MINI Countryman 2018 Repair Manual

'

Functional
requirementsFor the system to be able to identify the driver
profile associated to a particular driver, the de~
tected remote control must be clearly allocated to the driver.
This is the case when:'

3.Select driver profile.
The driver profile marked with this sym~
bol can be renamed.
4."Change driver profile name"5.Enter profile name.6. Select the symbol.
Resetting
a
driver
profile
The settings of the driver profile currently in use
are reset to their factory settings.
Via the Central Information Display (CID):
1. "My MINI"2."Driver profiles"3.Select driver profile.
The driver profile marked with this sym~
bol can be reset.
4."Reset driver profile"5."OK"
Exporting
driver
profiles
Most settings of the active driver profile can be
exported.
Exporting is helpful when storing and retrieving
personal settings, for instance before delivering
the vehicle to a workshop. The stored driver
profiles can be taken into another vehicle.
Via the Central Information Display (CID):
1. "My MINI"2."Driver profiles"3.Select driver profile.
The driver profile marked with this sym~
bol can be exported.
4."Export driver profile (USB)"
Select USB storage device as needed.
Importing
driver
profiles
Profiles stored on a USB storage device can be imported via the USB interface.
The existing settings of the active driver profile
are overwritten with the settings of the im~ ported driver profile.
Via the Central Information Display (CID):1. "My MINI"2."Driver profiles"3.Select the driver profile to overwrite.
The driver profile marked with this sym~
bol can be overwritten.
4."Import driver profile (USB)"
Select USB storage device as needed.5.Select the driver profile to be imported.
Displaying
driver
profiles
during
start The driver profiles can be displayed during eachstart to select the desired profile.
Via the Central Information Display (CID):
1. "My MINI"2."Driver profiles"3."Show driver profiles at startup"
System
limits
A clear assignment between the remote control and driver may not be possible in the following
cases, for example.
'

Settings
General
information Depending on your vehicle's equipment and
the country version, various settings for open~ ing and closing are possible.
These settings are stored for the driver profile,
refer to page 61, currently used.
Unlocking
Doors Via the Central Information Display (CID):1. "My MINI"2."Vehicle settings"3."Doors/Key"4."Driver's door" or "All doors"5.Select desired setting:'

After the engine is switched off by pressing
the Start/Stop button, the locked vehicle is
automatically unlocked.
Confirmation
signals
from
the
vehicle
Via the Central Information Display (CID):
1. "My MINI"2."Vehicle settings"3."Doors/Key"4.Deactivate or activate the desired confir~
mation signals.'

After the tailgate is closed, it is locked andmonitored again provided the doors are
locked. The hazard warning system flashes once.
Panic
mode
You can trigger the alarm system if you find
yourself in a dangerous situation.'

Power
windowsGeneral
information
If an accident of a certain severity occurs, the
windows are automatically closed except a
gap.
Safety
information WARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of
injury or risk of damage to property. Make sure that the area of movement of the windows is
clear during opening and closing. '

The window closes with limited jam protec~tion. If the closing force exceeds a specific
threshold, closing is interrupted.2. Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection.
Safety
switch
General
information
The safety switch in the driver's door can be
used to prevent children, for instance from
opening and closing the rear windows using the switches in the rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Switching
on/off Press button.
The LED lights up if the safety function
is switched on.
Malfunction
General
information
In certain situations a window can only be op~ erated to a limited extent.
'

Overview
Tilting
the
glass
sunroofPress back the switch up to or
beyond the resistance point and
release it.
The glass sunroof is raised.
Opening
glass
sunroof
When
the
glass
sunroof
is
closed Press the switch back beyond
the resistance point and release
it twice.
The glass sunroof is opened.
Pressing the switch again stops
the motion.
With
the
glass
sunroof
completely
raised
'

The glass sunroof opens slightly.Closing
without
the
jam
protectionsystem
If there is an external danger, proceed as fol~
lows:1.Push the switch forward past the resistance point and hold it.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a specific threshold, closing is interrupted.2.Push the switch forward again past the re~
sistance point and hold until the glass sun~
roof closes without jam protection. Make
sure that the closing area is clear.
Initializing
after
a
power
interruption
After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent. The system must
be initialized in this case. MINI recommends
having this work performed only by a dealer's
service center or another qualified service cen~
ter or repair shop.
Seite 70CONTROLSOpening
and
closing70
Online Edition for Part no. 01402983567 - X/17