key MITSUBISHI 3000GT 1995 2.G Service Manual

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Remote Controlled Mirror Circuit321 ~
OPERATIONTROUBLESHOOTING HINTSI
Ll When teh remote controlled mirror switch isNeither right nor left mirror operates
operated while the ignition key is in “ACC” or
“ON” position, current flows through fuse No.1) Also cigarette lighter does not operateI
5 remote controlled mirror switch, remotel Check multi-prpose fuse No. 5.
controlled mirror, remote controlled mirror2) Cigarette lighter operates
switch, and ground, causing the mirror to move.l Check remote controlled mirror switch.
1 TSB RevisionI

Downloaded from www.Manualslib.com manuals search engine 428
CIRCUIT DIAGRAMS - Active Aero CircuitACTIVE
AERO CIRCUIT (UP TO 1993 MODELS)
TAILL:RELAY
1.25R-
EFATEDr@
p
G-
J/B
c
G-’
%Y”SWITCH
(D-29)
W
I
E
[GHTIGNITIONSWITCH(IG1)FUSIBLE LINK@
2B-W5W-B,,7 (c-82),,I (c-68)J/B 1 AI\
WHEN KEY
1IS REMOVED B-L R-B(F-27)I7---------------A-----
1
30
0.85R-E
R-B SI--
@
10A
-LL\IE
IIOD OR
STORAGE
CONNECTOR
(A-11X)
o”55L3 ----Yi -___------_--_-_______--9
W-lY-B (R-L) (L-W)Ii
,,l,,4,,2,,3
W-l;
W-l
W-l
Y-l
Y-\11
i
0
N
6
v
0
RHEOSTAT[
DATA LINK
CONNECTOR
(c-79)
i
v
SPEED
SENSOR
HR15h430AA
1 TSB Revision

Downloaded from www.Manualslib.com manuals search engine CIRCUIT DIAGRAMS - Active Aero Circuit431
FUSIB E
LINK 6b
J/B
i
@
10A
\,----(c-70)‘1 “2.
RR-Y(F)R-I
,\ 1,.2
IOD ORSTORAGE
CONNECTOR
(F)R-Br
'HEADLIGHT.FOG LIGHT'TAILLIGHTsPARKING,SIDE MARKER LIGHTtjW&ICENSE PLATE
J/B
(WE 'e
BUZZERIS REMOVEDDOME LIGHT.FOOT LIGHT ANDB-L
IGNITION KEYB-LCYLINDER10ILLUMINATIONLIGHT
.STARTINGB-L10jf#Pf~~ DOOR7r--- ----------------------_-
(Y-B
(Y-B
JRPOSE)
59
?jc
I
102
20
-----I/
LL--------19W-R1
.
I.ELECTRONIC
CONTROLNICSUSPENSION
W-R
Y-W
Y-W
MFI SYSTEM
2BBBR-B
451AA*
nDATA LINK CONNECTOR(F>Y
n
(c-79)
SPEED SENSOR
(A-11X)0(c-58) (c-68) 0773 OFRONT SIDE (c-81)(c-83)
(D-42)
(F-27)
HR15M31AB
TSB Revision

Downloaded from www.Manualslib.com manuals search engine ENGINE ELECTRICAL - Starting System16-21
<VEHICLES ‘WITH THEFT-ALARM SYSTEM (M/T)>
FUSIBLE LINK@
zJ==%~,
IGNITION
2B-k
iWITCH
B-L
B-l
2
B-j
4
2B-k1
(c-31:
2B-kJ/Br
rwER
(A-OSXII-
----------SrOFFON
2
G-B
(c-02
3
G-E
PEDAL&~#,;~ONB
28-k
IOD ORSTORAGE
CONNECTOR0.85B-Y
R-B
1 I------. BUZZER. MFI SYSTEM.DOME#T,. fl@+NG
LIGHT
AND IGNITION KEY
CYLINDER
ILLUMINATION LIGHT
2G-3130.85R-B
1E;$gAb;GHT AND
EW';RTMENT
i
R-B2B-Y
3B-F
20B-R
WHEN
KEY IS
REMOVED (B-23:
r-
'TE
!
LG-B
21Q
MOTOR
B-l
B-L-
*;~F$K& DOOR
.ACTWE AEROB-l
4EHE;iALARM
(c-65)
r
d
6
I
ms
(c-31)(c-56) (c-58)(c-64)
STARTER
mf3t7)(c-02)
HR02MOlAA
1 TSB Revision

Downloaded from www.Manualslib.com manuals search engine 16-22ENGINE ELECTRICAL - Starting System
<VEHICLES WITH THEFT-ALARM SYSTEM (AK)>I
#d ~
FUSIBLE LINK@IGNITIONf
T2B-k
(c-31:
1
iWITCH (ST)
.----11 1II
I1
I
1 1
3 /3
I.----A 2
2B-Y
B-Y
4ISTARTER
RELAY
@liB
MFI SYSTEM2B-Y
--____----------------.-*OFFON
2
G-B
IOD OR
STORAGE
CONNECTOR32B~yg$!y”IsE (c-02:
O.a5R-BR-B2B-Y
eQsCIAk;GHT AND
COMPARTMENT
LIGHT
3
'BUZZERPARK/
. f~[f,\6[!?.+~~ [#~f#hI
CYLINDER
ILLUMINATION
tIGHT(B-26)
L’\2'D-'
9:2
r’”
,:1R-i
NOTEXl FROM 1993 MODEL:2 1992 MODEL
'l.25B-W
MFI SYSTEM
2B-R
BATTERY(
2B-R
208-R(B-30)
3B-R
(B-23)1(B-24)
SUPPLEMENTAL
1gEyL&E"i I NT
h
STARTER ~0~0: WHEN
KEY IS
REMOVED
B-1
B-L
$FRIW& DOOR
.ACTIVE AEROB-I
*TWF;~ALARM
HR02M02AA
1 TSB Revision

Downloaded from www.Manualslib.com manuals search engine ENGINE ELECTRICAL - Starting System16-23
OPERATION
L
0For models equipped with the M/T, the clutch
pedal position switch contact is switched OFF
when the clutch pedal is depressed; when the
ignition switch is then switched to the “ST’ posi-tion, electricity flows to the starter relay and
the starter motor, the contact (magnetic switch)of the starter is switched ON and the starter
motor is activated.
NOTEIf the ignition switch is switched to the “ST
position without the clutch pedal being de-
pressed, electricity flows to the starter relay
(coil), the clutch pedal position switch (contacts)
and to ground, with the result that the contacts
of the starter relay are switched OFF, and, be-
cause the power to the starter motor is thereby
interrupted, the starter motor is not activated.lFor models equipped with the
AIT, when the
ignition switch is switched to the “ST’ position
while the selector lever is at the “P” or “N” posi-
tion, the contact (magnetic switch) of the starter
is switched ON and the starter motor is activated.
TROUBLESHOOTING HINTSThe starter motor does not operate at all.
l Check the starter (coil).
lCheck for poor contact at the battery terminals
and starter.l Check Park/Neutral position switch.
l Check clutch pedal position switch.
l Check starter relay.
l Check theft-alarm starter relay.
l Check key reminder switch.
i
/’
L&J
Fieldcoil wire
Iii?Stopper
IPinion gap
PinionZ6EL003
STARTER MOTORREMOVAL AND INSTALLATION
Refer to GROUP 22
- Manual Transaxle, or GROUP 23 -
Automatic Transaxle.INSPECTION
PINION GAP ADJUSTMENT(1) Disconnect field coil wire from M-terminal of magnetic
switch.
(2)Connect a 12 V battery between S-terminal and M-terminal.(3) Set switch to “ON”, and pinion will move out.
Caution
This test must be performed quickly (in less than 10
seconds) to prevent coil from burning.(4) Check pinion to stopper clearance (pinion gap) with a
feeler gauge.
Standard value: 0.5-2.0 mm (.020-,079 in.)
TSB Revision

Downloaded from www.Manualslib.com manuals search engine 54-1
CHASSIS
ELECTRICAL
CONTENTS
AERO PARTS (ACTIVE AERO).....Refer to GROUP 51
ANTI-LOCK BRAKING SYSTEM....
Refer to GROUP 35
BATTERY...........................................-3
ON-VEHICLE SERVICE............................3
Battery Charging.................................4Battery Inspection................................3Battery Testing Procedure........................5
SPECIFICATIONS................................-3
General Specifications............................3
CIGARETTE LIGHTER.............................119
CIGARETTE LIGHTER..........................123
SPECIFICATIONS..............................
119
General Specifications............I...........119
TROUBLESHOOTING............................120
COLUMN SWITCH.................................
.lll
COLUMN SWITCH*............................112
SPECIAL TOOL.................................111
SPECIFICATIONS...............................111
General Specifications..........................111
CRUISE CONTROL SYSTEM . . . . . . . Refer to GROUP 17
DOOR GLASS AND REGULATOR
(POWER WINDOWS) . . . . . . . . . . . . . .Refer to GROUP 42
DOOR HANDLE AND LATCH
(CENTRAL DOOR LOCKING) . . . . . . Refer to GROUP 42
DOOR MIRROR (ELECTRONIC
CONTROLLED MIRROR). . . . . . . . . . .Refer to GROUP 51
ELECTRONIC CONTROL
SUSPENSION . . . . . . . . . . . . . . . . . . . . Refer to GROUP
338
FRONT SEAT (POWER SEAT) . . . . Refer to GROUP 52A
HEATER AND AIR CONDITIONING . Refer to GROUP 55
HORN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115
HORN SWITCH* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118
RELAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
118
SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
115
General Specifications . . . . . . . . . . . . . . . . . . . . . . . .115
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . .115
KEYLESS ENTRY SYSTEM
(CENTRAL DOOR LOCKING) . . . . . . Refer to GROUP 42
CONTINUED ON NEXT PAGE
WARNINGS REGARDING SERVICING OF SUPPLEMENTAL RESTRAINT SYSTEM (SRS) EQUIPPED VEHICLES
WARNING!
(1) Improper service or maintenance of any component of the
SRS, or any SRS-related component, can lead to personal
injury or death to service personnel (from inadvertent firing of the air bag) or to the driver and passenger (from render-
ing the SRS inoperative).
(2) Service or maintenance of any SRS component or
SRS-related component must be performed only at an authorized
MITSUBISHI dealer.
(3)MITSUBISHI dealer personnel must thoroughly review this manual, and especially its GROUP 52B
TSupplemental Re-
straint System (SRS) and GROUP 00 -Maintenance Service before beginning any service or maintenance of any com-
ponent of the SRS or any
SRS-related component.
NOTE
The SRS includes the following components: impact sensors, SRS diagnosis unit, SRS warning light, air bag module, clock spring
and interconnecting wiring. Other SRS-related components (that may
h,a”” to be removed/installed in connection with SRS serviceor maintenance) are indicated in the table of contents by an asterisk ( ).

Downloaded from www.Manualslib.com manuals search engine 54-6CHASSIS ELECTRICAL - Ignition Switch
IGNITION SWITCHSPECIAL
TOOL
ToolTool number and nameSupersessionApplication
MB990803
Steering wheel pullerGeneral service toolRemoval of steering wheel
IGNITION SWITCHREMOVAL AND INSTALLATION
40 Nm29 ft.lbs.6 Nm
6
Steering lock cylinder removalsteps
Ignition switch segment removalsteps
1. Air bag module (Refer to GROUP 52B
4Ab
- Air Bag Module and Clock Spring.)3. Knee protector
2. Steering wheel(Refer to GROUP 52A - Instrument
3. Knee protector
Panel.)
LRedE;)to GROUP 52A - Instrument:i:4. Column cover, lower
5. Column cover, upper
:::4. Column cover, lower6. Lap cooler duct and foot shower duct
5. Column cover, upper10. Key reminder switch segment
6. Lap cooler duct and foot shower duct11. Ignition switch segment
,A+ 7. Column switch and clock springassembly
NW
8. Ignition key illumination ring
9. Steering lock cylinder
TSB Revision

Downloaded from www.Manualslib.com manuals search engine CHASSIS ELECTRICAL - Ignition Switch54-7REMOVAL SERVICE POINTS
+A, STEERING WHEEL REMOVAL
Remove the steering wheel by using the special tool.
Caution
Do not hammer on the steering wheel to remove it;
doing so may damage the collapsible mechanism.
Front of vehicles
219FO12:
+B,COLUMN COVER LOWER / COLUMN COVER
UPPER REMOVAL
After the screws have been removed, remove the covers,while making sure not to break the grippers.
+C, STEERING LOCK CYLINDER REMOVAL
(1) Insert the ignition key into the steering lock cylinderand place the key in the ACC position.
(2)Press the lock pin down with a Phillips head screwdriv-
er (small-size one) to remove the steering lock cylinder.INSTALLATION SERVICE POINT
.A+COLUMN SWITCH AND CLOCK SPRING
ASSEMBLY INSTALLATIONLine up the “NEUTRAL” mark of the clock spring with
the mating mark to center the clock spring.
CautionIf the clock spring is not centered, problems such
as intermediate failure of the steering wheel to turn,broken ribbon cable in the clock spring, or the like
could occur. As a result, they might hinder proper
operation of the SRS, resulting in serious injury.
iI
1 TSB RevisionI

Downloaded from www.Manualslib.com manuals search engine 54-8CHASSIS ELECTRICAL - Ignition Switch
216AO57000002296INSPECTION
IGNITION SWITCH CHECK
(1) Remove the knee protector, the column cover lower andd’
the column cover upper. (Refer to GROUP 52A - Instru-
ment Panel.)
(2) Disconnect the wiring connector from the ignition switch
and key reminder switch, and connect an ohmmeter to
the switch side connector.(3) Operate the switch, and check the continuity between
the terminals.
PositionKeyConnector AConnector B
LOCK
ACC
ON
START
ConnectorB
ignitionkey
illumina-
tion light
terminal
No.
415
LJ
TSB Revision