MINI COOPER CONVERTIBLE 2018 Owners Manual

9Seat heating, leftps61Climate
control
functions
in
detail
Switching
the
system
on/off Switching
on
Set any air flow.
Switching
off Turn the wheel for air flow all the
way to the left.
Temperature
Concept
The system heats or cools, depending on the
set temperature.
Settings Turn the ring to set the desired
temperature.
Air
conditioning
Concept
The air in the car's interior will be cooled and
dehumidified and, depending on the tempera~
ture setting, warmed again.
The car's interior can only be cooled with the engine running.
Switching
on/off Press button.
The LED is illuminated with air condi~
tioning switched on.Depending on the weather, the windshield may
fog up briefly when the engine is started.
The air conditioner produces condensation wa~
ter, refer to page 187, that will exit from below
the vehicle.
Recirculated-air
mode Concept
You may react to unpleasant odors or pollu~ tants in the immediate environment by tempo~ rarily suspending the supply of outside air. The
system then recirculates the air flow within the
vehicle.
Operation Press button repeatedly to select anoperating mode:'

OperationTurn the ring to set the desired
air flow.
The higher the air flow, the more effective the heating or cooling
will be.
The air flow from the air conditioner may be re~ duced automatically to save battery power.
Controlling
the
air
distribution
manually
Concept
The air distribution for climate control can be adjusted manually.
Operation Turn the wheel to select the de~
sired program or the desired in~ termediate setting.'

Automatic
climate
control1Temperature, left2Display3Air flow, AUTO intensity4AUTO program5Air distribution, manual6Display7Temperature, right8Seat heating, rightps619Maximum cooling10Air conditioning11Recirculated-air mode12Rear window defroster13Windshield defroster14Defrosting windows and removing conden~
sation15Seat heating, leftps 61Climate
control
functions
in
detail
Switching
the
system
on/off Switching
on
Set any air flow.Switching
off
Turn wheel for air flow to the left
until the control switches off.
Temperature
Concept
The automatic climate control achieves the set temperature as quickly as possible, if necessarySeite 163Climate
controlCONTROLS163
Online Edition for Part no. 01402983394 - X/17

by using the maximum cooling or heating
power, and then keeps it constant.
Settings Turn the ring to set the desired
temperature.
Do not rapidly switch between different tem~
perature settings. The automatic climate con~
trol will not have sufficient time to adjust the
set temperature.
Air
conditioning
Concept
The air in the car's interior will be cooled and
dehumidified and, depending on the tempera~ ture setting, warmed again.
The car's interior can only be cooled with the engine running.
Switching
on/off Press button.
The LED is illuminated with air condi~
tioning switched on.
Depending on the weather, the windshield may
fog up briefly when the engine is started.
The air conditioning is switched on automati~ cally with the AUTO program.
When using the automatic climate control, con~
densation water, refer to page 187, develops
and drains underneath the vehicle. This is nor~
mal.
Maximum
cooling
Concept
The system is set to the lowest temperature,
maximum air flow and recirculated-air mode.General
information
The function is available with external tempera~
tures beyond approx. 32 

Turn the ring to set the desired
intensity from soft to intensive.
The set intensity is displayed via the position of the illuminated LED segment.
Convertible
program
When the convertible top is open, the
convertible program is activated as well. In the
convertible program, the automatic climate
control is optimized for driving with the
convertible top open. In addition, the air flow is
increased as the vehicle speed increases.
The efficiency of the convertible program can
be greatly enhanced by installing the wind de~
flector.
Recirculated-air
mode
Concept
You may react to unpleasant odors or pollu~
tants in the immediate environment by tempo~
rarily suspending the supply of outside air. The
system then recirculates the air flow within the
vehicle.
Operation Press button repeatedly to select an
operating mode:'

Defrosting
windows
and
removing
condensation
Concept
Ice and condensation are quickly removed
from the windshield and the front side win~
dows.
Switching
on/off Press button.
The LED is illuminated with the system
switched on.
Ice and condensation are quickly removed
from the windshield and the front side win~
dows.
The air flow can be adjusted with the air flow
active.
If there is window condensation, switch on the
air conditioning too.
Windshield
defroster Press button. The LED lights up.The front window defroster switches
off automatically after a certain period of time.
Rear
window
defroster Press button. The LED lights up.
The rear window defroster switches off
automatically after a certain period of time.
When GREEN Mode is activated, the heater out~
put is reduced.
Microfilter/activated-charcoal
filter
In external and recirculated-air mode the mi~ crofilter/activated charcoal filter filters dust,
pollen, and gaseous pollutants out of the air.
Have this filter changed during vehicle mainte~ nance, refer to page 229.Ventilation
Setting
The air flow directions can be individually ad~
justed:'

Functional
requirements'

Interior
equipmentVehicle
features
and
op

proximately 20 seconds until the LED on
the interior mirror flashes. This erases all
programming of the buttons on the interior mirror.3.Hold the hand-held transmitter for the sys~
tem to be controlled approx. 1 to 3 in~
ches/2.5 to 8 cm away from the buttons of
the interior mirror. The required distance depends on the hand-held transmitter.4.Simultaneously press and hold the button
of the desired function on the hand-held
transmitter and the button to be program~
med on the interior mirror. The LED on the
interior mirror will begin flashing slowly.5.Release both buttons as soon as the LED
flashes more rapidly. The LED flashing
faster indicates that the button on the inte~
rior mirror has been programmed.
If the LED does not flash faster after at least 60 seconds, change the distance betweenthe interior mirror and the hand-held trans~
mitter and repeat the step. Several more
attempts at different distances may be nec~
essary. Wait at least 15 seconds between
attempts.
Canada: if programming with the hand- held transmitter was interrupted, hold
down the interior mirror button and repeat~
edly press and release the hand-held trans~
mitter button for 2 seconds.6.To program other functions on other but~
tons, repeat steps 3 to 5.
The systems can be controlled using the interior mirror buttons.
Special
feature
of
the
rolling
code
wireless
system
If you are unable to operate the system after repeated programming, please check if the sys~
tem to be controlled features a rolling code
radio system.
Read the system's owner's manual, or press the
programmed button on the interior mirror lon~
ger. If the LED on the interior mirror starts
flashing rapidly and then stays lit constantly for
2 seconds, the system features a rolling code
radio system. Flashing and continuous illumina~
tion of the LED will repeat for approximately
20 seconds.
For systems with a rolling code radio system,
the integrated Universal Remote Control and
the system also have to be synchronized.
Please read the owner's manual to find out
how to synchronize the system.
Synchronizing is easier with the aid of a second
person.
Synchronizing the universal remote control
with the system:1.Park the vehicle within range of the re~
mote-controlled system.2.Program the relevant button on the interior mirror as described.3.Locate and press the synchronizing button
on the system being programmed. You
have approx. 30 seconds for the next step.4.Hold down the programmed button on the interior mirror for approximately 3 secondsand then release it. If necessary, repeat this
step up to three times in order to finish syn~
chronization. Once synchronization is com~
plete, the programmed function will be car~
ried out.
Reprogramming
individual
buttons
1.Switch on the ignition.2.Press and hold the interior mirror button to
be programmed.3.As soon as the interior mirror LED starts
flashing slowly, hold the hand-held trans~
mitter for the system to be controlled ap~
prox. 1 to 3 inches/2.5 to 8 cm away from
the buttons of the interior mirror. The re~ quired distance depends on the hand-held
transmitter.Seite 169Interior
equipmentCONTROLS169
Online Edition for Part no. 01402983394 - X/17

4.Likewise, press and hold the button of the
desired function on the hand-held trans~ mitter.5.Release both buttons as soon as the interior
mirror LED flashes more rapidly. The LED
flashing faster indicates that the button on the interior mirror has been programmed.
The system can then be controlled by the
button on the interior mirror.
If the LED does not flash faster after at most 60 seconds, change the distance and re~
peat the programming starting with step 4.
Several more attempts at different distan~
ces may be necessary. Wait at least 15 sec~
onds between attempts.
Canada: if programming with the hand-
held transmitter was interrupted, hold
down the interior mirror button and repeat~
edly press and release the hand-held trans~
mitter button for 2 seconds.
Operation
WARNING
Body parts can be jammed when operat~
ing remote-controlled systems, such as the ga~
rage door, using the integrated Universal Re~
mote Control. There is a risk of injury or risk of
damage to property. Make sure that the area of
movement of the respective system is clear during programming and operation. Also follow
the safety information of the hand-held trans~
mitter. '