MINI Hardtop 4 Door 2018 Owner's Manual

"Obstacle marking"
If the vehicle is equipped accordingly, ob~
stacles are highlighted.
Pathway
lines
Pathway lines can be superimposed on the im~
age of the rearview camera.
Pathway lines help you to estimate the space
required when parking and maneuvering on level roads.
Pathway lines depend on the current steering angle and are continuously adjusted to the
steering wheel movements.
Turning
radius
lines
Turning radius lines can be superimposed on
the image of the rearview camera.
Turning radius lines show the course of the
smallest possible turning radius on a level road.
Only one turning radius line is displayed after
the steering wheel is turned past a certain an~
gle.
Obstacle
marking
If the vehicle is equipped accordingly, obstacle markings can be faded into the image of the
rearview camera.
The colored thresholds of the obstacle mark~
ings match the markings of the PDC Park Dis~ tance Control.
Parking
using
pathway
and
turning radius
lines
1.Position the vehicle so that the turning ra~
dius lines lead to within the limits of the
parking space.2.Turn the steering wheel to the point where the pathway line covers the corresponding
turning radius line.Seite 151Driving
comfortCONTROLS151
Online Edition for Part no. 01402983336 - X/17

Display
settings
Brightness
With the rearview camera switched on:1. Select the symbol.2.Turn the Controller until the desired setting
is reached and press the Controller.
Contrast
With the rearview camera switched on:
1. Select the symbol.2.Turn the Controller until the desired setting
is reached and press the Controller.
System
limits
Detection
of
objects
Very low obstacles or high, protruding objects
such as ledges may not be recognized by the system.
If the vehicle is equipped accordingly, certain
assistance functions also take into account data from PDC Park Distance Control.
Follow the notes in the PDC Park Distance Con~ trol chapter.
The objects displayed on the Control Display
may be closer than they appear. Therefore, do
not estimate the distance from the objects on
the display.
Parking
assistant
Concept
This system assists the driver in parking parallel
to the road.
General
information
Parking assistant handling is divided into three
steps:
'

NOTE
The parking assistant can steer the vehi~
cle over or onto curbs. There is a risk of damage
to property. Watch traffic closely and actively intervene where appropriate. '

Indicator
on
the
Control
Display
System
activated/deactivatedSymbolMeaning Gray: the system is not available.
White: the system is available but not activated. The system is activated.
Parking
space
search
and
system
status
'

'

Tire
sizeThe parking position may vary depending on
the tire size.
Malfunction A Check Control message is displayed.
The parking assistant failed. Have the system checked by a dealer

Climate
controlVehicle
features
and
op

9Seat heating, leftps57Climate
control
functions
in
detail
Switching
the
system
on/off Switching
on
Set any air flow.
Switching
off Turn the wheel for air flow all the
way to the left.
Temperature
Concept
The system heats or cools, depending on the
set temperature.
Settings Turn the ring to set the desired
temperature.
Air
conditioning
Concept
The air in the car's interior will be cooled and
dehumidified and, depending on the tempera~
ture setting, warmed again.
The car's interior can only be cooled with the engine running.
Switching
on/off Press button.
The LED is illuminated with air condi~
tioning switched on.Depending on the weather, the windshield may
fog up briefly when the engine is started.
The air conditioner produces condensation wa~
ter, refer to page 187, that will exit from below
the vehicle.
Recirculated-air
mode Concept
You may react to unpleasant odors or pollu~ tants in the immediate environment by tempo~ rarily suspending the supply of outside air. The
system then recirculates the air flow within the
vehicle.
Operation Press button repeatedly to select anoperating mode:'

OperationTurn the ring to set the desired
air flow.
The higher the air flow, the more effective the heating or cooling
will be.
The air flow from the air conditioner may be re~ duced automatically to save battery power.
Controlling
the
air
distribution
manually
Concept
The air distribution for climate control can be adjusted manually.
Operation Turn the wheel to select the de~
sired program or the desired in~ termediate setting.'

Automatic
climate
control1Temperature, left2Display3Air flow, AUTO intensity4AUTO program5Air distribution, manual6Display7Temperature, right8Seat heating, rightps579Maximum cooling10Air conditioning11Recirculated-air mode12Rear window defroster13Windshield defroster14Defrosting windows and removing conden~
sation15Seat heating, leftps 57Climate
control
functions
in
detail
Switching
the
system
on/off Switching
on
Set any air flow.Switching
off
Turn wheel for air flow to the left
until the control switches off.
Temperature
Concept
The automatic climate control achieves the set temperature as quickly as possible, if necessarySeite 160CONTROLSClimate
control160
Online Edition for Part no. 01402983336 - X/17