MINI Hardtop 2 Door 2017 Service Manual

Safety
informationWARNING
Body parts can be jammed when operat~
ing the tailgate. There is a risk of injury. Make sure that the area of movement of the tailgate
is clear during opening and closing. '

activated. All settings stored in the driver profile
are automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings dur~
ing unlocking. These settings are also restored, if the vehicle has been used in the meantimeby a person with a different remote control.
Changes to the settings are automatically saved
in the driver profile currently activated.
If another driver profile is selected via the on~
board monitor, the settings saved in it will be applied automatically. The new driver profile is
assigned to the remote control currently used.
There is an additional guest profile available
that is not assigned to any remote control: it
can be used to apply settings in the vehicle
without changing the personal driver profiles.
Functional
requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de~
tected remote control must be clearly allocated
to the driver.
This is the case when:'

The guest profile cannot be renamed. It is not
assigned to the current remote control.
Renaming
profiles
A personal name can be assigned to every pro~
file to avoid confusion between the profiles.
Via the onboard monitor:1. "Settings"2."Profiles"
The active profile is selected.3.Open "Options".4."Rename current profile"
Reset
profiles The settings of the active profile are reset totheir factory settings.
Via the onboard monitor:
1. "Settings"2."Profiles"
The current profile is selected.3.Open "Options".4."Reset current profile"
Exporting
profiles
Most settings of the active profile can be ex~
ported.
This can be helpful for saving and retrieving
personal settings, for instance before delivering
the vehicle to a workshop. Profiles can be taken to another vehicle equipped with the Personal
Profile function.
Export is made via the USB port to a USB stor~ age device.
Popular file systems for USB media are sup~ ported. FAT32 and exFAT are the recom~
mended formats for profile export. Other for~
mats may not support the export.
Via the onboard monitor:1. "Settings"2."Profiles"3."Export profile"4."USB device"
Importing
profiles
Profiles stored on a USB storage device can be
imported via the USB interface.
Existing settings are overwritten with the im~
ported profile.
Via the onboard monitor:
1. "Settings"2."Profiles"3."Import profile"4."USB device"
Display
profile
list
during
start
The profile list can be displayed during each start to select the desired profile.
Via the onboard monitor:
1. "Settings"2."Profiles"3.Open "Options".4."Display user list at startup"
System
limits
A clear assignment between the remote control and driver may not be possible in the following
cases, for example.
'

'

'

Avoiding
unintentional
alarms
General
information
The tilt alarm sensor and interior motion sensor
may trigger the alarm even though no one is trying to gain unauthorized access.
Possible situations for an unintended alarm:'

On
3-door
models
Opening
'

Overview
Switching
on
and
offPress button.
The LED lights up if the safety function
is switched on.
Malfunction
General
information In certain situations a window can only be op~
erated to a limited extent.
'

'

With
the
glass
sunroof
completely
raised
Press the switch forward beyond
the resistance point and release it.
The glass sunroof is closed.
Pinch
protection
system
General
information If the closing force exceeds a specific value as a
glass sunroof closes, the closing action is inter~
rupted.
The glass sunroof opens slightly.
Closing
without
the
jam
protection
system
If there is an external danger, proceed as fol~
lows:1.Push the switch forward past the resistance point and hold it.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a specific threshold, closing is interrupted.2.Push the switch forward again past the re~
sistance point and hold until the glass sun~
roof closes without jam protection . Make
sure that the closing area is clear.
Initializing
after
a
power
interruption
After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent. The system must
be initialized in this case. MINI recommends
having this work performed only by a dealer's
service center or another qualified service cen~
ter or repair shop.
Seite 50CONTROLSOpening
and
closing50
Online Edition for Part no. 01 40 2 915 044 - X/16