MINI Clubman 2018 Repair Manual

Resetting
a
driver
profileThe settings of the driver profile currently in use
are reset to their factory settings.
Via the Central Information Display (CID):1. "My MINI"2."Driver profiles"3.Select driver profile.
The driver profile marked with this sym~
bol can be reset.
4."Reset driver profile"5."OK"
Exporting
driver
profiles
Most settings of the active driver profile can be
exported.
Exporting is helpful when storing and retrieving
personal settings, for instance before delivering
the vehicle to a workshop. The stored driver
profiles can be taken into another vehicle.
Via the Central Information Display (CID):
1. "My MINI"2."Driver profiles"3.Select driver profile.
The driver profile marked with this sym~
bol can be exported.
4."Export driver profile (USB)"
Select USB storage device as needed.
Importing
driver
profiles
Profiles stored on a USB storage device can be imported via the USB interface.
The existing settings of the active driver profile
are overwritten with the settings of the im~ ported driver profile.
Via the Central Information Display (CID):
1. "My MINI"2."Driver profiles"3.Select the driver profile to overwrite. The driver profile marked with this sym~
bol can be overwritten.4."Import driver profile (USB)"
Select USB storage device as needed.5.Select the driver profile to be imported.
Displaying
driver
profiles
during
start The driver profiles can be displayed during eachstart to select the desired profile.
Via the Central Information Display (CID):
1. "My MINI"2."Driver profiles"3."Show driver profiles at startup"
System
limits
A clear assignment between the remote control and driver may not be possible in the following
cases, for example.
'

Unlocking
Doors Via the Central Information Display (CID):1. "My MINI"2."Vehicle settings"3."Doors/Key"4."Driver's door" or "All doors"5.Select desired setting:'

3."Doors/Key"4.Deactivate or activate the desired confir~
mation signals.'

locked. The hazard warning system flashesonce.
Panic
mode
You can trigger the alarm system if you find
yourself in a dangerous situation.'

Power
windowsGeneral
information
If an accident of a certain severity occurs, the
windows are automatically closed except a
gap.
Safety
information WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of
injury or risk of damage to property. Make sure that the area of movement of the windows is
clear during opening and closing. '

The window closes with limited jam protec~tion. If the closing force exceeds a specific
threshold, closing is interrupted.2. Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection.
Safety
switch
General
information
The safety switch in the driver's door can be
used to prevent children, for instance from
opening and closing the rear windows using the switches in the rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Switching
on/off Press button.
The LED lights up if the safety function
is switched on.
Malfunction
General
information
In certain situations a window can only be op~ erated to a limited extent.
'

Overview
Tilting
the
glass
sunroofPress back the switch up to or
beyond the resistance point and
release it.
The glass sunroof is raised.
Opening
glass
sunroof
When
the
glass
sunroof
is
closed Press the switch back beyond
the resistance point and release
it twice.
The glass sunroof is opened.
Pressing the switch again stops
the motion.
With
the
glass
sunroof
completely
raised
'

The glass sunroof opens slightly.Closing
without
the
jam
protectionsystem
If there is an external danger, proceed as fol~
lows:1.Push the switch forward past the resistance point and hold it.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a specific threshold, closing is interrupted.2.Push the switch forward again past the re~
sistance point and hold until the glass sun~
roof closes without jam protection. Make
sure that the closing area is clear.
Initializing
after
a
power
interruption
After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent. The system must
be initialized in this case. MINI recommends
having this work performed only by a dealer's
service center or another qualified service cen~
ter or repair shop.
Seite 68CONTROLSOpening
and
closing68
Online Edition for Part no. 01402983278 - X/17

SettingsVehicle
features
and
op

Forward/backward
Pull the lever and slide the seat in the desired
direction.
After releasing the lever, move the seat forward or back slightly making sure it engages prop~
erly.
Height
Pull the lever up or press it down as often as
needed to reach the desired height.
Backrest
tilt
Pull the lever and apply your weight to the
backrest or lift it off, as necessary.
Lumbar
support
The curvature of the seat backrest can be ad~
justed in a way that it supports the lumbar re~
gion of the spine. The lower back and the spine
are supported for upright posture.
Turn the wheel in order to increase or decrease the curvature.
Electrically
adjustable
seats
General
information The seat setting for the driver's seat is stored
for the profile currently used. When the vehicle is unlocked via the remote control, the position
is automatically retrieved if the function, refer to page 62, is activated for this purpose.
The current seat position can be stored using
the memory function, refer to page 76.
Overview
1Memory function2Lumbar support3Backrest tilt4Forward/backward, height, seat tiltSeite 70CONTROLSSettings70
Online Edition for Part no. 01402983278 - X/17