MINI Hardtop 4 Door 2018 Service Manual

4.Push battery in the direction of the arrow
using a pointed object and lift it out.5.Insert a type CR 2032 battery with the posi~
tive side facing up.6.Insert lid and cover.7.Push the integrated key into the remote
control until it engages.
Have old batteries disposed of by a
dealer

If the remote control is not detected, slightlychange the position of the remote control andrepeat the procedure.
Integrated
key
General
information The driver's door can be locked and unlocked
without remote control using the integrated key.
Safety
information WARNING
Unlocking from the inside is only possible
with special knowledge.
Persons who spend a lengthy time in the vehi~
cle while being exposed to extreme tempera~ tures are at risk of injury or death. Do not lock
the vehicle from the outside when there are
people in it. '

Overview
Buttons for the central locking system.Locking Press the button with the front doors
closed.
'

vehicle again. To unlock, the button on the
outer door handle must be pressed again.
This is the case whether the vehicle was locked
automatically after driving off or via the central locking system button from the inside.
Locking
On the driver's or front passenger's outer doorhandle, press the button.
Convenient
closing
Safety
information WARNING
With convenient closing, body parts can
be jammed. There is a risk of injury. Make sure
that the area of movement of the doors is clear
during convenient closing. '

MalfunctionRemote control detection by the vehicle may
malfunction under the following circumstances:'

Opening
from
the
insideWith Steptronic transmission:With the vehicle stationary, press the
button in the driver's floor area.
If the vehicle is locked, selector lever position P
must be engaged first.
With manual transmission:With the vehicle stationary, press the
button in the driver's floor area twice in quick
succession.
Closing
Recessed grips on the interior trim of the tail~
gate can be used to conveniently pull down the tailgate.
Personal
Profile
Concept
Via Personal Profiles, individual settings for sev~
eral drivers can be stored and called up again when required.
General
information There are three driver profiles with which per~
sonal vehicle settings can be stored. Every re~ mote control has one of these driver profilesassigned.
If the vehicle is unlocked using a remote con~ trol, the assigned personal driver profile will be
activated. All settings stored in the driver profile
are automatically applied.
If several drivers use their own remote control,
the vehicle will adjust the personal settings dur~
ing unlocking. These settings are also restored, if the vehicle has been used in the meantimeby a person with a different remote control.
Changes to the settings are automatically
stored in the driver profile currently activated.
If another driver profile is selected via the Cen~
tral Information Display (CID), the settings
stored in it will be applied automatically. The
new driver profile is assigned to the remote
control currently used.
There is an additional guest profile available that is not assigned to any remote control: it
can be used to apply settings in the vehicle
without changing the personal driver profiles.
Functional
requirements
For the system to be able to identify the driver
profile associated to a particular driver, the de~
tected remote control must be clearly allocated
to the driver.
This is the case when:'

'

Existing settings are overwritten with the im~
ported profile.
Via the Central Information Display (CID):1. "Settings"2."Profiles"3."Import profile"4."USB device"
Display
profile
list
during
start
The profile list can be displayed during each start to select the desired profile.
Via the Central Information Display (CID):
1. "Settings"2."Profiles"3.Open "Options".4."Display user list at startup"
System
limits
A clear assignment between the remote control and driver may not be possible in the following
cases, for example.
'

The vehicle locks automatically after a
short period of time if no door is
opened after unlocking.'

'