MINI Hardtop 2 Door 2018 Manual PDF

The ignition is activated automatically for a
brief time and is stopped as soon as the engine
starts.
Manual
transmission
Starting
the
engine1.Depress the brake pedal.2.Press on the clutch pedal and shift to neu~
tral.3.Press the Start/Stop button.
The ignition is activated automatically for a
brief time and is stopped as soon as the engine
starts.
Engine
stop
Safety
information WARNING
Unattended children or animals can
cause the vehicle to move and endanger them~
selves and traffic, for instance due to the fol~
lowing actions:
'

Depending on the selected driving mode, refer
to page 136, the system is automatically acti~
vated or deactivated.
Engine
stop
Functional
requirements The engine is switched off automatically during
a stop under the following conditions:
Manual transmission:'

Some indicator lights light up for a variedlength of time.
The engine can only be started via the Start/
Stop button.
Functional
limitations
Even if driving off was not intended, the deacti~
vated engine starts up automatically in the fol~ lowing situations:'

Parking
brakeSafety
information WARNING
An unsecured vehicle can begin to move
and possibly roll away. There is a risk of an acci~ dent. Before exiting, secure the vehicle against
rolling.
In order to ensure that the vehicle is secured
against rolling away, follow the following:'

3."Triple turn signal"
The setting is stored for the driver profile cur~
rently used.
Signaling
briefly
Press the lever to the resistance point and hold
it there for as long as you want the turn signal
to flash.
MalfunctionUnusually rapid flashing of the indicator lightindicates that a turn signal bulb has failed.
High
beams,
headlight
flasher Push the lever forward or pull it backward.
'

'

Cleaning
the
windshield
Pull the lever.
The system sprays washer fluid on the wind~ shield and activates the wipers briefly.
Windshield
washer
nozzles The washer jets are automatically heated
whenever the ignition is switched on.
Rear
window
wiper
Overview
Switching
on
the
rear
window
wiper
Turn the outer switch upward.
'

2.Press and hold the wiper level down, until
the wipers stop in a close to vertical posi~
tion.3.Fold the wipers all the way away from the
windshield.
Folding
down
the
wipers
After the wipers are folded back down, the
wiper system must be reactivated.
1.Fold the wipers back down onto the wind~
shield.2.Switch on the ignition.3.Push wiper lever down. Wipers return to
their resting position and are ready again for operation.
Canada
wiper
system
General
information
Do not use the wipers if the windshield is dry,
as this may damage the wiper blades or cause them to become worn more quickly.
Safety
information
WARNING
If the wipers start moving in the folded
away state, body parts can be jammed or dam~
age may occur to parts of the vehicle. There is a risk of injury or risk of damage to property.Make sure that the vehicle is switched off when
the wipers are in the folded away state and the
wipers are folded in when switching on. '

Switching
off
and
brief
wipe
Press the lever down.
'

Windshield
washer
system
Safety
information WARNING
The washer fluid can freeze onto the win~
dow at low temperatures and obstruct the
view. There is a risk of an accident. Only use the washer systems, if the washer fluid cannot
freeze. Use antifreeze, if needed. '