MITSUBISHI ASX 2020 Owner's Manual (in English)

5- Front fog lamp indication lamp*o p. 5-44
6- Rear fog lamp indication lamp o p. 5-44
7- Forward Collision Mitigation system (FCM) indicator* o p. 6-49
Radar sensing misacceleration Mitiga-
tion System (RMS) (Forward) indicator*
o p. 6-59
8- Tyre pressure monitoring system warn- ing lamp* o p. 6-749- Brake warning lamp o p. 5-44
10- Cruise control indication lamp* o p. 6-45
11- Seat belt warning lamp o p. 4-11
12- Supplement Restraint System (SRS) warning lamp o p. 4-34
13- Automatic High-Beam (AHB) indicator* o p. 5-50
14- Check engine warning lamp o p. 5-44
15- Active Stability Control (ASC) OFF in- dicator* o p. 6-4316- Active Stability Control (ASC) indica-
tor* o p. 6-43
17- Forward Collision Mitigation system (FCM) OFF indicator* o p. 6-54
Radar sensing misacceleration Mitiga-
tion System (RMS) (Forward) OFF indi-
cator* o p. 6-63
18- Information screen display list o p. 5-25
19- Anti-lock brake system (ABS) warning lamp o p. 6-40

Information screen display list
When there is information to be announced, such as lamp reminders, a sound is emitted and the screen switches to the displays shown below.
Refer to the appropriate page and take the necessary measures.
When the cause of the warning display is eliminated, the warning display goes out automatically.
Refer to “Warning display list (when the ignition switch or the operation mode is OFF)” on page 5-26.
Refer to “Warning display list (when the ignition switch or the operation mode is ON)” on page 5-29.
Refer to “Other interrupt displays” on page 5-40.
NOTEz A warning may be displayed on the information screen and the buzzer may sound in the following rare cases.
This is caused by the system picking up interference such as noise or strong electromagnetic waves, and is not a functional problem.

Warning display list (when the ignition switch or the operation mode is OFF)ScreenCauseSolution (Reference)zYou have forgotten to turn off the lamps.zRefer to “Lamps (headlamps, fog lamp,
etc.) auto-cutout function” on page 5-46.z The security alarm system is operating.z Refer to “Security alarm system” on page
3-33.
Indication lamp, warning lamp, and information screen display list
5-262*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThere is a fault in the keyless operation
system.z Refer to “Keyless operation system” on
page 3-08.z There is a fault in the electronic immobil-
izer (Anti-theft starting system).z We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
Indication lamp, warning lamp, and information screen display list
5-272*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThe keyless operation key is not detected.zInsert the keyless operation key into the
key slot in the glove box.
Refer to “If the keyless operation key is not operating properly” on page 3-20.z You have forgotten to remove the keyless
operation key from the key slot in the
glove box.z Remove the keyless operation key from
the key slot in the glove box.z The steering wheel is locked.z Press the engine switch.
Refer to “Steering wheel lock” on page
3-17.z The engine is stopped while the selector
lever is in a position other than the “P” (PARK) position.z On vehicles with CVT, move the selector
lever to the “P” (PARK) position to put
the operation mode in OFF.z The driver

ScreenCauseSolution (Reference)zThere is a fault in the electrical system.z Immediately stop the vehicle in a safe
place. We recommend you to consult a MITSUBISHI MOTORS Authorized
Service Point.

Warning display list (when the ignition switch or the operation mode is ON)ScreenCauseSolution (Reference)
(if so equipped)
z The washer fluid is running low.zReplenish the container with washer fluid.
Refer to “Washer fluid” on page 10-06
Refer to “Capacity” on page 11-11.z There is a fault in the EPS.z Have the vehicle inspected by a
MITSUBISHI MOTORS Authorized
Service Point as soon as possible.
Refer to “Electric power steering system (EPS)” on page 6-26.
Indication lamp, warning lamp, and information screen display list
5-292*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThere is a fault in the keyless operation
system.z Refer to “Keyless operation system” on
page 3-08.
Indication lamp, warning lamp, and information screen display list
5-302*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThe brake fluid level in the reservoir has
fallen to a low level.
z There is a fault in the brake system.zImmediately stop the vehicle in a safe
place.
We recommend you to consult a MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Brake warning display” on page 5-45.z There is a fault in the ABS.z Avoid sudden braking and high-speed
driving, stop the vehicle in a safe place, and take corrective measures. Refer to“ABS warning” on page 6-40.z The tyre pressure in one of the tyres is
low.z Refer to “Tyre pressure monitoring sys-
tem (TPMS)” on page 6-73.z There is a fault in the tyre pressure moni-
toring system.z Refer to “Tyre pressure monitoring sys-
tem (TPMS)” on page 6-73.z One of the doors or the tailgate is not
completely closed.
The open door is displayed.z Close the door or tailgate.
Refer to “Door ajar warning display screen (when the ignition switch or the operation mode is ON)” on page 5-17.
Indication lamp, warning lamp, and information screen display list
5-312*$(20(1Instruments and controls5

ScreenCauseSolution (Reference)zThe bonnet is open.zClose the bonnet.
Refer to “Bonnet” on page 10-03.z There is a fault in the electronic immobil-
izer (Anti-theft starting system).z Put the operation mode in OFF, and then
start the engine again.
If the warning is not cancelled, please
contact a MITSUBISHI MOTORS Au-
thorized Service Point.z The driver

ScreenCauseSolution (Reference)zThe engine is overheated.zStop the vehicle in a safe place and take
corrective measures.
Refer to “Engine overheating” on page 8-04.z The automatic transmission (CVT) fluid
temperature is too high.z Refer to “Automatic transmission IN-
VECS-III Sports Mode 6CVT (Intelligent & Innovative Vehicle Electronic Control
System III)” on page 6-22.z You turned the ignition switch to the
“ON” position or put the operation mode
in ON without fastening your seat belt.z Fasten your seat belt properly. Refer to
“Driver

ScreenCauseSolution (Reference)zThere is a fault in the engine oil circula-
tion system.z Immediately stop the vehicle in a safe
place. We recommend you to have it checked.
Refer to “Oil pressure warning display” on page 5-46.z There is a fault in the charging system.zImmediately stop the vehicle in a safe
place. We recommend you to consult a MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Charge warning display” on page 5-46.z There is a fault in the SRS airbag or the
pretensioner system.z We recommend you to have it checked,
immediately.
Refer to “Supplemental restraint System (SRS) warning lamp” on page 4-34.z There is an automatic headlamp levelling
fault.z We recommend you to have it checked.
Refer to “Automatic headlamp levelling” on page 5-54.z There is a fault in the Active Stability
Control (ASC).z We recommend you to have it checked.
Refer to “Active Stability Control (ASC)”
on page 6-42.z There is a fault in the hill start assist.zHave the vehicle checked at a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Hill start assist” on page 6-37.
Indication lamp, warning lamp, and information screen display list
5-342*$(20(1Instruments and controls5