MINI Clubman 2018 Owner's Manual

LED
tail
lights
in
the
split
doors1Turn signal2Tail lights3Rear fog light4Reversing lights
Tail
lights
in
bumpers
1Tail lights/brake lights2Turn signal
In addition, the tail lights in the bumper assumethe functions of tail light and turn signals, if the
split doors are open.
Tail
lights
in
split
doors
Note the safety information on lights and bulbs,
refer to page 246.
Turn
signals/tail
lights
Bulbs: P21W/W5W1.Open the split doors.2.Remove left or right cover. If necessary, it is then possible to pry the cover off using ascrewdriver or a similar plastic tool.3.Press the latches together upward, arrow 1,and remove the bulb holder.
Loosen the plug connector, arrow 2, on the
bulb holder.4.Remove the bulb holder from the opening.5.Press the nonworking bulb gently into the socket, turn counterclockwise and remove.'

'

3.Pull the screwdriver blade from the handleand place it on the recessed-head screw
head in the bumper.4.Attach the screw driver handle with the slot to the blade, arrow 1.5.Loosen screw in the bumper, arrow 2.6.Pull tail light from the bumper.7.Turn the bulb holder counter-clockwise and
remove nonworking bulb.8.To insert the new bulb and install the tail
light, proceed in reverse order of removal.
Make sure that the bulb holder sits tight in
the tail light.
Central
brake
light
and
license
plate lights
Follow the general instructions on lights and
bulbs, refer to page 246.
The lights feature LED technology. In the case
of a malfunction, contact a dealer

'

The battery may need to be charged in the fol~lowing cases:'

Breakdown
assistanceVehicle
features
and
op

NOTE
In the case of body contact between the
two vehicles, a short circuit can occur during
jump-starting. There is a risk of damage to property. Make sure that no body contact oc~
curs. '

Tow-starting
and
towing
Safety
information WARNING
Due to system limits, individual functions
can malfunction during tow-starting/towing
with the Intelligent Safety systems activated.
There is a risk of an accident. Switch all Intelli~
gent Safety systems off prior to tow-starting/
towing. '

Tow
truck
The vehicle should only be transported on a
loading platform.
NOTE
The vehicle can become damaged when
lifting and securing it.
There is a risk of damage to property.
'

With
ALL4
Have your vehicle transported on a flatbed sur~
face only
NOTE
The vehicle can be damaged when tow~
ing the vehicle with a single lifted axle. There is a risk of damage to property. The vehicle
should only be transported on a loading plat~
form. '