MINI Hardtop 2 Door 2018 Owner's Manual

'

Calling
up
stored
speed
and
distancePress button with the system inter~
rupted. Cruise control is continued with
the stored values. The selected distance is briefly displayed in the Info Display.
Switching
distance
control
on/off
Safety
information WARNING
The system does not react to traffic driv~
ing ahead of you, but instead maintains the stored speed. There is a risk of accidents or risk
of damage to property. Adjust the desired
speed to the traffic conditions and brake as
needed. '

Symbol flashes red and a signal sounds:
Brake and make an evasive maneuver, if necessary.
The system has been interrupted or dis~
tance control is temporarily suppressed because the accelerator pedal is being
pressed; a vehicle was not detected.
Distance control is temporarily sup~
pressed because the accelerator pedal
is being pressed; a vehicle was de~
tected.
Displays
in
the
Head-up
Display The information from Active Cruise Control can
also be displayed in the Head-up Display.
System
limits
Detection
range
The detection capacity of the system and the automatic braking capacity are limited.
Two-wheeled vehicles for instance might not be detected.
Deceleration
The system does not decelerate in the following
situations:
'

The system has a limited detection range. Sit~
uations can arise in tight curves where a vehicle driving ahead will not be detected or will be
detected very late.
When you approach a curve the system may
briefly report vehicles in the next lane due to
the bend of the curve. If the system decelerates
you may compensate it by briefly accelerating. After releasing the accelerator pedal the systemis reactivated and controls speed independ~
ently.
Weather
The following restrictions can occur under un~
favorable weather or light conditions:
'

WARNING
The use of the system can lead to an in~
creased risk of accidents in the following situa~ tions, for instance:'

The stored speed is displayed in the instrument
cluster.
DSC Dynamic Stability Control is switched on, if necessary.
The speed can also be stored as follows:
Press button.
Changing
the
speed
or button: press until the desired speed
is set.
If active, the displayed speed is stored and the
vehicle reaches the stored speed when the
road is clear.
'

'

With front PDC: automatic activation on obsta~
cle detection can be switched off. Via the Cen~ tral Information Display (CID):1. "Settings"2."Parking"3.Select setting.
The setting is stored for the driver profile
currently used.
Automatic
deactivation
during
forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
With
front
PDC:
switching
on/off
manually
Press park assistance button.
'

Limits
of
ultrasonic
measurement
Ultrasonic measuring might not function under
the following circumstances:'

ing style to traffic conditions. Watch traffic andvehicle surroundings closely and actively inter~
vene where appropriate. '