MITSUBISHI ASX 2019 Owner's Manual (in English)

Refer to “Information screen (when the
ignition switch or the operation mode is ON)” on page 5-10.CAUT,ONz For safety, stop the vehicle before operating.
While driving, even if you operate the multi- information meter switch, the function set- ting screen is not displayed.
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Type 1Type 2
NOTEz To return the menu screen to the function
setting screen, press and hold the multi-in-formation meter switch for about 2 seconds or more.
z If no operations are made within about 15
seconds of the menu screen being displayed, the display returns to the function setting
screen.
4. Select the item to change on the menu
screen and change to the desired setting. Refer to the following items for further
details on the operation methods.
Refer to “Changing the reset mode for
average fuel consumption and average speed” on page 5-19.
Refer to “Changing the fuel consump-
tion display unit” on page 5-21.
Refer to “Changing the temperature unit” on page 5-22.
Refer to “Changing the display lan-
guage” on page 5-22.
Refer to “Operation sound setting” on page 5-23.
Refer to “Changing the time until
“REST REMINDER” is displayed” on
page 5-23.
Refer to “Changing the turn-signal sound” on page 5-24.
Refer to “Changing the momentary fuel
consumption display” on page 5-25.
Refer to “Reset of low tyre pressure warning threshold” on page 6-69
Refer to “Tyre ID set change” on page 6-69
Refer to “Returning to the factory set- tings” on page 5-25.Changing the reset mode for
average fuel consumption andaverage speed
The mode conditions for the average fuel consumption and average speed display can
be switched between “Auto reset” and “Man- ual reset”.
Multi-information display
5-192*$((Instruments and controls5Type 1 Type 2

1.Press and hold the multi-information
meter switch for about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select “AVG” (average fuel
consumption and average speed setting).Type 1Type 23. Press and hold the multi-information
meter switch for about 2 seconds or more to switch in sequence from A or 1 (Auto reset mode)
W M, 2 or P (Manual
reset mode)
W A or 1 (Auto reset mode).
The setting is changed to the selected
mode condition.
Manual reset mode
z When the average fuel consumption and
average speed are being displayed, if
you hold down the multi-information
meter switch, the average fuel consump- tion and average speed displayed at that time are reset.
z When the following operation is per-
formed, the mode setting is automatical-
ly switched from manual to auto.
[Except vehicles equipped with keyless
operation system@
Turn the ignition switch from the “ACC”
or “LOCK” position to the “ON” posi-
tion.
[For vehicles equipped with the keyless operation system@ Change the operation
mode from ACC or OFF to ON.

Switching to auto occurs automatically.
If switching to manual mode is done, however, the data from the last reset isdisplayed.
Auto reset mode
z When the average fuel consumption and
average speed are being displayed, if
you hold down the multi-information
meter switch, the average fuel consump- tion and average speed displayed at that time are reset.
z When the engine switch or the operation
mode is in the following conditions, the
average fuel consumption display and
average speed display are automatically
reset.
[Except vehicles equipped with keyless
operation system@
The ignition switch is in the “ACC” or
“LOCK” position for about 4 hours or longer.
[For vehicles equipped with keyless op- eration system@
The operation mode is in ACC or OFF
for about 4 hours or longer.
NOTEz The average fuel consumption display and
average speed display can be reset individu- ally for the auto reset mode and manual reset
mode.
z The memory of the auto reset mode or man-
ual reset mode for the average fuel con-sumption display and average speed display
is erased if the battery is disconnected.
Multi-information display
5-202*$((Instruments and controls5

NOTEzThe initial (default) setting is “Auto reset
mode”.Changing the fuel consumption
display unit
The display unit for fuel consumption can be
switched. The distance, speed, and amount units are also switched to match the selected
fuel consumption unit. 1. Press and hold the multi-information
meter switch for about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera- tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select “AVG UNIT” (fuel consumption display setting).Type 1Type 2
3. Press and hold the multi-information
meter switch for about 2 seconds or more to display “AVG UNIT” (fuel con-
sumption display unit setting).
4. Lightly press the multi-information me-
ter switch to switch in sequence from
km/L
W L/100 km
W mpg (US)
W mpg
(UK)
W RETURN
W km/L.Type 1Type 2
5. Press and hold the multi-information
meter switch for about 2 seconds or more to change the setting to the selec-
ted unit.
NOTEz The display units for the driving range, the
average fuel consumption, the average speed and the momentary fuel consumption areswitched, but the units for the indicating
needle (speedometer), the odometer and the tripmeter will remain unchanged.
z The memory of the unit setting is erased if
the battery is disconnected, and it returns au- tomatically to L/100 km.
Multi-information display
5-212*$((Instruments and controls5

The distance and speed units are also switch-
ed in the following combinations to match the selected fuel consumption unit.Fuel con-
sumptionDistance (driving range)Speed
(average speed)L/100 kmkmkm/hmpg (US)mile(s)mphmpg (UK)mile(s)mphkm/Lkmkm/hChanging the temperature unit
The display unit for temperature can beswitched. 1. Press and hold the multi-information
meter switch for about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select “
” (temperature
unit setting).
Type 1Type 2
3. Press and hold the multi-information
meter switch for about 2 seconds or more to switch in sequence from

3.Press and hold the multi-information
meter switch for about 2 seconds or more to display “LANGUAGE” (lan-
guage setting).
4. Lightly press the multi-information me-
ter switch to select the desired language.
5. If you hold down the multi-information
meter switch for about 2 seconds or more, the setting is changed to the selec- ted language.NOTEz The memory of the language setting is
erased if the battery is disconnected, and it returns automatically to ENGLISH or RUS-
SIAN.
z If “---” is selected in the language setting, a
warning message is not displayed when there is a warning display or interrupt dis-
play.Operation sound setting
You can turn off the operation sounds of the
multi-information meter switch and daytime
dipper button. 1. Press and hold the multi-information
meter switch for about 2 seconds ormore to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select “
” (operation sound
setting).
3. Press and hold the multi-information
meter switch for about 2 seconds or more to switch in sequence from ON(operation sound on)
W OFF (operation
sound off)
W ON (operation sound on).
The setting is changed to the selected condition.
NOTEz The memory of the operation sound setting
is erased if the battery is disconnected, and it returns automatically to ON (operationsound on).
z The operation sound setting only deactivates
the operation sound of the multi-information meter switch and daytime dipper button. The
warning display and other sounds cannot be deactivated.Changing the time until “REST
REMINDER” is displayed
The time until the display appears can be changed. 1. Press and hold the multi-information
meter switch for about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
Multi-information display
5-232*$((Instruments and controls5 Type 1
Type 2

2.Lightly press the multi-information me-
ter switch to select “ALARM” (rest time
setting).3. Press and hold the multi-information
meter switch for about 2 seconds or more to display “ALARM” (rest time
setting).Type 1Type 2
4. Lightly press the multi-information me-
ter switch to select the time until the dis- play.
5. Press and hold the multi-information
meter switch for about 2 seconds or more, the setting is changed to the selec- ted time.
NOTEz If the battery is disconnected, the unit setting
is erased from memory and is automatically
set to OFF.
z The drive time is reset when the ignition
switch is turned off or the operation mode is
put in OFF.Changing the turn-signal sound
It is possible to change the turn-signal sound.
1. Press and hold the multi-information
meter switch for about 2 seconds ormore to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select
(changing the
turn-signal sound).
Multi-information display
5-242*$((Instruments and controls5Type 1
Type 2 Type 1
Type 2

3.Press and hold the multi-information
meter switch for about 2 seconds or more to switch in sequence from 1 (turn- signal sound 1)
W 2 (turn-signal sound
2)
W 1 (turn-signal sound 1).
The setting changes to the selected turn- signal sound.Changing the momentary fuel
consumption display (Type 2)
It is possible to change the bar graph setting
of the momentary fuel consumption display. 1. Press and hold the multi-information
meter switch for about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera- tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select
(changing the
momentary fuel consumption display)
3. Press and hold the multi-information
meter switch for about 2 seconds or more to switch in sequence from ON(with the green bar graph)
W OFF (with-
out the green bar graph)
W ON (with the green bar graph).
The setting changes to the selected bar
graph setting.
Returning to the factory set-
tings
Many of the function settings can be returned
to their factory settings.
1. Press and hold the multi-information
meter switch for about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch or the opera-
tion mode is ON)” on page 5-18.
2. Lightly press the multi-information me-
ter switch to select “RESET” (returning
to the factory settings).
3. When you press and hold the multi-in-
formation meter switch for about 5 sec-
onds or more, the buzzer sounds and all of the function settings are returned to
the factory settings.
Multi-information display
5-252*$((Instruments and controls5 Type 1
Type 2

NOTEzThe factory settings are as follows.

5- Front fog lamp indication lamp*o p. 5-46
6- Rear fog lamp indication lamp o p. 5-46
7- Anti-lock brake system (ABS) warning lamp o p. 6-37
8- Tyre pressure monitoring system warn- ing lamp* o p. 6-65
9- Brake warning lamp o p. 5-46
10- Cruise control indication lamp* o p. 6-4211- Seat belt warning lamp o p. 4-11
12- Supplement Restraint System (SRS) warning lamp o p. 4-35
13- Check engine warning lamp o p. 5-47
14- Active Stability Control (ASC) OFF in- dicator* o p. 6-40
15- Active Stability Control (ASC) indica- tor* o p. 6-40
16- Auto Stop & Go (AS&G) OFF indica- tion lamp* o p. 6-1817- Auto Stop & Go (AS&G) indication
lamp* o p. 6-15
18- Information screen display list o p. 5-27
19- Information screen display list o p. 5-27
20- Forward Collision Mitigation system (FCM) indicator* o p. 6-50
21- Forward Collision Mitigation system (FCM) OFF indicator* o p. 6-50

Information screen display list
When there is information to be announced, such as lamp reminders, a sound is emitted and the screen switches to the displays shown below.
Refer to the appropriate page and take the necessary measures.When the cause of the warning display is eliminated, the warning display goes out automatically.Refer to “Warning display list (when the ignition switch or the operation mode is OFF)” on page 5-28.
Refer to “Warning display list (when the ignition switch or the operation mode is ON)” on page 5-31.
Refer to “Other interrupt displays” on page 5-42.
NOTEz A warning may be displayed on the information screen and the buzzer may sound in the following rare cases.
This is caused by the system picking up interference such as noise or strong electromagnetic waves, and is not a functional problem.

Warning display list (when the ignition switch or the operation mode is OFF)Screen type 1Screen type 2CauseSolution (Reference)zYou have forgotten to turn off
the lamps.z Refer to “Lamps (headlamps,
fog lamp, etc.) auto-cutout
function” on page 5-49.z The security alarm system is
operating.z Refer to “Security alarm sys-
tem” on page 3-31.
Indication lamp, warning lamp, and information screen display list
5-282*$((Instruments and controls5