MINI Clubman 2016 Service Manual

If the split doors are opened with no-touch ac~
tivation, locked doors are not unlocked.
Safety
information WARNING
During no-contact activation of the split
doors, vehicle parts may be touched, e.g. hot
exhaust system. There is risk of injuries. With
the foot motion, make sure there is steady stance and do not touch the vehicle. '

Depending on your vehicle's equipment and
the country version, it is possible to specify
whether the doors are also unlocked when un~ locking with the remote control. Create the set~tings, refer to page 44.
Safety
information WARNING
Body parts can be jammed when operat~
ing the split doors. There is risk of injuries. Make sure that the area of movement of thesplit doors is clear during opening and clos~ing. '

If several drivers use their own remote control,
the vehicle will adjust the personal settings dur~
ing unlocking. These settings are also restored, if the vehicle has been used in the meantimeby a person with a different remote control.
Changes to the settings are automatically saved
in the profile currently activated.
If another profile is selected via the onboard monitor, the settings saved in it will be applied
automatically. The new profile is assigned to
the remote control currently used.
There is an additional profile available that is
not assigned to any remote control: It can be
used to apply settings in the vehicle without
changing the personal profiles.
Settings
The settings for the following systems and func~
tions are saved in the active profile. The scope
of storable settings depends on country and
equipment.'

On the Control Display:1. "Settings"2."Profiles"
The current profile is selected.3.Open "Options".4."Reset current profile"
Exporting
profiles
Most settings of the active profile can be ex~
ported.
This can be helpful for securing and retrieving personal settings, before delivering the vehicle
to a workshop, e.g. Profiles can be taken to an~ other vehicle equipped with the Personal Pro~
file function.
Export is made via the USB port to a USB stor~
age device.
Popular file systems for USB media are sup~ ported. FAT32 and exFAT are the recom~
mended formats for profile export. Other for~
mats may not support the export.
1. "Settings"2."Profiles"3."Export profile"4."USB device"
Importing
profiles
Profiles stored on a USB device can be im~
ported via the USB interface.
Existing settings are overwritten with the im~
ported profile.
1. "Settings"2."Profiles"3."Import profile"4."USB device"Display
profile
list
during
start
The profile list can be displayed during each start to select the desired profile.1. "Settings"2."Profiles"3.Open "Options".4."Display user list at startup"
Settings
General
information Depending on your vehicle's equipment and
the country version, various settings for open~ ing and closing are possible.
These settings are saved in the active driver
profile, refer to page 42.
Unlock
Doors
1. "Settings"2."Doors/key"3. Select the symbol.4.Select the desired function.'

The split doors are opened and the
doors unlocked.
Lock
1. "Settings"2."Doors/key"3.Select the desired setting.'

Split
doors
with
the
alarm
system
switched
on
The split doors can be opened even when the alarm system is switched on.
After the split doors are closed, they are locked and monitored again when the doors are
locked. The hazard warning system flashes once.
Panic
mode
You can trigger the alarm system if you find
yourself in a dangerous situation.
Press button on the remote control forat least 3 seconds.
To switch off the alarm: press any button.
Signals
of
the
indicator
lamps'

Power
windowsGeneral
information
If an accident of a certain severity occurs, the
windows are automatically closed except a
gap.
Safety
information WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of
injury or risk of property damage. Make sure
that the area of movement of the windows is
clear during opening and closing. '

Closing
without
the
pinch
protection
system
In case of danger from the outside or if ice
might prevent normal closing, proceed as fol~ lows:1. Pull the switch past the resistance
point and hold it there.
The pinch protection is limited and the win~ dow reopens slightly if the closing force ex~
ceeds a certain threshold.2. Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection.
Safety
switch
General
information
The opening and closing of the rear window
can be blocked via the safety switch for the rear. This makes sense, e.g., if children or ani~mals are carried in the rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Overview
Switching
on
and
off Press button.
The LED lights up if the safety function
is switched on.
Malfunction
General
information
In certain situations a window can only be op~
erated to a limited extent.'

Depending on the equipment, the window
opens and closes one or twice after approx. 15 seconds.4.Release switch.
Panoramic
glass
sun

Comfort
position
If the glass sunroof stops before it is completely
opened, it is in the Comfort position. In this po~
sition the wind noises in the interior are the
least.
If desired, continue the movement by Pressing the switch.
Closing
glass
sunroof
With
the
glass
sunroof
open'