitch (/ page 279). #
Obser vethe no tes on permissible towing me th-
ods (/ page 245). T
T
o
o w
w -st
-st ar
arting t
ting t he v
he vehicle (v
ehicle (v ehicle emerg
ehicle emerg ency st
ency st ar
art)
t) V
V
ehicles wit
ehicles wit h aut
h automatic tr
omatic tr ansmission
ansmission
* NO
NOTE
TEDamage tothe automatic transmis-
sion due to tow-starting The au
tomatic transmission may be damaged
in the process of tow- starting vehicles with
automatic transmission. #
Vehicles with automatic transmission
must not be tow- star ted. #
Obser vethe no tes and information on starting
assis tance (/ page 240).
V
V ehicles wit
ehicles wit h manual tr
h manual tr ansmission
ansmission #
Obser vethe no tes on permissible towing me th-
ods (/ page 245). Breakdown assistance
249
249

#
If necessar y,fold up there ar seat. #
Turn topro tary catch 1clockwise and bottom
ro tary catch 1anti-clockwise. #
Remo vecover2.
R
R emo
emo ving t
ving t he v
he vehicle t
ehicle t ool kit and jac
ool kit and jac k fr
k from t
om t he
he
t
t ool holder
ool holder St
ow age compartment with tool holder #
Remo veclamping st rap4. #
LiT o. tool holder co ver3. #
Carefully pull theve hicle tool kit and jack
upwards out of the st owage compartment. LiT
th e jack slightly before removing it and turn it
to a diagonal position in the st owage compart-
ment.
S
S t
to
o wing t
wing t he v
he vehicle t
ehicle t ool kit and t
ool kit and t he jack
he jack #
Before st owing, wind the jack tothe fully
closed position and place it so that the hand-
wheel is facing forw ards and the plate is facing
in wa rds. #
Place the jack and vehicle tool kit into theto ol
holder. #
Replace co ver3 oftheto ol holder. #
Tighten cla mping strap 4.
Closing t
Closing t he stow
he st owag
ag e com
e com par
partment
tment #
Put on co ver2. #
Turn topro tary catch 1anti-clockwise and
bottom rotary catch 1clockwise. #
Fold down there ar seat. Breakdown assis
tance
251
251

R
R
emo
emo ving a wheel
ving a wheel R
R
eq
eq uir
uir ements:
ements:
R The vehicle is raised (/ page 262).
When changing a wheel, avoid applying any force
to the brake discs since this could impair the le vel
of comfort when braking.
* NO
NOTE
TEDamage tothre ading from dirt on
wheel bolts #
Do not place wheel bolts in sand or on a
dirty sur face. #
Unscr ewthe wheel bolts. #
Remo vethe wheel. F
F
itting a ne
itting a ne w wheel
w wheel R
R
eq
eq uir
uir ements
ements
R The wheel is remo ved (/ page 263). &
W WARNING ARNING Risk of accident from losing a
wheel
Oiled or greased wheel bolts can cause the
wheel bolts tocome loose, as too can dam-
aged wheel bolts or wheel hub thre ads. #
Never oil or grease theth re ads. #
Intheev ent of damage totheth re ads,
contact a quali/ed specialist workshop
immediatel y. #
Have the damaged wheel bolts or dam-
aged hub thre ads replaced. #
Do not continue driving. &
W
WARNING
ARNING Risk of injury from tightening
wheel bolts and nuts
If yo u tighten the wheel bolts or wheel nuts
when theve hicle is raised, the jack could tip. #
Only tighten wheel bolts or wheel nuts
when theve hicle is on thegr ound. #
Obser vethe information on thech oice of tyres
(/ page 258). #
Obser vethe inst ructions and saf ety no tes on
ch anging a wheel (/ page 258).#
For saf etyre asons, only use wheel bolts or
wheel nuts which ha vebeen appr ovedby
Mercedes-Benz and forth e wheel in question. #
Clean the wheel and wheel hub contact sur fa-
ces. Low
Low
er
ering t
ing t he v
he vehicle
ehicle aTer
aTera wheel c
a wheel c hange
hange &
W
WARNING
ARNING Risk of accident due toincor-
re ct tightening torque
The wheels could come loose if the wheel bolts
or wheel nuts are not tightened tothe prescri-
bed torque. #
Ensure that the wheel bolts or wheel nuts
are tightened tothe prescribed tighten-
ing torque. #
Ifyo u are not sure, do not mo vetheve hi-
cle. Con tact a quali/ed specialist work-
shop and ha vethe tightening torque
ch ecked immediatel y. R
R
eq
eq uir
uir ements:
ements:
R The new wheel has been /t ted (/page 263). #
Place the adap ter and thera tchet on the he xa-
gon head nut of the jack such that the lettering
AB/DOWN is visible. #
T
To low
o low er t
er the v
he v ehicle:
ehicle: turnthera tchet of the
jack anti-clockwise. #
S
St
teel wheels:
eel wheels: tightenth e wheel bolts evenly in
a crosswise pattern in the sequence indicated
(1 to5 ) and toa maximum of 200 Nm. #
Light-allo
Light-allo y wheels:
y wheels: tightenthe wheel bolts
ev enly in a crosswise pattern in the sequence
indicated (1 to5 ) and toa maximum of
180 Nm. #
Check the tyre pressure of the ne wly/tted
wheel and adjust it if necessar y.
V
V ehicles wit
ehicles wit h t
h the tyr
he tyr e pr
e pressur
essur e monit
e monit or syst
or system:
em:all
/t ted wheels must be equipped with functioning
sensors. #
Retighten the wheel bolts tothe speci/ed tight-
ening torque aTer theve hicle has been driven
50 km. Wheels and tyres
263
263

Sno
Sno
w c
w chains
hains............................................. 253
Soc ke
Soc ket (12 V)
t (12 V)
Fr ont centre console........................... 104
Re ar.................................................. .104
Soc ke
Soc ket (230 V)
t (230 V)
Re ar.................................................. .105
SoTw
SoTw are
areupdate
update
System updates.................................. 200
Sound menu
Sound menu Functions overview............................. 213
Spar
Spar e wheel
e wheel
Fi tting/removing................................. 267
No tes................................................ .267
Specialis
Specialist w t work
ork shop
shop
see Quali/ed specialist workshop
Speci/c
Speci/c absorp
absorption r
tion rate
ate.............................. 19
Speed limit
Speed limit ation, wint
ation, winter tyr
er tyres
es
Setting................................................ 159
Speedomet
Speedomet er
er........................................... .181
St
St anding light
anding light............................................ 107
St
St anding/par
anding/par king lights
king lights
Re placing light sources...................... .114
St
St ar
art/st
t/st op function
op function
see ECO start/stop function
St
St ar
ar ting assist
ting assist ance
ance
see Jump-start connection point
St
St ar
ar ting t
ting t he engine
he engine
see Vehicle
St
St ar
arting-o.
ting-o. aid
aid
see Hill Start Assist
St
St ationar
ationar y heat
y heater
er
see Auxiliary heating
St
St ationar
ationar y heating
y heating
see Auxiliary warm-air hea ter
St
St ationar
ationar y heating/v
y heating/v entilation
entilation
Displ ays (remo tecont rol).................... 132
Setting (remo tecont rol)......................1 31
St
St ationar
ationar y heating/v
y heating/v entilation
entilation
see Auxiliary warm-air hea ter
see Hot-water auxiliary heater
St
St eer
eer ing wheel
ing wheel
Ad justing.............................................. 98
St
St eer
eer ing wheel
ing wheel g
gear
ear shiT
shiT paddles
paddles...............1 44
St
St eer
eer ing-wheel butt
ing-wheel butt ons
ons.................................. 8
St
St opping t
opping t he alar
he alarm (AT
m (ATA)
A)............................ .68
St ow
St ow ag
age com
e com par
partment in t
tment in t he r
he rear
ear
Jack.................................................... 250
Ve hicle tool kit.................................... 250 S
S
t
to
o w
w ag
ag e space
e space
Glasses compartment........................... 99
Sugg
Sugg es
estionstions
Con/guring........................................ .199
Sulphur cont
Sulphur cont ent
ent........................................2 72
Summer tyr
Summer tyr es
es........................................... 252
Surr
Surr ound lighting
ound lighting
Switching on/o.................................. 112
Surr
Surr ound V
ound V iew
iew
see 360° Camera
Suspension
Suspension see AIRMATIC
S
S VHC (subst
VHC (subst ances of v
ances of ver
ery high concer
y high concer n)
n)..... 25
Switc
Switc h clock
h clock
Ac tivating........................................... 133
Overview............................................ 133
Setting................................................ 133
Setting the departure time.................. 134
Setting thete mp erature/operating
duration.............................................. 134
Switching immediate heating mode
on/o................................................. 134
Switc
Switc h-o. h-o.dela
delay time
y time
Exterior...............................................1 12
Interior............................................... 113
Switc
Switc hing air
hing air -r
-recir
ecir culation mode
culation mode on/o.
on/o..... 127
Switc
Switc hing
hingo.
o.engine
engine
see Vehicle
Switc
Switc hing on t
hing on t he ignition
he ignition
see Vehicle
Switc
Switc hing seat heating
hing seat heating on/o.
on/o. ..................... 96
Switc
Switc hing t
hing t he A/C function
he A/C function on/o.
on/o............. 125
Switc
Switc hing t
hing t he r
he rear windo
ear windo w heat
w heater
eron/o.
on/o. ... 128
Switc
Switc hing t
hing t he r
he rese
eset function
t function on/o.
on/o.
(contr
(contr ol panel)
ol panel) .......................................... 127
Syst
Syst em se
em se ttings
ttings
Overview of the system settings
menu..................................................1 99
Re set function (MBUX multimedia
system)............................................... 202
Syst
Syst em se
em se ttings
ttings
see Language T
T
T
T able
able
see Folding table
T
T ail lam
ail lam ps (r
ps (replacing bulbs)
eplacing bulbs) ....................... 115
T
T ailg
ailg ate
ate
Ad justing.............................................. 61 Ind
ex
327
327