MINI COOPER 2018 Owners Manual

MaintenanceVehicle
features
and
op

dealer

Replacing
componentsVehicle
features
and
op

6.Insert and latch a new wiper blade in re~verse order.7.Fold down the wiper arm.
Rear
wiper
blade
1.Fold up and hold the wiper arm firmly.2.Turn the wiper blade all the way back.3.Push the wiper blade out of the fasteningby continuing to turn it all the way.4.Insert the new wiper blade by following the
steps in reverse order. The wiper blade
must engage audibly.5.Fold down the wiper arm.
Light/bulb
replacement
General
information
Lights
and
bulbs
Lights and bulbs make an essential contribution
to vehicle safety.
The manufacturer of the vehicle recommends that you have appropriate work performed by a dealer

Headlight
glass
Condensation can form on the inside of the ex~
ternal lights in cool or humid weather. When driving with the lights switched on, the conden~
sation evaporates after a short time. The head~ light glass does not need to be changed.
If despite driving with the headlights switched
on, increasing humidity forms, for instance wa~
ter droplets in the light, have the headlights checked.
Headlight
settingThe headlight adjustments can be affected bychanging lights and bulbs. After the headlight
adjustment was changed, have it checked and,
if necessary, corrected by a dealer

5.Remove the bulb from the headlight hous~ing.6.Insert the new bulb and install the cover in
the reverse order.
Turn
signal
Follow the general instructions on lights and
bulbs, refer to page 234.
Bulbs: PW24W
With white turn signal lights: PWY24W
1.Turn the steering wheel.2.Turn the lid counterclockwise, arrow 1, and remove.3.Unscrew the inner cover counterclockwise,and remove it.4.Pull bulb holder out of the bulb housing; ifneeded, loosen it with small tilting move~ments if possible.5.Pull the bulb out of the fixture.6.Insert the new bulb and install the cover in
the reverse order.
Parking
lights/fog
lights/daytime
running
lights
Follow the general instructions on lights andbulbs, refer to page 234.
Bulbs:
'

'

With white turn signal lights: PWY24W1.Turn the steering wheel.2.Turn the lid counterclockwise, arrow 1, andremove.3.Unscrew the inner cover counterclockwise,and remove it.4.Pull bulb holder out of the bulb housing; ifneeded, loosen it with small tilting move~ments if possible.5.Pull the bulb out of the fixture.6.Insert the new bulb and install the cover in
the reverse order.Tail
lights,
bulb
replacement
Overview
Vehicles
with
a
rear
fog
light1Side tail lights2Rear fog light3License plate light4Center brake light
Vehicle
with
two
rear
fog
lights
1Side tail lights2Rear fog lights3License plate light4Center brake lightSeite 238MOBILITYReplacing
components238
Online Edition for Part no. 01402983336 - X/17

Side
tail
lights1Brake lights/tail lights2Turn signal3Reversing lights
Side
LED
tail
lights
1Tail lights2Turn signal3Brake light4Reversing lights
Side
tail
lights
Follow the general instructions on lights and
bulbs, refer to page 234.
Bulbs: P21W1.Open the tailgate.2.Remove left or right cover.3.Through the opening, loosen the plug con~
nector, arrow 2 on the bulb holder.
Press the latches together, arrows 1, and
remove the bulb holder.4.Remove the bulb holder from the opening.5.Press the nonworking bulb gently into the socket, turn counterclockwise and remove.'

'