MINI COOPER 2018 Owners Manual

Information is displayed in the Info Display of
the instrument cluster.
Information
at
a
glance
Info
Display Repeatedly pressing the buttonon the turn signal lever calls upthe following information in the
Info Display:'

Engine
temperature
displayDisplays the current engine temperature, based
on a combination of coolant and engine oil
temperature. As soon as the optimum operat~ ing temperature has been attained, the indica~tor is in the center position.
If the engine oil or coolant, and thus the en~
gine, become too hot, a Check Control message is displayed too.
When the engine temperature is toohigh, a red indicator light is displayed.
When the engine oil temperature is too high, a red indicator light is displayed.
Check the coolant level, refer to page 229.
With
equipment
version
with
Head-up
Display
and
navigation:
distance
to
destination
The distance remaining to the destination is displayed if a destination is entered in the navi~
gation system before the trip is started.
The distance to the destination is adopted au~
tomatically.
With
equipment
version
with
Head-up
Display
and
navigation:
time
of
arrival
The estimated time of arrival is displayed if a
destination is entered in the navigation system before the trip is started.
The time must be correctly set.
Speed
Limit
Info Speed Limit Info shows the current maximum
permitted speed in the instrument cluster.
Onboard
Computer
on
the
Control Display
Concept The Onboard Computer displays different vehi~
cle data on the Control Display, such as average values.General
information
The vehicle features two types of Onboard
Computers.'

Sport
instruments
General
information
On the Control Display, values for power and
torque are displayed.
Displaying
sport
instruments
Via the Central Information Display (CID):1. "Vehicle info"2."Driving Excitement"3. "Sports instruments"
Via MINI Driving Modes switch:
1.Activate SPORT.2. "Driving Excitement"3. "Sports instruments"
Vehicle
state
The following vehicle and surrounding area
data is automatically checked and evaluated in succession:
'

Settings
on
the
Control
Display
Time
Setting
the
time1. "Settings"2."Time/Date"3."Time:"4.Turn the Controller until the desired hours
are displayed.5.Press the Controller.6.Turn the Controller until the desired mi~ nutes are displayed.7.Press the Controller.
The time is stored.
Setting
the
time
format
1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The time format is stored.
Date
Setting
the
date
1. "Settings"2."Time/Date"3."Date:"4.Turn the Controller until the desired day is
displayed.5.Press the Controller.6.Make the settings for the month and year.
The date is stored.
Setting
the
date
format
1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The date format is stored.
Language
Setting
the
language
1. "Settings"2."Language/Units"3."Language:"4.Select the desired language.
Settings are stored for the profile currently
used.
Setting
the
voice
dialog Voice dialog for the voice activation system, re~
fer to page 29.
Units
of
measurement
Setting
the
units
of
measurement
To set the units for fuel consumption, route/ distance and temperature:
1. "Settings"2."Language/Units"3.Select the desired menu item.4.Select the desired unit.
Settings are stored for the profile currently
used.
Brightness
Setting
the
brightness To set the brightness of the Control Display:
1. "Settings"2."Control display"3."Brightness at night"4.Turn the Controller until the desired bright~ness is set.5.Press the Controller.Seite 104CONTROLSDisplays104
Online Edition for Part no. 01402983336 - X/17

Settings are stored for the profile currently
used.
Depending on the light conditions, the bright~ ness settings may not be clearly visible.
LED
ring
on
the
central
instrument
cluster
ConceptThe LED ring displays light animations to repre~sent specific functions.
Basic
displays
Basic functions, for instance the tachometer, can be set to be displayed continually if so de~sired.
Event
displays
Functions that are only displayed temporarily,
for instance the volume or temperature set~
tings, can be set as event displays.
Several vehicle assistance functions can also be displayed on the LED ring. This display corre~sponds with the displays of the function in therespective display.
Example:
tachometer
Like the tachometer in the instrument cluster, the light animations of the tachometer's basic
display show the current RPMs and the respec~
tive RPM warning thresholds.
Display'

General
information
Follow the instructions for cleaning the Head-
up Display. For additional information, see the
chapter on care.
Safety
information WARNING
When extending and retracting the pro~
jection screen of the Head-up Display, body parts can be jammed. There is a risk of injury.
Make sure that the area of movement of the projection screen is clear during opening and
closing. '

Settings are stored for the profile currently
used.
Adjusting
the
height Via the Central Information Display (CID):1. "Settings"2."Head-Up Display"3."Height"4.Turn the Controller until the desired heightis reached.5.Press the Controller.
Settings are stored for the profile currently
used.
Setting
the
rotation The screen of the Head-up Display can be ro~
tated around its own axis.
Via the Central Information Display (CID):
1. "Settings"2."Head-Up Display"3."Rotation"4.Turn the Controller until the desired setting
is selected.5.Press the Controller.
Settings are stored for the profile currently
used.
Display
visibility The visibility of the displays in the Head-up Dis~play is influenced by the following factors:
'

Functional
requirements'

LightsVehicle
features
and
op

Canada:
roadside
parking
light
Concept The vehicle can be illuminated on one side.
Switching
on
With radio-ready state switched off, press the
lever either up or down past the resistance point for approx. 2 seconds.
Switching
off
Briefly press the lever to the resistance point in
the opposite direction.
Welcome
lights
and
headlight
courtesy
de