MINI COOPER CONVERTIBLE 2017 Owners Manual

the rain sensor, and will be displayed depend~ing on the situation.
With the navigation system, the system takes into account the information stored in the navi~
gation data and also displays speed limits pres~
ent on routes without signs.
Without a navigation system, the system is sub~
ject to limitations imposed by technology. Traf~
fic signs with speed limitations are detected
and displayed only. Speed limitations due to
entering or exiting towns, highway signs, etc.
are not displayed. Speed limits with extra text
characters are always displayed.
Safety
information WARNING
The system does not release from the
personal responsibility to correctly assess visi~ bility and traffic situation. There is a risk of an
accident. Adjust the driving style to the traffic
conditions. Watch traffic closely and actively in~ tervene in the respective situations. '

'

Information is displayed in the info display ofthe instrument cluster.
Information
at
a
glance
CID
(central
information
display) Repeatedly pressing the button
on the turn signal lever calls up the following information in the
CID (central information display):'

Engine
temperature
displayDisplays the current engine temperature, based
on a combination of coolant and engine oil
temperature. As soon as the optimum operat~ ing temperature has been attained, the indica~tor is in the center position.
If the engine oil or coolant, thus the engine, be~
come too hot, a Check Control message is dis~ played.
When the engine temperature is toohigh, a red indicator lamp is displayed.
When the engine oil temperature is too high, a red indicator lamp is displayed.
Check the coolant level, refer to page 216.
Always
Open
Timer The Always Open Timer displays the current
driving time and total driving time with the
convertible top open in minutes and hours.
Always Open Timer via the onboard monitor,refer to page 100.
Resetting
the
Always
Open
Timer
Resetting the current driving time: press button on the turn signal lever for approx. 2 seconds
with the driving times displayed.
With
equipment
version
with
Head-up
Display
and
navigation:
distance
to
destination
The distance remaining to the destination is
displayed if a destination is entered in the navi~
gation system before the trip is started.
The distance to the destination is adopted au~
tomatically.
With
equipment
version
with
Head-up
Display
and
navigation:
time
of
arrival
The estimated time of arrival is displayed if a destination is entered in the navigation systembefore the trip is started.
The time must be correctly set.
Speed
Limit
Info Further information, see chapter Speed Limit
Info.
Onboard
computer
on
the
Control
Display
Concept
The onboard computer displays different vehi~
cle data on the Control Display, such as average values.
General
information The vehicle features two types of onboard
computers.'

Resetting
the
onboard
computer
Via the onboard monitor:1. "Vehicle info"2."Onboard info"3."Consumpt." or "Speed"4."Yes"
Resetting
the
trip
computer Via the onboard monitor:
1. "Vehicle info"2."Trip computer"3."Reset": all values are reset.
"Automatically reset": all values are reset approx. 4 hours after the vehicle has cometo a standstill.
Driving
Excitement
The
concept
On the Control Display, sport instruments can be displayed, and the vehicle condition can be
checked before the use of the SPORT program.
Sport
instruments On the Control Display, values for power andtorque are displayed.
Displaying
sport
instrumentsVia the onboard monitor:
1. "Vehicle info"2."Driving Excitement"3. "Sports instruments"
Via MINI Driving Modes switch:
1.Activate SPORT.2. "Driving Excitement"3. "Sports instruments"Vehicle
state
The following vehicle and surrounding area
data is automatically checked and evaluated in succession:'

4.Turn the controller until the desired speedwarning is displayed.5.Press the controller.
Activating/deactivating
the
speed
warning
Via the onboard monitor:
1. "Settings"2."Speed"3."Warning"4.Press the controller.
Setting
your
current
speed
as
the
speed
warning
Via the onboard monitor:
1. "Settings"2."Speed"3."Select current speed"4.Press the controller.
Settings
on
the
Control
Display
Time
Setting
the
time
zone
1. "Settings"2."Time/Date"3."Time zone:"4.Select the desired time zone.
The time zone is stored.
Setting
the
time
1. "Settings"2."Time/Date"3."Time:"4.Turn the Controller until the desired hours
are displayed.5.Press the Controller.6.Turn the Controller until the desired mi~ nutes are displayed.7.Press the Controller.
The time is stored.
Setting
the
time
format
1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The time format is stored.
Date
Setting
the
date
1. "Settings"2."Time/Date"3."Date:"4.Turn the Controller until the desired day is
displayed.5.Press the Controller.6.Make the necessary settings for the month
and year.
The date is stored.
Setting
the
date
format
1. "Settings"2."Time/Date"3."Format:"4.Select the desired format.
The date format is stored.
Language
Setting
the
language
1. "Settings"2."Language/Units"3."Language:"4.Select the desired language.Seite 96CONTROLSDisplays96
Online Edition for Part no. 01 40 2 915 102 - X/16

Settings are stored for the profile currently
used.
Setting
the
voice
dialog Voice dialog for the voice activation system, re~
fer to page 27.
Units
of
measurement
Setting
the
units
of
measurement
To set the units for fuel consumption, route/ distance and temperature:1. "Settings"2."Language/Units"3.Select the desired menu item.4.Select the desired unit.
Settings are stored for the profile currently
used.
Brightness.
Setting
the
brightness To set the brightness of the Control Display:
1. "Settings"2."Control display"3."Brightness"4.Turn the Controller until the desired bright~ness is set.5.Press the Controller.
Settings are stored for the profile currently
used.
Depending on the light conditions, the bright~ ness settings may not be clearly visible.
LED
ring
on
the
central
instrument
cluster
The
concept
The LED ring displays light animations to repre~
sent specific functions.
Basic
displays
Basic functions, for example the tachometer,
can be set to be displayed continually if so de~ sired.
Event
displays
Functions that are only displayed temporarily,
for example the volume or temperature set~ tings, can be set as event displays.
Several vehicle assistance functions can also be displayed on the LED ring. This display corre~sponds with the displays of the function in the
respective display.
Example:
tachometer
Like the tachometer in the instrument cluster, the light animations of the tachometer's basic
display show the current RPMs and the respec~
tive RPM warning margins.
Display'

Adjusting
the
LED
ring
Via the onboard monitor:1. "Settings"2."Center Instrument"3."Basic display" or "Event display"4.Select the desired setting.
Setting
the
brightness The brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the onboard monitor:
1. "Settings"2."Center Instrument"3."Brightness"4.Turn the controller.
Settings are stored for the profile currently
used.
Head-up
Display
Concept This system projects important information into
the driver's field of vision, for instance the
speed.
The driver can get information without averting
his or her eyes from the road.
General
information
Follow the instructions for cleaning the Head-
up Display. For additional information, see the
chapter on care.
Safety
information WARNING
When extending and retracting the pro~
jection screen of the Head-up Display, body
parts can be jammed. There is a risk of injury.
Make sure that the area of movement of the
projection screen is clear during opening and
closing. '

Display
Overview
The following information is displayed on the Head-up Display:'

John
Cooper
Works:
sport
displays
in
the
Head-up
Display
General
information
The sport displays in the Head-up Display assist
with a sporty driving style.
Switching
on Via the onboard monitor:1. "Settings"2."Head-Up Display"3."Displayed information"4."Sport displays"
With navigation system: if the sport displays are
switched on, no navigation content will be dis~
played on the Head-up Display.
Display
1Speed2Shift point indicator3Gear display4Current engine speed5Warning field, speed
Shift
point
indicator
Concept
Shift point indicator in the Head-up Display in~
dicates the optimum shifting point. Thus, with a
sporty driving style, the best possible vehicle
acceleration is achieved.
Functional
requirements'