MINI Hardtop 4 Door 2018 Workshop Manual

Safety
informationWARNING
When operating the windows, body parts
and objects can be jammed. There is a risk of
injury or risk of damage to property. Make sure that the area of movement of the windows is
clear during opening and closing. '

Closing
without
the
jam
protection
system
In case of danger from the outside or if ice
might prevent normal closing, proceed as fol~ lows:1. Pull the switch past the resistance
point and hold it there.
The window closes with limited jam protec~ tion. If the closing force exceeds a specific
threshold, closing is interrupted.2. Pull the switch past the resistance
point again within approx. 4 seconds and
hold it there.
The window closes without jam protection.
On
5-door
models:
safety
switch
General
information
The safety switch in the driver's door can be
used to prevent children, for instance from
opening and closing the rear windows using the switches in the rear.
If an accident of a certain severity occurs, the
safety function is switched off automatically.
Switching
on/off Press button.
The LED lights up if the safety function
is switched on.
Malfunction
General
information
In certain situations a window can only be op~ erated to a limited extent.
'

Safety
informationWARNING
Body parts can be jammed when operat~
ing the glass sunroof. There is a risk of injury.
Make sure that the area of movement of the glass sunroof is clear during opening and clos~ing. '

With
the
glass
sunroof
completely
raised
Press the switch forward beyond
the resistance point and release it.
The glass sunroof is closed.
Jam
protection
system
General
information If the closing force exceeds a specific value as a
glass sunroof closes, the closing action is inter~
rupted.
The glass sunroof opens slightly.
Closing
without
the
jam
protection
system
If there is an external danger, proceed as fol~
lows:1.Push the switch forward past the resistance point and hold it.
The glass sunroof closes with limited jam
protection. If the closing force exceeds a specific threshold, closing is interrupted.2.Push the switch forward again past the re~
sistance point and hold until the glass sun~
roof closes without jam protection. Make
sure that the closing area is clear.
Initializing
after
a
power
interruption
After a power failure during the opening or
closing process, the glass sunroof can only be
operated to a limited extent. The system must
be initialized in this case. MINI recommends
having this work performed only by a dealer's
service center or another qualified service cen~
ter or repair shop.
Seite 54CONTROLSOpening
and
closing54
Online Edition for Part no. 01402983336 - X/17

SettingsVehicle
features
and
op

Forward/backward
Pull the lever and slide the seat in the desired
direction.
After releasing the lever, move the seat forward or back slightly making sure it engages prop~
erly.
Height
Pull the lever up or press it down as often as
needed to reach the desired height.
Backrest
tilt
Pull the lever and apply your weight to the
backrest or lift it off, as necessary.
Lumbar
support
The curvature of the seat backrest can be ad~
justed in a way that it supports the lumbar re~
gion of the spine. The lower back and the spine
are supported for upright posture.
Turn the wheel in order to increase or decrease the curvature.
Thigh
support
Pull the lever at the front of the seat and adjust
the thigh support.
In
3-door
models:
entering
the
rear
Safety
information WARNING
There is a risk of jamming when moving
the seats. There is a risk of injury or risk of dam~ age to property. Make sure that the area ofmovement of the seat is clear prior to any ad~
justment. '

WARNING
Unexpected movements of the backrest
while driving may occur due to an unlocked
backrest. Vehicle control could be lost. There is
a risk of injury. Fold back and lock the backrests before driving. '

The center safety belt buckle of the rear seat isintended for the person sitting in the middle.
General
information Always make sure that safety belts are beingworn by all occupants before driving off. Al~though airbags enhance safety by providingadded protection, they are not a substitute forsafety belts.
If needed, disengage the safety belt in the rear from the belt buckle on the side.
The upper shoulder strap's anchorage point will
be correct for adult seat occupants of every
build if the seat is correctly adjusted.
Safety
information WARNING
Use of a safety belt to buckle more than
one person will potentially defeat the ability of the safety belt to serve its protective func~
tion.There is a risk of injuries or danger to life.
Do not allow more than one person to wear a single safety belt. Infants and children are not
allowed on an occupant's lap, but must be transported and secured in designated child re~straint systems. '

2.Insert the tongue plate into the safety belt
buckle. The safety belt buckle must engage
audibly.
Unbuckling
the
safety
belt
1.Hold the safety belt firmly.2.Press the red button in the belt buckle.3.Guide the safety belt back into its roll-up
mechanism.
Safety
belt
reminder
for
driver's
seat
and
front
passenger
seat
Display
in
the
instrument
cluster The indicator light lights up and a signal
sounds. Make sure that the safety belts are positioned correctly. The safety belt
reminder can also be activated if objects are placed on the front passenger seat.
Front
head
restraints
Safety
information WARNING
A missing protective effect due to re~
moved or not correctly adjusted head restraints can cause injuries in the head and neck area.There is a risk of injury.
'

'