MINI COOPER CONVERTIBLE 2018 Owners Manual

Replacing
componentsVehicle
features
and
op

6.Insert and latch a new wiper blade in re~verse order.7.Fold down the wiper arm.
Light/bulb
replacement
General
information
Lights
and
bulbs
Lights and bulbs make an essential contribution
to vehicle safety.
The manufacturer of the vehicle recommends that you have appropriate work performed by a dealer

Front
halogen
lights,
bulb
replacement
Overview
Halogen
headlights1Low beams/high beams2Turn signal
Bug
light
1Parking lights2Daytime running lights3Fog lights
Low
beams/high
beams Follow the general instructions on lights and
bulbs, refer to page 232.
Bulbs: H41.Open the hood, refer to page 222.2.Turn the lid counterclockwise, arrow, and
remove.3.Pull off the connector.4.Unclip spring clip, arrow, and fold down.5.Remove the bulb from the headlight hous~ ing.6.Insert the new bulb and install the cover in
the reverse order.
Turn
signal
Follow the general instructions on lights and
bulbs, refer to page 232.
Bulbs: PW24W
Seite 233Replacing
componentsMOBILITY233
Online Edition for Part no. 01402983394 - X/17

With white turn signal lights: PWY24W1.Turn the steering wheel.2.Turn the lid counterclockwise, arrow 1, andremove.3.Unscrew the inner cover counterclockwise,and remove it.4.Pull bulb holder out of the bulb housing; ifneeded, loosen it with small tilting move~ments if possible.5.Pull the bulb out of the fixture.6.Insert the new bulb and install the cover in
the reverse order.Parking
lights/fog
lights/daytime
running
lights
Follow the general instructions on lights andbulbs, refer to page 232.
Bulbs:'

'

With white turn signal lights: PWY24W1.Turn the steering wheel.2.Turn the lid counterclockwise, arrow 1, andremove.3.Unscrew the inner cover counterclockwise,and remove it.4.Pull bulb holder out of the bulb housing; ifneeded, loosen it with small tilting move~ments if possible.5.Pull the bulb out of the fixture.6.Insert the new bulb and install the cover in
the reverse order.Tail
lights,
bulb
replacement
Overview
Vehicles
with
a
rear
fog
light1Side tail lights2Rear fog light3License plate light4Center brake light
Vehicle
with
two
rear
fog
lights
1Side tail lights2Rear fog lights3License plate light4Center brake lightSeite 236MOBILITYReplacing
components236
Online Edition for Part no. 01402983394 - X/17

Side
tail
lights1Brake lights/tail lights2Turn signal3Reversing lights
Side
LED
tail
lights
1Tail lights2Turn signal3Brake light4Reversing lights
Side
tail
lights
Follow the general instructions on lights and
bulbs, refer to page 232.
Bulbs: P21W1.Opening tailgate.2.Remove left or right cover.3.Through the opening, loosen the plug con~
nector, arrow 2 on the bulb holder.
Press the latches together, arrows 1, and
remove the bulb holder.4.Remove the bulb holder from the opening.5.Press the nonworking bulb gently into the socket, turn counterclockwise and remove.'

'

The wire is long enough to guide the socketdown and through between any heat shield
that may be installed and the bumper.4.Replace nonworking bulb.5.To install the new bulb, proceed in reverse
order of removal.
Right fog light:
1.Turn the bulb socket counterclockwise and
remove.
The wire is long enough to guide the socket down and through between any heat shield
that may be installed and the bumper.2.Replace nonworking bulb.3.To install the new bulb, proceed in reverse
order of removal.
Side
turn
signal,
bulb
replacement
Follow the general instructions on lights and
bulbs, refer to page 232.
Bulbs:
'

Vehicle
batteryMaintenance
The battery is maintenance-free.
The added amount of acid is sufficient for the
service life of the battery.
More information about the battery can be re~
quested from a dealer