MINI Clubman 2017 Owner's Manual

Display in the instrument cluster lights
up. The current speed is adopted as de~ sired speed and displayed with symbol.
Cruise control is active and maintains the set speed.
DSC will be switched on if needed.
Switching
off With the Stop&Go function for Steptronic trans~
missions: when switching off while stationary,
depress the brake pedal simultaneously.
Press button on the steering wheel.
The displays go out. The stored desired speed is
deleted.
Interrupting
manually Press button on the steering wheel.
With the Stop&Go function for Step~
tronic transmissions: when interrupting while stationary, depress the brake pedal simultane~
ously.
Interrupting
automatically The system is automatically interrupted in the
following situations:'

Adjusting
distance
Safety
information WARNING
The system does not release from the
personal responsibility. Due to the system lim~ its, braking can be late. There is a risk of acci~
dents or risk of property damage. Be aware to the traffic situation at all times. Adjust the dis~
tance to the traffic and weather conditions and maintain the prescribed safety distance, possi~
bly by braking. '

'

DecelerationThe system also does not decelerate in the fol~lowing situations:'

Engine
power
The desired speed may not be maintained on
uphill grades if engine power is insufficient.
Malfunction A Check Control message is displayed if the sys~
tem fails or was automatically deactivated.
The system may not be fully functional in the
following situations:'

Switching
on/off
and
interrupting
cruisecontrol
Switching
on Press button on the steering wheel.
The indicator lamp in the instrument cluster lights up.
The current speed is adopted as the de~ sired speed and is displayed with the symbol in the instrument cluster.
Cruise control is active and maintains the set
speed.
DSC will be switched on if needed.
Switching
off Press button on the steering wheel.
The displays go out. The stored desired speed is deleted.
Interrupting
manually When active, press the button on the
steering wheel.
Automatic
interruption
The system is automatically interrupted in the
following situations:'

Continuing
cruise
control
General
information
An interrupted cruise control can be continued
by calling up the stored speed.
Make sure that the difference between current speed and stored speed is not too large beforecalling up the stored speed. Otherwise, unin~tentional braking or accelerating may occur.
Calling
up
stored
speed Press button on the steering wheel.
The stored speed is reached and maintained.
Displays
in
the
instrument
cluster
Indicator
lamp Depending on how the vehicle is equip~ped, the indicator lamp in the instru~
ment cluster indicates whether the sys~
tem is switched on.
Desired
speed
and
stored
speed The desired speed is displayed together
with the symbol.'

and actively intervene in the respective situa~
tions. '

WARNING
Signal
tones
When approaching an object, an intermittent
sound indicates the position of the object. E.g., if an object is detected to the left rear of the ve~
hicle, a signal tone sounds from the left rear
speaker.
The shorter the distance to the object, the
shorter the intervals.
If the distance to a detected object is less than
approx. 10 inches/25 cm, a continuous tone is
sounded.
With front PDC: if objects are simultaneously lo~
cated both in front of and behind the vehicle,
an alternating continuous signal is sounded.
The signal tone is switched off, when selector
lever position P is engaged on vehicles with Steptronic transmission.
Volume
The ratio of the PDC signal tone volume to the
entertainment volume can be adjusted.
Via the onboard monitor:1. "Multimedia", "Radio" or
"Settings"2."Tone"3."Volume settings"4."PDC"5.To adjust: turn the controller.6.To store: press the controller.
Settings are stored for the profile currently
used.
Visual
warning The approach of the vehicle to an object can beshown on the Control Display. Objects that are
farther away are already displayed on the Con~ trol Display before a signal sounds.
A display appears as soon as Park Distance
Control (PDC) is activated.
The range of the sensors is represented in col~
ors: red, green and yellow.
When the image of the rearview camera is dis~
played, the switch can be made to PDC:
"Rear view camera"
System
limits
Safety
information WARNING
The system can react incorrectly or not at
all due to the system limits. There is a risk of ac~
cidents or risk of property damage. Observe the information regarding the system limits and ac~tively intervene, if needed. '

'