MINI Clubman 2016 Manual PDF

'

Safety
informationWARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acci~ dent. Before exiting, secure the vehicle against
rolling.
In order to ensure that the vehicle is secured
against rolling away, observe the following:'

There is a risk of accidents or injuries. Do notleave children or animals unattended in the ve~hicle. Take the remote control with you when
exiting and lock the vehicle. '

Triple
turn
signal
activation
Lightly tap the lever up or down.
The turn signal flashes three times. The function can be activated or deactivated.On the Control Display:1. "Settings"2."Lighting"3."Triple turn signal"
Settings are stored for the driver profile cur~
rently used.
Signaling
briefly
Press the lever to the resistance point and hold
it there for as long as you want the turn signal
to flash.
MalfunctionUnusually rapid flashing of the indicator lampindicates that a turn signal bulb has failed.
High
beams,
headlight
flasher Push the lever forward or pull it backward.
'

Switching
off
and
brief
wipe
Press the lever down.
'

Windshield
washer
system
Safety
information WARNING
The washer fluid can freeze onto the win~
dow at low temperatures and obstruct the
view. There is a risk of an accident. Only use the washer systems, if the washer fluid cannot
freeze. Use antifreeze, if needed. '

wipers are in the folded away state and thewipers are folded in when switching on. '

Overview
The washer fluid reservoir is located in the en~gine compartment.
Malfunction
The use of undiluted windshield washer con~ centrate or alcohol-based antifreeze can lead
to incorrect readings at temperatures below
+ 5 

N
Neutral
The vehicle may roll. Use in automatic car
washes, for example.
P
Park
Select only when the vehicle is stationary. The drive wheels are blocked.
Before exiting the vehicle, make sure that se~
lector lever position P is set. Otherwise, the ve~
hicle may begin to move.
Kickdown Kickdown is used to achieve maximum drivingperformance. Step on the accelerator pedal be~yond the resistance point at the full throttle po~sition.
Engaging
selector
lever
positions
General
information
To prevent the vehicle from creeping after you select a gear, maintain pressure on the brakepedal until you are ready to start.
The selector lever can only be taken out of se~
lector lever position P if the ignition is on or the
engine is running.
With the vehicle stationary, depress the brake
pedal before shifting out of selector lever posi~ tion P or N; otherwise, the shift block will not bedeactivated and the shift command will not beexecuted.
Releasing
the
selector
lever
lock
A lock prevents the inadvertent switching to se~
lector lever position P or R or the inadvertent
change from selector lever position P.
To release the lock: with the brake pedal de~ pressed, press the button on the front of the
selector lever, see arrow.
Sport
program
and
manual
mode
M/S
Activating
the
sport
program
Press the selector lever to the left out of selec~
tor lever position D.
The engaged gear is displayed in the instru~ ment cluster, for example, S1.
The sport program of the transmission is acti~
vated.
Activating
the
M/S
manual
mode
1.Press the selector lever to the left out of se~
lector lever position D.2.Push the selector lever forward or back~
ward.
Manual mode M/S becomes active and the gear
is changed.
The engaged gear is displayed in the instru~ ment cluster, for example, M1.
Seite 79DrivingCONTROLS79
Online Edition for Part no. 01 40 2 972 253 - VI/16

If the situation requires, the Steptronic trans~
mission continues to shift automatically.
Example: once maximum engine speed is at~
tained, M/S manual mode is automatically up~
shifted as needed.
Switching
to
manual
mode'